JBL CONTROL X Bruksanvisning

JBL högtalare CONTROL X

Läs nedan 📖 manual på svenska för JBL CONTROL X (72 sidor) i kategorin högtalare. Denna guide var användbar för 23 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/72
CONTROL X
2-way 5.25" (133mm) Indoor / Outdoor Speakers
OWNER’S MANUAL
The JBL® brand has been involved in every aspect of music,
film recording and reproduction from live performances to the
recordings you play in the home, car, or on-the-go.
We’re confident that the JBL system you have chosen will provide
every note of enjoyment that you expected and that when you think
about purchasing additional audio equipment for your home, car or
office, you will once again choose a JBL product.
The JBL Control X is an advanced indoor/outdoor* loudspeaker
system that allows you to enjoy your favorite music in remote
locations around the home or in commercial spaces. To ensure
trouble-free performance, please carefully read these instructions
completely before connecting or using the system.
* Please note that while the JBL Control X is an all-
weather outdoor loudspeaker, it is not waterproof. These
speakers should NOT be submerged or directly exposed
to water, ice, snow or sustained moisture. Do not spray
water into the speaker’s rear port.
THANK YOU FOR CHOOSING THIS JBL® PRODUCT
ENGLISH
2
UNPACKING THE SYSTEM
Carefully unpack the system. If you suspect damage from transit,
report it immediately to your dealer and/or delivery service. Keep
the shipping carton and packing materials for future use. Open the
package and verify the following contents:
INCLUDED
2 x JBL Control X speakers
2 x Adjustable wall-mount brackets
(includes bar wrench and security cables)
1 x Owner’s Manual
PLACING THE SPEAKERS
These speakers can be mounted or placed on a stand, shelf
or table. The following figures show two possible indoor applications
and one outdoor application.
For optimal performance, do not block the rear port on the back of
each speaker.
Application 1: Adding speakers to a home theater system.
Left
Surround
Channel
Right
Surround
Channel
Left Front
Channel
Subwoofer
Right Front
Channel
Left
Rear
Channel
Right
Rear
Channel
Center
Channel
Couch
TV
Application 2: Adding speakers to remote locations in your home.
Left Rear
Channel
Right Rear
Channel
Center Rear
Channel
Left Front
Channel
Right Front
Channel
45 o
Application 3: Installing speakers horizontally under eaves
outside your home.
CONNECTING THE SPEAKERS
CAUTION: Make sure that all of the system’s electrical components
are turned OFF (and preferably unplugged from their AC outlets) before
making any connections.
Connect your speaker wire to the post terminals on the rear of the
speaker. Banana plugs may be used for convenience. Please note if
your speaker wire features a polarity stripe to help distinguish its two
conductors. Use this polarity stripe to ensure that you are connecting
the positive (+) terminal on the JBL Control X speakers to the positive
(+) terminal on the amplifier, and connect the negative (–) speaker
terminal to the negative (–) terminal on the amplifier. It does not matter
whether you use the striped conductor for connecting the postive (+)
terminals or the negative (–) terminals.
Do not reverse polarities (i.e., “+” to “–” or “–” to “+”) when making
connections. Doing so will cause poor stereo imaging and diminished
bass performance.
IMPORTANT: Make sure the (+) and (–) wires or connectors do not
touch each other or the other terminal. Touching wires can cause a
short circuit that can damage your receiver or amplifier.
3
www.jbl.com
ENGLISH
WALL-MOUNTING THE SPEAKERS USING
INCLUDED WALL BRACKETS
Adjustable wall brackets are included for the JBL Control X speakers.
The included brackets are for wall-mounting only.
Ceiling-mounting these JBL Control X speakers is not recommended,
regardless of the bracket used.
IMPORTANT SAFETY NOTE: Proper selection of mounting
hardware not included herein, and proper assembly and
installation of brackets, in cluding, but not limited to, selection
of appropriate weight-bearing support and bracket use with
the specified speaker only is the exclusive responsibility of the
customer. Manufacturer disclaims any liability for the selection of
mounting hardware and/or bracket installation.
A. Loosen and remove the molded nut (2) by turning it counterclockwise.
Use the supplied metal bar (5) if necessary by inserting it in one of the
holes on the molded nut (2).
B. Pull the ball/shaft (3) out of the wall bracket (4).
C. Slide the molded nut (2) onto the ball/shaft (3) with threaded opening
facing the ball, and thread on the metal nut (1) all the way onto the
ball/shaft (3), with the nut’s (1) “knurled” surface facing away
from the ball.
D. Screw the ball/shaft (3) into the threaded 3/8"-16 insert (6) on the
back of the speaker cabinet until it is fully seated against the bottom
of the insert. Back out the ball-shaft assembly one half turn and
tighten the nut against the speaker. If the ball and shaft assembly
is not backed out before tightening the nut, performing Step G
below may dislodge the threaded insert in the speaker housing and
permanently damage the speaker.
E. Tighten the “knurled” nut (1) using a crescent wrench until it is firmly
seated against the back of the speaker and has fully locked the ball/
shaft (3) and the speaker cabinet together. Please note that once
this nut is tightened, it may embed some marks on the back of the
speaker where the attachment is made. However, these marks will be
covered by the nut (1).
F. The security cable (8) is provided as an additional measure to prevent
the speaker from falling in case the speaker becomes detached from
the wall bracket. One of the two lower screws (9) that attach the wall
bracket (4) to the wall will need to go through the eyelet (11) at the
end of the cord before going through the wall-bracket hole. Make sure
that the screw head is at least 0.36" (approximately 3/8") or larger in
diameter so that it can properly hold the backup cord eyelet (11).
G. Mount the wall bracket (4) onto a wood stud on the wall, using #10,
minimum 1", panhead wood screws. Make sure that all four screws
are driven into the stud, not drywall.
If the bracket needs to be mounted on drywall, the use of properly
selected and installed wall anchors and screws is essential.
H. Securely attach the other end (10) of the security cable (8) to the
Control X by engaging it through the bar (12) on the back speaker,
as shown in the illustration.
I. Connect your speaker wire to the terminals (13) on the rear of
the speaker. Be sure to leave enough cable if mounting speakers in
horizontal position.
J. Holding the speaker cabinet (7) with both hands, reinsert the ball
portion of the ball/shaft (3) into the wall bracket (4).
K. Hand-tighten the molded nut (2) while positioning the speaker for the
intended orientation.
L. Once the orientation of the speaker is finalized, use the metal bar (5) in
one of the holes on the molded nut (2) and tighten securely.
DO NOT OVERTIGHTEN THE MOLDED NUT (2).
HORIZONTAL ORIENTATION
LEFT SPEAKER RIGHT SPEAKER
Note: Be sure to rotate the JBL grille badge 90 degrees if you are
mounting these speakers in the horizontal position. Simply
remove the grille, push the badge from the inside and rotate
it accordingly.
INCORRECT
CORRECT

Produktspecifikationer

Varumärke: JBL
Kategori: högtalare
Modell: CONTROL X

Behöver du hjälp?

Om du behöver hjälp med JBL CONTROL X ställ en fråga nedan och andra användare kommer att svara dig


högtalare JBL Manualer

JBL

JBL 4312EBK Bruksanvisning

12 Januari 2025
JBL

JBL Studio SUB 260P Bruksanvisning

10 Januari 2025
JBL

JBL B-6ICDT Bruksanvisning

7 Januari 2025
JBL

JBL B-8IC Bruksanvisning

7 Januari 2025
JBL

JBL 4349 Bruksanvisning

7 Januari 2025
JBL

JBL Tower X Marine MT10HLW Bruksanvisning

6 Januari 2025
JBL

JBL Control CM42AW Bruksanvisning

1 Januari 2025
JBL

JBL Performance P36AW Bruksanvisning

1 Januari 2025
JBL

JBL Balboa 30 Bruksanvisning

1 Januari 2025
JBL

JBL 250Ti Bruksanvisning

1 Januari 2025

högtalare Manualer

Nyaste högtalare Manualer

Alto

Alto ELVIS 15.2XL Bruksanvisning

16 Januari 2025
Alto

Alto PS 4L Bruksanvisning

16 Januari 2025
Alto

Alto MS8 Bruksanvisning

16 Januari 2025
Alto

Alto OEX900 Bruksanvisning

16 Januari 2025
Alto

Alto Tourmax SXA18 Bruksanvisning

16 Januari 2025
Alto

Alto MS12SA Bruksanvisning

16 Januari 2025
Alto

Alto PS 5L Bruksanvisning

16 Januari 2025
Alto

Alto Micro 4 Bruksanvisning

16 Januari 2025
Alto

Alto MS8MA Bruksanvisning

16 Januari 2025
Karma

Karma BM 115RX Bruksanvisning

16 Januari 2025