JennAir JFC2290VEM Bruksanvisning

JennAir kylskåp JFC2290VEM

Läs nedan 📖 manual på svenska för JennAir JFC2290VEM (10 sidor) i kategorin kylskåp. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/10
Decorator Panel Dimensions and Installation.
Three Panel Method
Routed Raised Panel Method
Refrigerator Door
Routed Area
Front Panel ( 3/4" Max.)
Backing Panel ( 1/4")
Trim Frame
Surrounding Door
Refrigerator Door
Front Panel ( 3/4" Max.)
Backing Panel ( 1/4")
Trim Frame
Surrounding Door
Spacer Panel ( 1/16")
12884405 06/08
Spacer
Panel
16-3/4
(425mm)
43-3/16
(1097mm)
23
(584mm)
34-3/4
(883mm)
1/16
(2mm)
Front
Panel
17-3/4
(451mm)
44-1/8
(1121mm)
24
(610mm)
35-3/4
(908mm)
3/4 max
(19mm)
Backing
Panel*
17-3/8
(441mm)
43-13/16
(1113mm)
23-9/16
(599mm)
35-5/16
(897mm)
1/4
(6mm)
Panel
Type
* For ease of installation cut backer panel corners at
45° - 1 x 1
1" (25.4mm)
Typ.
A
B
C
D
Thickness
Suggested Panel Assembly Methods
WEIGHT REQUIREMENTS FOR PANEL INSERTS
Individual refrigerator door panels should not exceed 15 lbs. (7 kg).
Freezer drawer panel should not exceed 15 lbs. (7 kg).
A
B
C
D
Door Panel
WARNING
Excessive Weight Hazard
Use two or more people to move and install
refrigerator.
Failure to do so can result in back or other injury.
1. Lift upper locking trim from the door .
Installation common with all panels.
2. Remove side trim from either side of door.
Remove backing from adhesive tape.
NOTE: Consult your cabinetmaker for creation
of decorator panels. Customer to provide own
handles.
See user guide for door removal if necessary.
NOTE: For ease of assembly and to familiarize
yourself with the installation process, add the
custom panel to the lower freezer drawer first.
Before removing backing from adhesive
tape assure the decorator panel fits the
door.
Decorator Panel Installation
Backing Panel
Spacer Panel
Trim
Front Panel
Door
4. Assure the side trim clip locates to the inside
corner of the lower fixed trim.
5. Rotate one piece of the side trim to seat into
the decorator panel groove.
6. Repeat procedure for opposite side of door.
8. Assure the upper locking trim grooves
engage the rivets on the door panel while
simultaneously seating into the decorator
panel groove.
9. Apply firm pressure to the upper locking
trim to hold panel in place.
3. Align the bottom edge of the decorator panel
to the lower fixed trim and center the panel with
the door.
7. Align the upper locking trim with the clips on
top of the side trim.
Front
Panel
SIDE
CLIP
SIDE TRIM
CLIP
10. Fully seated top trim is close to flush with top
of door and completely covers clips of side trim.

Produktspecifikationer

Varumärke: JennAir
Kategori: kylskåp
Modell: JFC2290VEM

Behöver du hjälp?

Om du behöver hjälp med JennAir JFC2290VEM ställ en fråga nedan och andra användare kommer att svara dig




kylskåp JennAir Manualer

kylskåp Manualer

Nyaste kylskåp Manualer