Joy Sport Higol X-Ciser STD-68 Bruksanvisning

Joy Sport Motionscykel Higol X-Ciser STD-68

Läs nedan 📖 manual på svenska för Joy Sport Higol X-Ciser STD-68 (14 sidor) i kategorin Motionscykel. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/14
USER MANUAL
Higol
X-Ciser STD-68
Joy Sport Importer
Fitness-Import
Timmermannsweg 46
5813 AP Ysselsteyn (LB)
info@joysport.nl
www.joysport.nl
Dear customer,
We want to thank you for having chosen a JOY SPORT product, and wish you a lot
of fun and success during training with your JOY SPORT exercisers.
Please note and follow the enclosed safety and assembly instructions carefully.
If you have questions please do not hesitate to contact us.
Guarantee,
This guarantee covers all manufacturing and material flaws on JOY SPORT products
purchased from an authorized JOY SPORT dealer for a period of 24 months from
purchase.
If you wish to make a claim under the guarantee, JOY SPORT shall be entitled to
repair or replace the defective unit or part at its discretion.
The owner of the unit must pay for the transport costs and any dealer's workshop
costs.
To make a claim under the guarantee, take your facture to your dealer.
The dealer will then take the necessary action.
If this is not possible, contact your national JOY SPORT importer.
The following are not covered by the guarantee : normal wear and tear and the
consequences of improper treatment or damage caused by the purchaser or third
persons and faults which are due to other circumstances.
Claims may not be made under the guarantee if modifications have been made to
the original construction or equipment or if JOY SPORT original parts were not used
to repair the unit.
In no event the manufacturer shall be liable for incidental or
consequential losses, damages or expenses in connection with exercise products.
Fitness-Import
Timmermannsweg 46
5813 AP Ysselsteyn (LB)
info@joysport.nl
www.joysport.nl
STD-68 INSTRUCTION USE
1) The model STD-68 is designed to be used as a “spin “ cycle in fitness studios and health
clubs. It has a fixed wheel driven flywheel and should only be used under professional
supervision.
2) Installation – it is important that the STD-68 is correctly assembled and we recommend
that suitably qualified personnel carry out installation and assembly
.
3) Handlebar and seat adjustment. It is important that the handlebar and seat are set at
the correct height for your body. Ask your instructor for assistance. Adjusting the
handlebar height-Undo the knob that is located where the H-bar post fits into the frame.
Slide the handlebar post up or down to the required height and retighten the knob. Make
sure it is securely tightened and that there is no lateral or vertical movement of the
handlebar. The handlebar position can also be adjusted forwards or backwards. Undo
the Release lever located below the H-bar slider. Slide the handlebar assembly forwards
until you reach the required position. Then securely re-tighten the Release lever.
Adjusting the seat height- undo the knob located where the seat post fits into the frame.
Adjust the seat to the required height. Then retighten the knob. Make sure it is tight
enough to prevent the seat from twisting side to side. The seat position can be adjusted
forwards and backwards. Undo the knob located directly side of the seat slider. Loosen
the knob then slide the seat to the required position. Then make sure the knob retighten.
4) Pedals and toe straps- your feet should be securely positioned in the toe clips during
the exercise. Put your foot as far forwards as you can into the toe-clip and then pull the
strap tight.
5) The STD-68 should operate on a level surface with no lateral movement. There is height
adjuster caps located on either side underneath the rear foot. Turn these caps clockwise
or anti-clockwise until the bike is totally stable on the ground.
6) Emergency brake – Press down knob (31) of resistance system for stop.
7) Maintenance – It may be unsafe when loosen bolt on the parts or noise on the flywheel,
please contact your supplier. Like any other mechanical cycling device, the STD-68
should be regularly maintained. Ask your supplier for a detailed maintenance program.

Produktspecifikationer

Varumärke: Joy Sport
Kategori: Motionscykel
Modell: Higol X-Ciser STD-68

Behöver du hjälp?

Om du behöver hjälp med Joy Sport Higol X-Ciser STD-68 ställ en fråga nedan och andra användare kommer att svara dig




Motionscykel Joy Sport Manualer

Motionscykel Manualer

Nyaste Motionscykel Manualer