Juki DLU-5494N-7 Bruksanvisning

Juki Symaskin DLU-5494N-7

Läs nedan 📖 manual på svenska för Juki DLU-5494N-7 (52 sidor) i kategorin Symaskin. Denna guide var användbar för 11 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/52

INSTRUCTION MANUAL

DLU-5494N-7/SC-922/M51N/IT-100A

CONTENTS

1. PREFACE...................................................................................................................................... 1

2. SET-UP .......................................................................................................................................... 1

(1) Installing the motor unit 1 .......................................................................................................................

(2) Installing the control box 2 .....................................................................................................................

(3) Installing the belt 2 ..................................................................................................................................

(4) Adjusting the pulley cover 3 ...................................................................................................................

(5) Installation and adjustment for the protecting pin and the belt slip-off preventing bracket 4 .........

(6) Connecting the cords 5 ...........................................................................................................................

(7) Attaching the connecting rod 13 ............................................................................................................

(8) Installing the operation display panel 14 ...............................................................................................

(9) How to use the operation display panel 14 ...........................................................................................

(10) Adjusting the bottom feed pitch display 15 .........................................................................................

3. INSTALLING THE OPERATION PANEL 15 ....................................................................................

4. HOW TO USE THE OPERATION PANEL .................................................................................. 16

(1) Names and functions of each components 16 ......................................................................................

(2) Adjusting the contrast of the operation panel display 17 ....................................................................

(3) Production control switch connecting connector 18 ...........................................................................

(4) USB port 18 ..............................................................................................................................................

5. SCREEN LIST 19 .............................................................................................................................

(1) Fundamental screen list 19 .....................................................................................................................

(2) Pop-up list 20 ...........................................................................................................................................

(3) Other screens 21 ......................................................................................................................................

(4) Transition of screen 22 ............................................................................................................................

6. OPERATING PROCEDURE OF THE SEWING PATTERN 23 ........................................................

(1) Selecting procedure of the sewing pattern 23 ......................................................................................

(2) Editing procedure of the sewing pattern 23 ..........................................................................................

(3) Teaching mode 26 ....................................................................................................................................

(4) Selecting the sleeve to be sewn 26 ........................................................................................................

(5) Selection of the alternate sewing 27 ......................................................................................................

(6) Insertion and deletion of the step 28 .....................................................................................................

(7) Operating procedure of the number of stitches of the reverse stitching 29 ......................................

7. PATTERN OPERATION 30 ..............................................................................................................

(1) Sewing pattern register 30 ......................................................................................................................

(2) Copy of the sewing pattern 32 ...............................................................................................................

(3) Deletion of the sewing pattern 33 ...........................................................................................................

8. HOW TO USE THE BOBBIN THREAD COUNTER 34 ...................................................................

9. NO. OF PCS. COUNTER ............................................................................................................ 35

10. PRODUCTION SUPPORT FUNCTION .................................................................................... 35

11. BOTTOM FEED AMOUNT DISPLAY ........................................................................................ 36

12. RE-SEWING SWITCH ............................................................................................................... 36

13. NEEDLE UP/DOWN COMPENSATION SWITCH .................................................................... 36

14. ON/OFF SWITCH OF THE MATERIAL EDGE SENSOR 37 ...................................................

15. AUTOMATIC THREAD TRIMMING SWITCH ..................................................................... 37

16. ONE-SHOT AUTOMATIC STITCHING SWITCH ................................................................ 37

17. THREAD TRIMMING PROHIBITION SWITCH ................................................................... 38

18. KEY-LOCK FUNCTION SETTING ............................................................................................ 38

19. INFORMATION ......................................................................................................................... 39

(1) Information operator level 39 ..................................................................................................................

(2) Setting for functions 42 ...........................................................................................................................

(3) External interface 47 ................................................................................................................................

20. ERROR DISPLAY 47 .....................................................................................................................

(1) Error code list (Error display in panel) 48 .............................................................................................

– 1 –

For setup or handling of DLU-5494N-7 (1-needle, bottom and variable top feed lockstitch machine with auto-

matic thread trimmer), refer to the Instruction Manual for DLU-5494N-7.

In addition, for the details of handling of SC-922 (sewing machine controller) and IT-100, similarly, refer to the

respective Instruction Manuals.

The SC-922 can be used with the direct-motor type machine head as a stand-alone control box.

It can also be used with the belt-driven type machine head by installing on the motor unit.

Install the control box on the motor unit following the instructions given below.

2. SET-UP

1. PREFACE

❶

❷

❸

❹

❶

(1) Installing the motor unit

Install the motor unit on the table with the tting bolt

(asm.) supplied with the unit as accessories.

At this time, insert the nuts and washers supplied

with the unit as accessories as shown in the gure

so that the motor unit can be securely xed on the

table.

1) Press three bolts ❶ supplied with the unit as

accessories into the motor hanging bolt hole in

the table and x them.

2) Temporarily tighten convex washer ❷, spring

washer ❸ and nut ❹ on the side where two bolts

are attached.

3) Hang the motor unit to the washer which has

been temporarily tightened, and attach convex

washer ❷, spring washer ❸ and nut ❹ to the

other bolt on the opposite side.

4) After adjusting the installing position of the motor,

securely tighten the respective nuts ❹.

Produktspecifikationer

Varumärke:	Juki
Kategori:	Symaskin
Modell:	DLU-5494N-7
Färg på produkten:	Zwart
Vikt:	1400 g
Höjd (max):	813 mm
Maximal viktkapacitet:	- kg
Avsedd för:	Gitaar
Vikt (imperialistisk):	3.1 lbs
Längd hopfälld:	533 mm
Antal ben/ben:	3 poot/poten