Jung ENOAL299 Bruksanvisning

Läs nedan 📖 manual på svenska för Jung ENOAL299 (5 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/5
EnOcean radio transmitter
05.03.20211 / 50024000901
EnOcean radio transmitter
Ref.-no.: ENO A 590 .., ENO LS 990 ..
ENO A 595 .., ENO LS 995 ..
Operating instructions
1 Safety instructions
Electrical devices may only be mounted and connected by electrically skilled persons.
Serious injuries, re or property damage possible. Please read and follow manual fully.
The radio communication takes place via a non-exclusively available transmission path, and is therefore not
suitable for safety-related applications, such as emergency stop and emergency call.
These instructions are an integral part of the product and must remain with the end customer.
2 Device components
Fig. 1: Device components
(1) Adhesive pad
(2) Holder plate
(3) Frames (not included in delivery)
(4) Radio module
(5) Rockers
(6) Retaining screw
Fig. 2 and g. 3: Transport lock and protective lm
(7) Transport lock for rockers
(8) Protective lm for holder plate
1
6
23
4
5
8
7
GB
EnOcean radio transmitter
05.03.20213 / 50024000901
Adhesive xing
Important:
The nal strength of the adhesive is only reached after 24 hours.
After gluing the holder plate, let the adhesive cure a little.
Important:
The installation location cannot be changed after the adhesive xing.
To test the range, carry out commissioning before adhesive xing.
Prerequisite:
Surface is dry, clean, stable and even.
Suitable cleaning agents:
water, degreaser, glass cleaner, methylated spirit
Not suitable for cleaning:
Bath or all-purpose cleaner, aggressive detergents
Remove the protective lm from the back of the adhesive pad (1).
Stick the adhesive pad aligned on the surface.
Press rmly for about 10 seconds.
Remove the protective lm (8) for the holder plate (2).
Do not remove the remaining protective lms.
Stick the holder plate onto the adhesive pad.
5 Operation
Fig. 5: Operation
Operating elements
The radio transmitter is operated either via one rocker (2-channel) or via two rockers (4-channel). There are four
push-buttons (9) under the rockers. The push-buttons are grouped into two channels (A and B). A distinction is made
between two states (I and O) for each channel.
The functions of the rockers (switching, push-button, dimming or blind) are not congured in the factory settings of the
device.
Factory settings/Reset
Restoring factory settings:
Remove rockers (5) carefully with a suitable tool (e.g. button lever).
Press all four push-buttons (9) and press the activation bar (10) simultaneously 7 x.
Factory settings are restored automatically.
The radio transmitter is no longer taught-in.
Rockers are without function.
Snap rockers on again.
10
9
9
9
9

Produktspecifikationer

Varumärke: Jung
Kategori: Inte kategoriserad
Modell: ENOAL299

Behöver du hjälp?

Om du behöver hjälp med Jung ENOAL299 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Jung Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer