Kenwood Excelon CA-PLT98 Bruksanvisning

Kenwood Inte kategoriserad Excelon CA-PLT98

Läs nedan 📖 manual på svenska för Kenwood Excelon CA-PLT98 (2 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/2
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new product.
© 2023 JVCKENWOOD Corporation
CA-PLT98
XM160-2-98 AMPLIFIER SIDE PLATE DESIGNED AND ENGINEERED FOR
1998-2013 HARLEY-DAVIDSON® FLH “BATWING” MOTORCYCLES
INSTRUCTION MANUAL
JVCKENWOOD Corporation
Important Notes
©2023 JVCKENWOOD Corporation. All Rights Reserved. KENWOOD® and eXcelon®
are registered trademarks of JVCKENWOOD Corporation. Harley-Davidson®, Electra
Glide®, Road Glide®, Street Glide®, Ultra Classic®, Tri Glide®, CVO™, Screamin Eagl
and Tour-Paare trademarks or registered trademarks of Harley-Davidson, Inc. and/
or its affiliates and if used or implied are for reference only. There is no affiliation
between Harley-Davidson, Inc. and/or its aliates and JVCKENWOOD Corporation
and/or its aliates. All other trademarks are the property of their respective owners.
Specications subject to change without notice.
XM160-2-98 Amplier Side Plate Installation Instructions
Installation procedure
1. On the brake side of the bike, remove the 3 factory bolts shown by the white arrows in
Fig. 1.1, noting the brake side fairing support bracket will be removed, and not re-used.
2. Install the plate into the bike using the factory fasteners just removed, noting it’s best to
loosely install all 3 fasteners before tightening.
3. Using the supplied “hook and loop” material, secure the amplier to the plate so it’s
oriented with the power harness at the bottom. The extra length of that amp will sit
below the main plate by approx.. 1/2 and to the left (brake side) by approx. 1/2, so the
outer fairing will go back on. You will need to adjust accordingly.
NOTE: This kit includes a wire harness with white/black and red/black wires. If you already
have an existing XM160-2-98 and are adding a second XM160-2-98, the supplied harness
will plug into the “bypass out on the existing XM160-2-98. This is what sends music from
the existing XM160-2-98 to the second XM160-2-98. The white/black pair of wires on the
supplied harness will plug into the yellow/black wires (clutch side input) on the second
XM160-2-98. The red/black wires on the supplied harness will plug into green/black (brake
side input) on the second XM160-2-98. KENWOOD lids and lower fairing speaker kits come
with harnesses to get music from the amplier to them. For other installs, you can modify
the output harness that came with your amplier, noting that the blue is the brake side,
and the brown is the clutch side.
Fig 1.1
For updated information (the latest Instruction Manual, etc.),
please visit the following website:
https://manual.kenwood.com/en_contents/search/

Produktspecifikationer

Varumärke: Kenwood
Kategori: Inte kategoriserad
Modell: Excelon CA-PLT98

Behöver du hjälp?

Om du behöver hjälp med Kenwood Excelon CA-PLT98 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Kenwood Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer