Kenwood XM50R Bruksanvisning

Kenwood högtalare XM50R

Läs nedan 📖 manual på svenska för Kenwood XM50R (6 sidor) i kategorin högtalare. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/6

Take the time to read through this instruction manual.

Familiarity with installation and operation procedures will help you obtain the best performance from your new power amplier.

For your records

Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the

model and serial numbers whenever you call upon your KENWOOD dealer for information or service on the product.

Model XM50F Serial number

Model XM50R Serial number

US Residents Only

XM50F

XM50R

5.25” COAXIAL SPEAKERS DESIGNED AND ENGINEERED TO CONNECT

AND MOUNT TO 2006-2013 HARLEY-DAVIDSON® TOURING MODEL

MOTORCYCLES WITH ADVANCED AUDIO RADIOS OR 1998-2013

HARLEY-DAVIDSON® TOURING MODEL MOTORCYCLES WITH 2 OHM

STABLE AMPLIFIERS INSTALLED

INSTRUCTION MANUAL

JVCKENWOOD Corporation

Contents

Section 1: XM50F Front Speaker Installation Instructions....3

Section 2: XM50R Rear Speaker Installation Instructions.....4

Warranty Info.................................................................................5

KENWOOD XM50F and XM50R speakers will work

best when powered by an amplier. They have an

imedance of 2 ohm and will cause damage if wired

directly to the built-in radio power in ‘98-’05 factory

Harley Davidson motorcycles.®

Safety precautionsSafety precautions

CAUTION

To avoid the risk of human injury o r pro perty

damage, be sure to read and observe the following

safety precautions:

• Consult a professional technician for installing and

connecting the speaker. — Incorrect installation may

lead to trac accidents or malfunctions.

• Avoid installation where the speaker in unstable. —

Make sure that the speaker is stationary and does not

rattle. Displacement of the speaker may cause injury.

• Do not modify the speaker. — Doing so may result in

smoke or re.

• Keep the volume of sound at an optimum level. —

Not being able to hear sounds from your surroundings

can lead to trac accidents.

• In case of abnormality, stop the use and disconnect

the speaker. — If operation is continued, smoke or re

may result. Disconnect the speaker and ask servicing.

• Always wear protective eyewear during installation.

• To prevent short-circuit, keep all wiring away from

moving parts, sharp edges, cut metal, etc.

• When removing or installing the grille, be careful not

to brush the unit with the edge of the grille.

• Do not switch ON power until wiring is completed.

FOR PROPER INSTALLATION AND USE

Please read the instructions carefully before using

this speaker:

• Be careful not to accidentally kick or apply any sort of

strong impact to the speaker.

• To prevent damaging the speaker, turn o the power

of the amplier before connecting it to the speaker.

• Do not use the provided parts for other purposes

Otherwise malfunction or re hazard could result.

NOTE

Observe the following cautions to prevent damage

to the speakers:

• You cannot input the same power as “peak power”

continually.

• When the volume is set too high, the sound may be

distorted or abnormal. Reduce the volume promptly in

case of such phenomena.

Section 1 - XM50F Front Speaker Installation

Instructions

Installation procedure

1. With your ignition switch in the “OFF” position, remove your outer fairing/headlamp

assembly and set it aside. Refer to a service manual if you need help with this. It’s always

a good idea to have a towel or something similar on your front fender to avoid dings or

scratches if anything is dropped.

2. Take the 2 wires o each speaker by gently pulling one at a time. Undo the screws that

attach each speaker/grille assembly to the inner fairing and remove them. Gently pull the

stock speaker out of each grille assembly.

3. Although the XM50F speakers will work behind the factory grille cloth, the metal mesh

grilles in this kit are designed to replace the front speaker grille cloth on 1998-2013 HD

Street Glides, Ultras, Classics, and Standards. The factory grille cloth is glued to a plastic

mesh, and together, is two-way taped to the main body of the grille assembly. You can

usually peel away the mesh from the body of the grille by hand. With the factory grille

cloth/mesh o, you should see the exposed two-way tape used to hold the factory mesh

on the main grille body. Before applying the new mesh, have a look as you will see it only

“lines up” one way.

4. “Clip” the XM50F speaker into each grille assembly so the speaker terminals are adjacent

to the thickest part of the speaker/grille assembly. When installed, this puts the speaker

terminals in the 12 o’clock (top) position. You DO NOT want the speaker connectors in

the 6 o’clock (bottom) position, as they may short out against the silver horizontal fairing

bracket. Place your new speaker/grille assembly onto the inner fairing and re-attach each

one using the OE screws. A hand screwdriver is recommended for this step.

5. Since these speakers are a direct replacement for the OE speakers, the female OE

“in-line” connectors mate with the male connectors on each speaker and only go on

one way. If you are replacing previously installed aftermarket speakers, you may need

to re-install the correct sized connectors (not supplied) onto the factory speaker wires,

noting that the smaller connector is the positive (+).

6. Once you are condent the factory wires are correctly attached to the new speakers,

turn on your radio to conrm that both speakers are playing. Then, re-install your fairing/

headlamp assembly.

Produktspecifikationer

Varumärke:	Kenwood
Kategori:	högtalare
Modell:	XM50R

Behöver du hjälp?

Om du behöver hjälp med Kenwood XM50R ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

högtalare Kenwood Manualer

Kenwood KFC-X1720P Bruksanvisning

30 September 2024

Kenwood KFC-WPS1000F Bruksanvisning

22 September 2024

Kenwood Excelon XR-1703HR Bruksanvisning

15 September 2024

Kenwood KFC-1653MRB Bruksanvisning

14 September 2024

Kenwood KS-5200HT Bruksanvisning

14 September 2024

Kenwood Excelon KFC-X174 Bruksanvisning

14 September 2024

Kenwood KFC-P509PS Bruksanvisning

9 September 2024

Kenwood KFC-XS1704 Bruksanvisning

2 September 2024

Kenwood XM50R Bruksanvisning

1 September 2024

Kenwood XM65R Bruksanvisning

29 Augusti 2024

högtalare Manualer

Nyaste högtalare Manualer

Continental Edison CELED53HP20V2B4 Bruksanvisning

27 Oktober 2024

Canton Vento 830.2 Bruksanvisning

27 Oktober 2024

Jamo S7-25C Bruksanvisning

27 Oktober 2024

Bowers Wilkins 707 S2 Bruksanvisning

27 Oktober 2024

Monitor Audio Silver C150 Bruksanvisning

26 Oktober 2024

FBT MITUS 210M Bruksanvisning

26 Oktober 2024

CyberData Systems SIP 011398 Bruksanvisning

26 Oktober 2024

Lamax PartyGo1 Play Bruksanvisning

26 Oktober 2024

IKEA SYMFONISK 405.847.50 Bruksanvisning

26 Oktober 2024

IKEA SYMFONISK 804.923.34 Bruksanvisning

26 Oktober 2024