Keurig K-ICED Bruksanvisning

Keurig kaffebryggare K-ICED

Läs nedan 📖 manual på svenska för Keurig K-ICED (7 sidor) i kategorin kaffebryggare. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/7

ST RON G

Get the most from your

new Keurig® brewer

Use & Care Guide

K•ICED™

Add ice to a tumbler and place on the

drip tray (for more height, remove drip

tray). Lift the handle and place a K-Cup®

pod in the K-Cup® pod holder. Lower the

handle completely to close the lid.

Place Tumbler & Pod

Brew & Enjoy!

Select the BREW OVER ICE button and

then select your brew size. The BREW

OVER ICE and selected brew size lights

will remain illuminated while brewing.

Brewing is complete when all sizes are

illuminated. Lift the handle and dispose

of the K-Cup® pod.

Like your coffee strong? Try the 8oz option!

Note: feature is not available while using STRONG BREW

OVER ICE.

STRONG

TO BREW OVER ICE

STRONG

Place a mug on the drip tray. Lift the

handle and place a K-Cup® pod in the

K-Cup® pod holder. Lower the handle

completely to close the lid.

Place Mug & Pod

Brew & Enjoy!

STRONG

The 3 brew size buttons will blink.

Select and press your brew size.

Brewing is complete when all the

sizes are illuminated.

Lift the handle and dispose of the

K-Cup® pod.

For a bolder brew, the STRONG

button may be turned on before or

after the brew size is selected.

TO BREW HOT

STRONG

Remove packing tape from

brewer. Plug into an outlet.

Place a large mug (10oz

minimum) on the drip tray.

Remove the water reservoir lid, then lift

the reservoir straight up to remove it. If you

have a Keurig® Water Filter (sold separately),

install it now. Refer to your Water Filter

Starter Kit for instructions.

Rinse reservoir with fresh water and fill to

the MAX FILL line.

Replace water reservoir, making sure the tank

is seated properly in the base. Replace lid.

NOTE: Do not use distilled water.

Lift and lower the handle. Do not

insert a K-Cup® pod. The brewer

will power on automatically.

The 3 cup sizes will blink. Press the 8oz

button to start a cleansing brew. Pour

the hot water into the sink.

Do not remove the water reservoir or lift

the handle once the brew button has been

pressed until the brew has completed.

The one-time setup process is now

complete and you are ready to brew!

Before You Brew

Plug & Place Rinse & Fill

Lift & Lower Cleansing Brew

Brew Your First Cup

RONG

STRONG

CAUTION: While brewing, there is extremely hot water in the K-Cup® pod holder. To avoid injury, do not lift the handle during the brewing process. Do not brew into glass.

NOTE: For best results, we recommend one-time use with our K-Cup® pods. A twice-brewed pod won’t provide full flavor, and if the pod holder isn’t lined up with the original

holes, it can cause an overflow of water and coffee grounds.

STRONG

DESCALE

ADD

WATER

Caring For Your Brewer

Regular cleaning keeps your brewer running smoothly. Always be sure to turn off and unplug your brewer before cleaning.

The water reservoir should be

cleaned periodically by wiping the

inside of the reservoir and underside

of the lid with a damp, nonabrasive,

lint-free cloth. Do not dry the inside

of the water reservoir with a cloth, as

lint may remain. Allow the reservoir

to dry completely. Hand-wash only.

Brewer Exterior

Keep your Keurig® brewer looking its

best by cleaning the exterior from

time to time. Just clean with a damp,

soapy, lint-free, nonabrasive cloth.

Never immerse the brewer in water or

other liquids.

Drip Tray

The drip tray overflow should be emptied and

cleaned occasionally. To remove, lift up off

brewer base, keeping it level to avoid spilling.

Rinse and clean with a damp, soapy, lint-free,

nonabrasive cloth. Hand-wash only.

Water Reservoir

STRONG

Brewer Features

BREW OVER ICE: Brew a refreshing iced coffee in minutes.

The BREW OVER ICE feature automatically adjusts brew

temperature — starting hotter to help extract full flavor, then

cooling down for less ice melt.

STRONG BREW: For a bolder, more intense cup.

FAST & FRESH-BREWED: Coffee made in minutes.

BACK-TO-BACK BREWING: Immediately brew a second cup;

no need to wait for reheating.

TRAVEL-MUG FRIENDLY: Accommodates travel mugs up to

7.25” tall.

SIMPLE BUTTON CONTROLS: Just insert any K-Cup® pod and

use the button controls to brew a delicious cup.

MAINTENANCE ALERT: Reminds you to descale after every

250 brews.

COMPATIBLE WITH THE MY K-CUP® UNIVERSAL REUSABLE

COFFEE FILTER:

Brew your own ground coffee (sold separately).

DESCALE MODE: Once in mode, follow guided process to

effectively remove scale from your brewer.

AUTO OFF: Automatically turns your brewer off 5 minutes

after the last brew for energy savings, but will be ready to

brew as soon as it is powered on again.

HIGH ALTITUDE: To ensure your brewer works properly at

higher altitudes (5,000 feet), please enable the High Altitude

Brewing Mode on your brewer.

1. Begin with the brewer plugged in and powered off.

2. Press and hold the button and button for 3 POWER 10oz

seconds. The 12oz button will illuminate to confirm that the

High Altitude Brewing Mode has been enabled.

3. High Altitude Mode will remain enabled until steps 1-2

are repeated and the light turns off and the light 12oz 8oz

turns on to confirm that the High Altitude Brewing Mode is

disabled.

HIGH ALTITUDE BREWING: While holding the brewer handle

up, push down slowly on the K-Cup® pod in the pod holder

until the bottom of the K-Cup® pod is punctured by the exit

needle.

Produktspecifikationer

Varumärke:	Keurig
Kategori:	kaffebryggare
Modell:	K-ICED
Bredd:	191 mm
Djup:	188 mm
Ethernet LAN:	Ja
Maximal upplösning:	4096 x 2160 Pixels
Medföljande kablar:	SATA
Antal USB 2.0-portar:	4
VGA (D-Sub) port(ar):	1
Antal HDMI-portar:	1
Mikrofon, linjeingång:	Ja
Antal Ethernet LAN (RJ-45)-portar:	1
Hörlursutgångar:	1
Certifiering:	- FCC, CE\n- ErP/EuP ready (ErP/EuP ready power supply is required)
HDCP:	Ja
DVI-D-portar:	1
Inkluderad programvara:	- ASRock A-Tuning\n- ASRock XFast LAN\nUEFI\n- ASRock EZ Mode\n- ASRock Full HD UEFI\n- ASRock My Favorites in UEFI\n- ASRock Instant Flash\n- ASRock Internet Flash
Stöder Windows:	Windows 10 x64
Antal portar USB 3.2 Gen 1 (3.1 Gen 1) Typ A:	2
Processoruttag:	LGA 1151 (Socket H4)
Processorfabrikant:	Intel
Maximalt internminne:	32 GB
Ljudutgångskanaler:	7.1 kanalen
Snabbinstallationsguide:	Ja
Ethernet-gränssnittstyp:	Gigabit Ethernet
Chipset moderkort:	Intel® H310
Typ av minnesplats:	DIMM
Ljudchip:	Realtek ALC887
Medföljande drivrutiner:	Ja
Grafikkortsfamilj:	Intel
Minneskanal:	Dubbelkanaals
PCI Express x16 (Gen 3.x)-platser:	1
Antal skärmar som stöds:	2
Gränssnitt för lagringsenheter som stöds:	SATA III
PS/2-port(ar):	1
Komponent för:	PC
LAN-kontroller:	Realtek RTL8111H
DirectX version:	12.0
Antal SATA III-kontakter:	4
Icke-ECC:	Ja
Vakna på LAN:	Ja
Kompatibla processorer:	Intel Celeron, Intel Core i3, Intel Core i5, Intel Core i7, Intel Core i9, Intel Pentium
Minnestyper som stöds:	DDR4-SDRAM
Wifi:	Nee
PCI Express x1 (Gen 2.x)-platser:	1
Harmoniserad systemkod (HS):	84733020
Typer av lagringsenheter som stöds:	HDD & SSD
Moderkort chipset familj:	Intel
Moderkorts formfaktor:	micro ATX
Antal minnesplatser:	2
Minnesklockhastigheter som stöds:	2133,2400,2666 MHz
BIOS-typ:	UEFI AMI
BIOS-minnesstorlek:	128 Mbit
ACPI-version:	6.0
System Management BIOS (SMBIOS) version:	2.7
Stöd för parallell bearbetning:	Niet ondersteund
Anslutning för CPU-kylare:	Ja
Anslutningar för husfläktar:	1
ATX-strömkontakt (24-stift):	Ja
USB 2.0-anslutningar:	1
Anslutning för ljudpanel på framsidan:	Ja
Obuffrat minne:	Ja
USB 3.2 Gen 1 (3.1 Gen 1) anslutningar:	1
TPM-kontakt:	Ja
Chassiintrångsanslutning:	Ja
Inkluderar verktyg:	Ja