Kicker SubStage SF150C09 Bruksanvisning

Kicker Subwoofer SubStage SF150C09

Läs nedan 📖 manual på svenska för Kicker SubStage SF150C09 (7 sidor) i kategorin Subwoofer. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/7
1
SF150C09
Designed for 2009 and newer Ford® F-150 Super-Crew vehicles
Subwoofer Assembly
Subwoofer Power Harness
Subwoofer Body
Harness
25A Fuse
Wire Ties x6
Foam Strips
M6 Bolts x3
M6 Nut Inserts p1-x3
(Requires Nut Insert Tool)
Wire Taps
Adapter Harness
©2012 Stillwater Designs
SF150C09-A1-20121213
2
Power Wire Routing
1. Open the hood, disconnect the negative battery cable.
2. Find the fuse box in the engine compartment and open the cover.
3. Remove the supplied fuse from the fuse holder.
4. Remove the nut on the accessory lug, connect the power wire and retighten the nut. Torque 9Nm. Fig 1
5. Route the power wire across the radiator support and toward the grommet on the passenger’s side of the
rewall. Fig 2.
6. Remove the fasteners retaining the carpet panel below the glove compartment and remove the panel.
7. Make a small incision in the rubber grommet and pass the power wire into the cabin.
8. Install the black connector on the end of the power harness inside the cabin. The black connector should
have a block out plug installed in one side to prevent the power wire from being inserted into the wrong
position in the connector.
9. Connect the black two-pin connector of the power wire to the corresponding connector of the subwoofer
harness.
10. Remove the passenger’s side threshold panel along the bottom of the front door opening.
11. Pull back the rubber door molding and then pull back on the kick panel to remove it. Fig. 3
12. Connect the black ground wire of the subwoofer harness to the factory ground point in the passengers
side kick panel. Torque to 9Nm. Fig. 4
13. Route the subwoofer harness along the door opening and toward the rear of the cab.
Fig. 1
Connect
Power Wire
Here
Grommet
Fig. 2
Fig. 3
Connect black
ground wire of
subwoofer
h h
Fig. 4
3
Subwoofer Input Connection without Optional Amplifi er
14. Connect the adaptor harness to the white two pin connector of the subwoofer body harness.
15. Find the twisted pair of wires in the passenger’s side kick panel that are white with a purple stripe and
white with an orange stripe.
16. Tap the wires using the supplied wire taps. Fig. 5
17. Connect the brown wire of the adaptor harness to the white/purple wire. Connect the green wire of the
adaptor harness to the white/orange wire. Fig. 6
Subwoofer Input Connection with Optional Amplifi er
18. Connect the white two pin connector of the amplifi er harness to the corresponding connector of the
subwoofer harness.
Subwoofer Installation
19. If the truck is equipped with the factory subwoofer option, run
the subwoofer harness through the incision that the factory sub-
woofer harness comes through. Tuck the factory wires under the
carpet out of the way.
20. If the truck was not equipped with the factory subwoofer option,
measure fi ve inches from the sill plate under the rear seat and make
an incision in the carpet where the subwoofer enclosure will reside
and pull the subwoofer harness through the incision. Fig. 7
21. Connect the subwoofer harness to the subwoofer enclosure
and apply the supplied foam strips over the connectors to prevent
them from vibrating against the enclosure.
21. If the truck was equipped with the factory subwoofer, use the
original bolts to secure the new subwoofer enclosure to the fl oor.
22. If the truck was not equipped with the factory subwoofer option,
nd the three mounting holes in the sheet metal. Cut a small hole in
the carpet above each hole and install the supplied nut inserts.
23. Secure the subwoofer with the supplied M6 bolts. Fig. 8
24. Install the fuse in the fuse holder.
25. Reinstall all previously remove parts in reverse order.
26. Reconnect negative battery cable. Torque to 7Nm.
Fig. 5
Fig. 6
5 inches
Fig. 7
Fig. 8

Produktspecifikationer

Varumärke: Kicker
Kategori: Subwoofer
Modell: SubStage SF150C09
Enhetsplacering: Vrijstaand
Typ av operation: Draaiknop
Färg på produkten: Wit
Dörrgångjärn: Rechts
Inbyggd display: Nee
Vikt: 21000 g
Bredd: 475 mm
Djup: 445 mm
Höjd: 850 mm
Nettoskatt: - W
Ljudnivå: 39 dB
Energie-efficiëntieklasse: E
Årlig-energiförbrukning: 85 kWu
Dörröppningsriktning utbytbar: Ja
Kylskåpets nettokapacitet: 88 l
Kylskåp med bruttokapacitet: 92 l
Kylskåp invändig belysning: Ja
Antal hyllor i kylskåp: 3
Antal-grönsakslådor: 1
Hyllmaterial: Glas
Kylskåpsdörrfickor: 2
Till fackområdet: Nee
Energianvändning per dag: 0.2 kWh/24u
Klimaatklasse: ST
Bulleremissionsklass: C
Justerbara fötter: Ja
Marknadspositionering: Tafelblad
Multi-luftvägssystem: Nee
Energieffektivitetsskala: A tot G

Behöver du hjälp?

Om du behöver hjälp med Kicker SubStage SF150C09 ställ en fråga nedan och andra användare kommer att svara dig




Subwoofer Kicker Manualer

Subwoofer Manualer

Nyaste Subwoofer Manualer