KLH Audio Albany Bruksanvisning

KLH Audio högtalare Albany

Läs nedan 📖 manual på svenska för KLH Audio Albany (4 sidor) i kategorin högtalare. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/4

BOOKSHELF

LOUDSPEAKERS

ALBANY AMES

MANUAL

WELCOME!

Thank you for purchasing one of the best sounding loudspeakers

ever produced. At KLH, we have been making high-quality com-

ponents since 1957, and we take pride in making your music and

movies the best experience possible.

FOR YOUR SAFETY

Important Safety Instructions!

1. READ these instructions.

2. KEEP these instructions.

3. HEED all warnings.

4. FOLLOW all instructions.

5. DO NOT use this apparatus near water.

6. CLEAN ONLY with dry cloth.

7. DO NOT block any ventilation openings. Install in accordance

with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat

registers, stoves, or other heat producing appliances

9. ONLY USE attachments/accessories specified by

the manufacturer.

10. DO NOT expose to excess moisture or liquids, and do not

place containers with liquids on top of speakers.

The exclamation point, within an equilateral triangle, is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the

literature accompanying the product.

The lightning flash with arrowhead symbol within an-

equilateral triangle, is intended to alert the user to the

presence of uninsulated “dangerous voltage” within the

product’s enclosure that may be of sufficient magnitude

to constitute a risk of electrical shock to persons.

EU COMP LIANCE INFORMAT ION:

Eligible to bear the CE mark, Conforms to European Union EMC

Directive 2004/108/EC; European Union Restriction of Hazard-

ous Substances Recast (RoHS2) Directive 2011/65/EC; European

Union WEEE Directive 2002/96/EC.

KLH and the KLH logo are registered trademarks of Kelley Global

Brands Inc., registered in the U.S. and other countries.

WEEE NOTICE

Note: This mark applies only to countries within the European

Union (EU) and Norway.

This appliance is labeled in accordance with European

Directive 2002/96/EC concerning waste electrical and

electronic equipment (WEEE). This label indicates that

this product should not be disposed of with household

waste. It should be deposited at an appropriate facility to

enable recovery and recycling.

UNPACKING

Place package on the floor or table top with the box flaps up.

Cut the tape with a utility knife to open the package. Fold the

carton flaps back and carefully slide the speaker and packaging

from the box, or turn the box over with flaps open and remove the

box. Stand the speaker and packing upright, making sure the speaker

is right side up, and remove the packing material.

C A U T I O N

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

WARNING: Do Not Open! Risk of Electrical Shock. Voltages in this

equipment are hazardous to life. No user-serviceable parts inside.

Refer all servicing to qualified service personnel.

ROOM POSITION

Placement of your monitor speakers is a personal preference, but

it is recommended that speakers be placed at least 6 feet apart

whether they are being used for a stereo application, or as the

main left and right channels for a home theater. For best imaging

and separation, listening distance from the speakers should be

about 1.5 times the distance the speakers are apart from

each other.

Example: If the distance between each speaker and the listening

position is 9 feet, then the speakers should be 6 feet apart from

one another.

Also be sure that speakers are placed at least 12 inches away from

any wall. Further adjustments can be made to optimize your

listening experience.

Monitor loudspeakers should be placed on stands or on book-

shelves, prefeably at ear level with listeners. These KLH monitors

may also be used as surround speakers if desired.

CONNECTING YOUR MONITORS

Both monitors have the same quality nickel-plated binding posts

(the Ames monitor has single posts only and cannot be bi-amped)

that will accomodate stripped wire, spade connectors or banana

plugs. Be sure to use quality speaker cables, up to 12 gauge (AWG).

The lowest gauge possible is recommended. Before using banana

plugs, be sure to remove the black and red inserts on the binding

posts. The straps connecting the binding posts should remain in

place for conventional wiring, but may be removed where bi-wir-

ing is preferred (Albany only). See the following diagrams in the

AMPLIFICATION section for further instruction.

AMPLIFICATION

Conventional amplification involves a single stereo amplifier

wired to a single set of binding posts with straps connecting the

second set of posts as seen in diagram above.

Simply attach the positive wire + to the red post, and the

negative wire – to the black post.

BI-AMPLIFICATION

This connection method (see diagram above) uses two separate

two channel amplifiers to power one set of speakers. One stereo

amplifier connects to one speaker, and the other identical amplifier

powers the second speaker. This is referred to as bi-amplification.

Be sure to remove the terminal straps before using the bi-ampli-

fication method. Connect positive + and negative – cables from

the amplifier to the top terminals, and make sure the connection

is tight. Connect the second set of cables (positive and negative)

to the bottom terminals and tighten. Repeat these same steps

using the second amplifier to connect to the second terminals.

LEFT

SUB

RIGHT

CENTER

SURROUND

LEFT

SURROUND

RIGHT

ALBANY

AMES

WARRANTY

Our 10-year parts warranty begins from purchase date of

the item (invoice date). For warranty/service issues, please

contact your place of purchase. Please keep your original

receipt. The warranty covers any production and material

defects of product. Warranty registration may be complet-

ed at klhaudio.com/warranty

The following is NOT COVERED by the warranty:

1. Accidents, misuse, poor maintenance, electrical overloads

such as lightning or voltage.

2. Repair must be performed by an authorized KLH dealer

or service center3. Incorrect installation of product.

4. Altered serial number.

5. Transportation costs for service call.

6. Purchase of KLH products from unauthorized reseller.

Replacement item cannot exceed the cost of the item

under warranty. The supplier is responsible for only repair

or replacement.

Produktspecifikationer

Varumärke:	KLH Audio
Kategori:	högtalare
Modell:	Albany

Behöver du hjälp?

Om du behöver hjälp med KLH Audio Albany ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

högtalare KLH Audio Manualer

KLH Audio Albany II Bruksanvisning

18 September 2024

KLH Audio Quincy Bruksanvisning

18 September 2024

KLH Audio Kendall 2C Bruksanvisning

18 September 2024

KLH Audio Concord Bruksanvisning

18 September 2024

KLH Audio Cambridge Bruksanvisning

18 September 2024

KLH Audio Kendall Bruksanvisning

18 September 2024

KLH Audio Kendall 2S Bruksanvisning

18 September 2024

KLH Audio Kendall 2F Bruksanvisning

18 September 2024

KLH Audio Beacon Bruksanvisning

18 September 2024

KLH Audio Model Three Bruksanvisning

18 September 2024

högtalare Manualer

Nyaste högtalare Manualer

Continental Edison CELED53HP20V2B4 Bruksanvisning

27 Oktober 2024

Canton Vento 830.2 Bruksanvisning

27 Oktober 2024

Jamo S7-25C Bruksanvisning

27 Oktober 2024

Bowers Wilkins 707 S2 Bruksanvisning

27 Oktober 2024

Monitor Audio Silver C150 Bruksanvisning

26 Oktober 2024

FBT MITUS 210M Bruksanvisning

26 Oktober 2024

CyberData Systems SIP 011398 Bruksanvisning

26 Oktober 2024

Lamax PartyGo1 Play Bruksanvisning

26 Oktober 2024

IKEA SYMFONISK 405.847.50 Bruksanvisning

26 Oktober 2024

IKEA SYMFONISK 804.923.34 Bruksanvisning

26 Oktober 2024