Klipsch KPH-525 Bruksanvisning

Läs nedan 📖 manual på svenska för Klipsch KPH-525 (8 sidor) i kategorin högtalare. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/8
KPH-525
OWNER’S MANUAL
The Klipsch KPH-525 Pendant Housing is designed specically to
hold the Klipsch IC-400-T or Klipsch IC-525-T 70/100 Volt in-ceiling
commercial loudspeaker. A pendant style speaker can be a perfect
distributed sound solution for a hospitality or retail environment
in areas where high ceilings or a lack of suspended ceilings make
in-ceiling speakers a challenge for direct, overhead sound coverage.
A pendant speaker can also provide a certain aesthetic solution when
blended with similar lighting styles. With their Tractrix® Horn-loaded
design, the use of either Klipsch IC Series speaker inside the housing
provides both higher efficiency for increased output with reduced
distortion for greater sound clarity and very even coverage patterns.
The KPH-525 combines with either Klipsch speaker for a quick,
uncomplicated install.
CONTENTS
KPH-525
One pendant housing One 9.5 ft (2.9M) drop cable with
three suspension cables with S-hooks
One fastlink wire joiner
1. Run speaker wire through housing top and out bottom and attach
to Klipsch IC speaker. See IC owner’s manual for 70 volt or 8 ohm
wiring directions.
3. Fasten by tightening the four Phillips screws indicated The speaker
frames “dog” legs will swivel out and secure the housing and
speaker together.
2. Insert the Klipsch IC speaker assembly with attached wiring into
the pendant housing bottom opening.
4. Attach the three s-hooks attached to the three suspension cables
to the three holes at the top of the pendant housing.
INSTALLATION

Produktspecifikationer

Varumärke: Klipsch
Kategori: högtalare
Modell: KPH-525

Behöver du hjälp?

Om du behöver hjälp med Klipsch KPH-525 ställ en fråga nedan och andra användare kommer att svara dig




högtalare Klipsch Manualer

högtalare Manualer

Nyaste högtalare Manualer