Kramer 4x1VB Bruksanvisning

Kramer Inte kategoriserad 4x1VB

Läs nedan 📖 manual på svenska för Kramer 4x1VB (1 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/1

4x1V, 4x1VB Quick Start

P/N:

2900- 301283QS

Rev:

Scan for full manual

4x1V, 4x1VB Quick Start Guide

This guide helps you install and use your 4x1V, 4x1VB for the first time.

Go to www.kramerav.com/downloads/4x1V to download the latest user manual and check if firmware

upgrades are available.

Step 1: Check in the bwhat’s ox

4x1V or 4x1VB 4:1 Video Switcher

1 Quick start guide

4 Rubber feet

1 User manual

Step 2: Mount 4x1V, 4x1VB

Install using one of the following methods: 4x1V, 4x1VB

• Attach the rubber feet and place the unit on a at surface.

• Fasten a bracket on each side of the unit and attach it to a at surface

(see

www.kramerav.com/downloads/4x1V).

• Mount the unit in a rack using the recommended rack adapter

(see www.kramerav.com/product/4x1V).

• Ensure that the environment (e.g., maximum ambient temperature &

air ow) is compatible for the device.

• Avoid uneven mechanical loading.

• Appropriate consideration of equipment nameplate ratings should be

used for avoiding overloading of the circuits.

• Reliable earthing of rack-mounted equipment should be maintained.

Step 3: Connect inputs and outputs

Always switch OFF the power on each device before connecting it to your .

4x1V, 4x1VB

The rear panel of the has RCA 4x1V

connectors (shown here).

The has BNC connectors. 4x1VB

To achieve specied extension distances, use the recommended Kramer cables available at www.kramerav.com/product/4x1V.

Using third-party cables may cause damage!

Step 4: Connect power

Connect the power cord to and plug it into the mains electricity.

4x1V, 4x1VB

Safety Instructions (See for updated safety information)www.kramerav.com

Caution:

• For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the terminal or in the User Manual.

• There are no operator serviceable parts inside the unit.

Warning:

• Use only the power cord that is supplied with the unit.

• Disconnect the power and unplug the unit from the wall before installing.

Step 5: Operate 4x1V, 4x1VB

Press one of the switcher input selector buttons to select the input that switches to the output.