La Crosse Technology 30902 Bruksanvisning

La Crosse Technology Klockradio 30902

Läs nedan 📖 manual på svenska för La Crosse Technology 30902 (2 sidor) i kategorin Klockradio. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

Page 3 Page 4Page | 2

0.9” 12 VOLT RED

LED ALARM CLOCK

Model: 30902

DC: 022421

PO W E R U P

1. Insert the 12V car plug into a 12V car outlet. Optional: Insert one

9 volt battery for backup.

2. 12:00 will flash as an indication to set the time and/or alarm.

TI M E S E T TI N G

1. Continuously hold down the TIME button while setting your hour

and minutes.

2. While holding the TIME button, press the HOUR button to set

your hour. Note: The PM indicator will appear when you advance

to PM time.

3. Press the MINUTE button to set your minutes.

4. Release the TIME button when the correct time is shown on the

display.

TI M E A L A R M

ON HI: Slide the ALARM HI/LO/OFF switch to the HI position to turn

the alarm on at the highest volume (90db). The alarm light indicator will

appear.

ON LO: Slide the ALARM HI/LO/OFF switch to the LO position to turn the

alarm on at a normal volume. The alarm light indicator will appear.

OFF: Slide the ALARM HI/LO/OFF switch to the OFF position to turn the

alarm OFF. The alarm light indicator will disappear.

A L A R M O N / O F F & V O LU M E

1. Continuously hold down the ALARM button while setting your alarm

time.

2. While holding the ALARM button, press the HOUR button to set your

alarm hour. Note: The PM indicator will appear when you advance to

PM time.

3. Press the MINUTE button to set your alarm minutes.

4. Release the ALARM button when the correct alarm time is shown on the

display.

S N O O Z E

• When alarm sounds, press the SNOOZE button to silence alarm for 8

minutes.

• Snooze function can be repeated many times if desired.

• Always purchase the correct size and grade of battery most suitable for

intended use.

• Clean the battery contacts and also those of your clock prior to battery

installation.

• Ensure the battery is installed with correct polarity (+ and -).

• Remove battery from equipment when it is not used for an extended

period of time.

• Promptly remove an expired battery.

C A R E & M A I N TE N A N C E

B AT T E R Y B AC K U P

• Insert one “9V” battery into the battery compartment on the back of the

clock. The battery will keep the alarm and time settings until the power

is restored.

• The LED display will not light-up but the alarm will sound at the preset

alarm time.

• If there is no battery installed but the power is interrupted, the display

will ﬂash at 12:00 and the time and alarm need to be set again.

Power: 12V power cord. Requires one 9V battery for back-up not included

Dimensions: 1.90”H x 4.55”W x 2.10”D

PO W E R R E Q U I R E M E N TS

HOUR Button

SNOOZE Button

ALARM HI/LO/OFF Switch

MINUTE Button TIME Button ALARM Button

12V CAR PLUG

Light

Indicator

Alarm

Light

Indicator

Time Display

Page 6Page 5 Page 7 Page 8

WARNING: This product can expose you to chemicals including

styrene, which is known to the State of California to cause cancer.

For more information go to: www.P65Warnings.ca.gov

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO

NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

Caution: To prevent electrical shock do not use this (polarized) plug with

an extension cord, receptacle, or other outlet unless the blades can be

fully inserted to prevent blade exposure.

ATTENTION: POUR PRÉVENIR LES CHOCS ÉLECTRIQUES NE PAS UTI-

LISER CETTE FICHE POLARISÉE AVEC UN

PROLONGATEUR, UNE PRISE DE COURANT, OU UNE AUTRE SORTIE

DE COURANT SAUF SI LES LAMES PEUVENT ETRE

INSÉRÉES À FOND SANS EN LAISSER AUCUNE PARTIE À

DÉCOUNVERT

S A F E T Y I N S T R U C T I O N S

1. Read Instructions - All the safety and operating instructions should be read before the

appliance is operated.

2. Retain Instructions - The safety and operating instructions should be retained for future

reference.

3. Water and Moisture - The appliance should not be used near water - for example, near

a bathub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimmimng

pool and the like.

4. Ventilation - The appliance should be situated so that its location or position does not

interfere with its proper ventilation. For Example, the appliance should not be situated on

a bed, sofa, rug or similar surface that may block the ventilation openings, or place in a

built-in installation such as a bookcase or cabinet that may impede the ﬂow of air through

the ventilation openings

5. Heat - The appliance should be situated away from heat sources such as radiators, heat

registers, stoves, or other appliances (including ampliﬁers) that produce heat.

6. Power Sources - The appliance should be connected to a power supply only of the type

described in the operating instructions or as marked on the appliance.

7. Grounding or Polarization - Precautions should be taken so that the grounding or

polarization means of an appliance is not defeated.

8. Power - Cord Protection - Power supply cords should be routed so that they are not likely

to be walked on, or pinched by items placed upon or against them, paying particular

attention to cords at plugs, convenience recepticles, and at the point where they exit from

the appliance.

9. Cleaning - The appliance should be cleaned only as recommended by the manufacturer.

10. Object and Liquid Entry - Care should be taken so that objects do not falland liquids are

not spilled into the enclusure through openings.

11. Damage Requiring Service - The appliance should be services by qualiﬁed service

personnel when:

A. The power supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the appliance; or

C. The appliance has been exposed to rain; or

D. The appliance does not appear to operate normally or exhibits a marked change in

performance; or

E. The appliance has been dropped, or the enclosure damaged.

12. Servicing - The user should not attempt to service the appliance beyond that described

in the operating instructions. All other servicing should be referred to qualiﬁed service

personnel.

Please help in the preservation of the envioronment and return used batteries to an authorized

depot. Remove the battery from the clock if you do not intend to use it for an extended period

of time.

Warning: Changes or modifications to this unit not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in

a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may

cause undesired operation.

CAUTION!

Any changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

duplicated or processed using electronic, mechanical or chemical process without the

written permission

of the publisher.

This booklet may contain errors or misprints. The information it contains is regularly

checked and corrections are included in subsequent editions. We disclaim any

responsibility for any technical error or printing error, or their consequences. All

trademarks and patents are recognized.

F C C S TATEM E N T

Equity provides a 2-year limited warranty on this product from the date of consumer

purchase against defects for material and workmanship. During this period such defects

will be repaired, or the product will be replaced at Equity’s option, without charge. This

warranty does not cover damage caused by misuse or negligence.

ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES

OR FITNESS AND MERCHANTABILITY, ARE LIMITED IN DURATION TO A PERIOD

ENDING TWO YEARS FROM DATE OF PURCHASE.

Some states do not allow limitations on how long an implied warranty lasts so the above

limitation may not apply to you. This warranty gives you speciﬁc legal rights and you may

also have other rights which vary from State to State.

If your product is not working properly, please send:

Your product. A letter explaining the problem and $5.00 for postage and handling to:

Equity by La Crosse

Warranty Department

2830 26th St S.

La Crosse, WI 54601

www.lacrossetechnology.com/support

WARR A N T Y & S U P P O R T

Made in China Printed in China

Produktspecifikationer

Varumärke:	La Crosse Technology
Kategori:	Klockradio
Modell:	30902
Färg på produkten:	Black, Wood colour
Vikt:	19600 g
Bredd:	210 mm
Djup:	310 mm
Höjd:	1060 mm
Förpackningens vikt:	23600 g
Förpackningens bredd:	460 mm
Djuppackning:	350 mm
Förpackningshöjd:	1170 mm
Blåtand:	Nee
Typ av förpackning:	Doos
Anslutningsteknik:	Bedraad
Genomsnittlig effekt:	150 W
Antal per paket:	2 stuk(s)
Rekommenderad användning:	Universeel
Impedans:	8 Ohm
Ljudutgångskanaler:	- kanalen
Högtalarplacering:	Vloer
Bashögtalare:	Ja
Peak Music Power Output (PMPO):	320 W
Frekvensomfång:	20 - 40000 Hz
Förstärkaranslutning (bindande post):	Ja
Typ av magnet:	Titanium
Basreflex:	Ja
Typ av högtalare:	3-weg
Högtalarhölje:	Gesloten
Förstärkare:	Nee
Diameter woofer:	192 mm
Antal basförare:	2
Diameter högtonenhögtalare:	25 mm
Antal diskantdrivrutiner:	1
Antal mellanklassförare:	1
Diameter förare i mellanregister:	174 mm
Tweeter:	Ja
Crossover frekvens:	3200 Hz