La Crosse Technology 512-807 Bruksanvisning

Läs nedan 📖 manual på svenska för La Crosse Technology 512-807 (14 sidor) i kategorin klocka. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/14
1
Manual
Introduction
The Wireless Weather Station with Digital Barometer oers radio-controlled time,
weather forecast, and indoor and outdoor temperature on one easy to read display.
ATOMIC WEATHER STATION:
Time WWVB Perpetual
Reception icon Calendar
Channel indicator
Transmitter low
battery indicator
Forecast icon
-hour pressure 12
history graph
Current pressure
Temperature
trend indicators
Outdoor temperature Indoor temperature
2
FEATURES:
Six digit time display
Atomic time and date with manual set option
Automatically updates for Daylight Saving Time (on/o option)
12-hour or 24-hour selectable time
Barometric pressure with 12-hour history graph.
Forecast icons: sunny, partly cloudy, cloudy, rainy and stormy.
Time Alarm
Perpetual calendar.
Indoor temperature (°F or °C)
Outdoor temperature (°F or °C)
Can read up to 3 outdoor sensors
Temperature trend indicators for indoor and outdoor temperature: up, steady, down.
Minimum and Maximum indoor and outdoor temperature
Wall hanging or free standing
Low battery indicator for receiver and transmitter
100 foot wireless transmission range (open air)
SET UP:
IMPORTANT: Do not mix old and new batteries.
Remove the screws and the battery cover from the back of the transmitter with a small
screwdriver. (see install batteries in transmitter).
Set the transmitter to Channel 1.
: if you have additional transmitters set them to channel 2 and channel 3 respectively. NOTE
Insert fresh alkaline batteries into the transmitter, observing the correct polarity (see marking
inside battery compartment). Keep the transmitter 5-10 feet from the weather station.
Select Fahrenheit or Celsius for the sensor display.
Within 30 seconds of powering up the transmitter, insert batteries into the Weather station,
observing the correct polarity Once the (see install batteries in the weather station).
batteries are in place, all segments of the LCD will light up briey. Following the indoor
temperature will be displayed. If the indoor temperature is not shown in the LCD after 60
seconds, remove the batteries and wait for at least 60 seconds before reinserting them.
3
Once the indoor data is displayed, proceed to the next step.
After the batterie are inserted, the Weather station will start receiving outdoor temp data s
from the transmitter.
: This can take up to 10 minutes. NOTE
The outdoor temperature should then be displayed on the Weather station. If this does not
happen after 10 minutes, remove the batteries from both units and start again from the
beginning.
In order to ensure sucient 434 MHz transmission, the outdoor transmitter should be placed
a distance of no more than 100 feet (30 meters, open air) from the Weather station.
INSTALL BATTERIES IN THE TRANSMITTER:
Remove the screws and the battery cover from the back of the transmitter with a small
screwdriver.
Select the channel to transmit the outdoor temperature.
: if using more than one transmitter, set each to a dierent channel to be displayed on NOTE
the weather station.
Insert two fresh AAA alkaline batteries into the transmitter, observing the correct polarity
(see marking inside battery compartment). Keep transmitter 5-10 feet from the weather
station.
Select Fahrenheit or Celsius for the sensor display.
Channel Selection
C/F Selection
Battery Cover
TX Button
Battery Compartment

Produktspecifikationer

Varumärke: La Crosse Technology
Kategori: klocka
Modell: 512-807

Behöver du hjälp?

Om du behöver hjälp med La Crosse Technology 512-807 ställ en fråga nedan och andra användare kommer att svara dig




klocka La Crosse Technology Manualer

klocka Manualer

Nyaste klocka Manualer