La Crosse Technology K86302 Bruksanvisning

La Crosse Technology klocka K86302

Läs nedan 📖 manual på svenska för La Crosse Technology K86302 (10 sidor) i kategorin klocka. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/10

INTRODUCTION:

The Digital Atomic Wall Clock features radio-controlled time, date, indoor and outdoor temperature on an easy to read

display. Receives signal from the Atomic Clock in Colorado, for accurate time.

DIGITAL ATOMIC WALL CLOCK

OUTDOOR TEMPERATURE TRANSMITTER TX14

Digital Atomic Wall Clock

with Indoor/Outdoor Temperature

Model: K86302 | Instruction Manual

TABLE OF CONTENTS:

INTRODUCTION 1

DIGITAL ATOMIC CLOCK 1

OUTDOOR TRANSMITTER TX14 1

TABLE OF CONTENTS 2

FEATURES 3

INTIAL SETUP 3

WWVB RADIO CONTROLLED TIME 3

WWVB RECEPTION ICON 3

MANUAL SEARCH 3

BUTTON FUNCTIONS 4

PROGRAM MENU 4

WWVB RECEPTION ON/OFF 4

TIME ZONE 4

DST INDICATOR 4

12/24-HOUR TIME FORMAT 5

TIME SET 5

CALENDAR SET 5

FAHRENHEIT/CELSIUS 5

ALARM SET 5

ALARM ACTIVATION 6

SNOOZE 6

TEMPERATURE TREND ICONS 6

LOW BATTERY INDICATI 6 OR

OUTDOOR TRANSMITTER RECEPTION ICON 6

INSTALL BATTERIES IN THE DIGITAL ATOMIC CLOCK 7

INSTALL BATTERIES IN THE OUTDOOR TRANSMITTER 7

POSITIONING THE ATOMIC CLOCK 7

POSTIONING THE OUTDOOR TRANSMITTER 7

CARE AND MAINTENANCE 8

SPECIFICATIONS 8

ACCURACY 9

WARRANTY 9

FCC DISCLAIMER 10

K86302

11” W x 1.1” D x 8.54” H (280 x 28 x 217 mm)

2-AA, IEC, LR6 batteries (not included)

TX14

2.5” L x 3.98” H x 1.42” W (64 x 101 x 36mm)

2-AA, IEC, LR6 batteries (not included)

FEATURES:

Wireless outdoor temperature (°F or °C) with trend arrow

Monitors indoor temperature (°F or °C) with trend arrow

Atomic time and date with manual setting

Automatically updates for Daylight Saving Time (on/o option)

Time display (hour / minute)

Perpetual calendar (month / date / weekday)

Seven Time zones:

o Atlantic Time (AST)

o Eastern Time (EST)

o Central Time (CST)

o Mountain Time (MST)

o Pacic Time (PST)

o Alaskan Time (AKT)

o Hawaiian Time (HAT)

Time alarm with snooze

Wall hanging or free standing

Low battery icon for clock and sens or

INITIAL SET UP:

1. Insert 2 AA batteries (not included) into the Digital Atomic Clock ( see Install Batteries in the Digital Atomic Clock).

The Digital Atomic Clock then shows time and indoor temperature.

2. Insert 2 fresh batteries into the transmitter, observing the correct polarity (AA see Install Batteries in the Outdoor

Transmitter).

Do Not Mix Old and New Batteries

Do Not Mix Alkaline, Standard, Lithium or Rechargeable Batteries

3. Keep the transmitter 5-10 feet from the Digital Atomic Clock for 15 minutes to establish a good connection.

4. Within 3 minutes the outdoor temperature should be displayed on the Digital Atomic Clock. If the outdoor temperature

is not displayed after 3 minutes remove batteries from the transmitter and the Digital Atomic Clock for 60 seconds and

start again from step 1.

5. For optimum 433 MHz transmission, the outdoor transmitter should be placed within 200 feet (60 meters, open air)

from the Digital Atomic Clock.

Note: The Digital Atomic Clock will start searching for the WWVB time signal for 2- minutes at start up. 10

WWVB RADIO CONTROLLED TIME

The NIST radio station, WWVB, is located in Ft. Collins, Colorado and transmits the exact time signal continuously

throughout the United States at 60 kHz. The signal can be received up to 2,000 miles away through the internal antenna

in the Digital Atomic Wall Clock. However, due to the nature of the Earth’s Ionosphere, reception is very limited during

daylight hours. The Digital Atomic Clock will search for a signal every night when reception is best. The WWVB radio

station derives its signal from the NIST Atomic Clock in Boulder, Colorado.

WWVB RECEPTION ICON with full signal strength will appear on screen if the reception of atomic time is

successful.

The tower icon will show solid when the Digital Atomic Clock has received the WWVB signal.

No tower icon displayed. The Digital Atomic Clock was unable to receive a signal at this time.

Reposition the Digital Atomic Clock for better signal reception or try again at bedtime.

The Digital Atomic Clock will start searching at UTC: 07:00 and if no reception on the rst attempt it will try

again at 08: , 09:00, 10:00, and 11:00. Each attempt will be at least 2 minutes and the most will be 10 minutes. 00

If there is no signal or too much interference the receiver will only be on for 2 minutes.

If the signal is good it may catch in ABOUT 2-3 minutes.

If the signal is marginal it will try to receive a signal for up to 10 minutes.

: Hold the -/TIME button to start a manual signal search. Manual Search

Note: In case the Digital Atomic Clock is not able to detect the WWVB signal (disturbances, transmitting distance, etc.);

the time can be manually set using the Program Menu.

Produktspecifikationer

Varumärke:	La Crosse Technology
Kategori:	klocka
Modell:	K86302
Färg på produkten:	Zwart
Vikt:	5650 g
Förpackningens vikt:	6645 g
Förpackningens bredd:	453 mm
Djuppackning:	575 mm
Förpackningshöjd:	130 mm
Nuvarande:	1 A
Typ av strömkälla:	AC
Antal USB 2.0-portar:	3
Antal Ethernet LAN (RJ-45)-portar:	2
Certifiering:	RoHS
Förvaringstemperatur:	-20 - 60 °C
Förvaringsfuktighet:	0 - 80 procent
Nettovikt kartong:	5650 g
Konsolport:	RJ-45/Mini-USB
Mått (B x D x H):	327.7 x 438.4 x 44 mm
Seriell port(ar):	32
(Ytter) huvudpaketets höjd:	130 mm
(Ytter) huvudförpackningens bredd:	453 mm
(Ytter) huvudförpackningens bruttovikt:	6645 g
(Ytre) huvudpaketets längd:	575 mm
Kvantitet per (yttre) huvudkartong:	1 stuk(s)
AC-ingångsspänning:	100 - 240 V
AC-ingångsfrekvens:	50 / 60 Hz
Drifttemperatur (TT):	0 - 40 °C
Relativ luftfuktighet i drift (VV):	0 - 80 procent