La Crosse Technology WS-8117U-IT-C Bruksanvisning
La Crosse Technology
klocka
WS-8117U-IT-C
Läs nedan 📖 manual på svenska för La Crosse Technology WS-8117U-IT-C (9 sidor) i kategorin klocka. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/9
1
INSTANT TRANSMISSION is the state-of-the-art
new wireless transmission technology,
exclusively designed and developed by LA
CROSSE TECHNOLOGY. INSTANT
TRANSMISSION offers you an immediate update
(every 4 seconds!) of all your outdoor data
measured from the transmitters: follow your
climatic variations in real-time!
WS-8117U-IT
ATOMIC CLOCK WITH OUTDOOR WIRELESS TEMPERATURE
AND MOON PHASE
Instruction Manual
FEATURES:
ATOMIC CLOCK:
LCD2
display
Battery cover
Function keys
LCD1
display
Hanging holes
Foldable stand
This product offers:
2
Holder
• WWVB Radio controlled time with manual time setting
• 12/24 hour time display
• Time display: hour, minute, second
• Alarm setting with snooze function
• Calendar display
• Weekday display (4 languages to choose from: English, French, Spanish, and German)
• Time zone setting
• Daylight savings time ON/OFF option (DST)
• ºC or ºF temperature display selectable
• Indoor temperature display
• Outdoor temperature display via 915MHz transmission
• Wall mount or freestanding
• Current moon phase display
OUTDOOR TEMPERATURE SENSOR:
• Remote transmission of outdoor temperature to the
atomic clock by 915 MHz signals
• Wall mounting case
TO INSTALL AND REPLACE BATTERIES IN THE ATOMIC CLOCK
The atomic clock uses 2 x AA, 1.5V batteries. To install and replace the batteries, please follow
the steps below:
1. Insert finger or other solid object in the space at the bottom center of the battery
compartment and lift up to remove the cover.
2. Insert batteries observing the correct polarity (see marking inside battery compartment).
3. Replace compartment cover.
DO NOT SET THE CLOCK.
3
TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE SENSOR
The sensor uses 2 x AA,1.5V batteries. To install and replace the batteries, please follow the
steps below:
1. Remove the cover.
2. Insert the batteries, observing the correct polarity (see marking inside battery compartment).
3. Replace the battery cover on the unit.
Alkaline batteries are recommended for use in both units. Avoid using rechargeable
batteries.
SETTING UP:
Alkaline batteries are recommended for use in both units. Avoid using
rechargeable batteries.
NOTE: Do not set the clock until the outdoor temperature is displayed.
1. Place batteries in the outdoor sensor first, then into the atomic clock. DO NOT PRESS
ANY BUTTONS FOR 10 MINUTES.
2. Once the batteries are in place, all segments of the LCD will light up briefly. Following the
indoor temperature, date, weekday, and the time as 12:00 will be displayed. If they are not
shown in LCD after 60 seconds, remove the batteries and wait for at least 60 seconds
before reinserting them. Once the indoor data is displayed user may proceed to the next
step.
3. After the batteries are inserted, the atomic clock will start receiving data signal from the
sensor. The outdoor temperature should then be displayed on the atomic clock. If this does
not happen after 2 minutes, the batteries will need to be removed from both units and reset
from step 1 and the signal reception icon is no longer shown.
Note:
In the event of changing batteries of the unit ensure that the batteries do not spring free from the
contacts. Always wait at least 10 minutes after removing the batteries before reinserting,
otherwise start up and transmission problems may occur.
FUNCTION KEYS
The atomic clock has four easy to use keys:
SET key : To enter into the set mode for the following functions: time zone, DST ON/OFF
(daylight saving time), language, hour, minute, year, month, day, weekday,
12/24 hour, ºC or ºF temperature display
4
Weekday
Indoor temperature
+ key : To toggle between the second, temperature or weekday display
To change any values in manual set mode
ALM key : To enter into the alarm set mode
To display the alarm time in normal mode display
To set the alarm ON/OFF
SNZ key : To activate the snooze function during alarm
To exit the setting modes
ATOMIC CLOCK LCD SCREEN DESCRIPTIONS
The atomic clock's LCD is divided into 2 sections and once the batteries are inserted, all the
segments will light up briefly before displaying the information for time, date, indoor and outdoor
temperatures.
MANUAL SETTINGS
Note:
If the atomic clock has already successfully received the WWVB time signal and displays
the correct time and date, then the Manual settings can be skipped.
After completion of the above described procedures in “Setting up” the manual setting modes
can be entered by pressing and holding the SET key for 3 seconds. The following settings can
now be programmed:
• Time zone setting
• DST ON/OFF
• Language display setting
• Manual time setting
Date
Outdoor temperature display
WWVB time
Radio rece
p
tion icon
Alarm icon
Low battery indicator (atomic clock)
Low battery indicator (sensor)
5
• Year setting
• Month setting
• Date setting
• Weekday setting
• 12/24 hour time display setting
• ºC or ºF setting
TIME ZONE SETTING
After entering the manual setting mode as described above, the time zone can be set between the
+12 to –12 hour or Greenwich Mean Time (GMT) range in LCD2. To do this:
1. The time zone (LCD2) will start flashing (Default setting "-5h“). Select the desired time zone
by pressing and releasing the + key.
Note: The time zones from –4 to –10 hours will be displayed with 3 characters abbreviations:
• -4 ATL (Atlantic time),
• -5 EST (Eastern time; default time zone),
• -6 CST (Central time),
• -7 MST (Mountain time),
• -8 PST (Pacific time),
• -9 ALA (Alaska time),
• -10 HAW (Hawaii time).
• "GMT” will be displayed if set to GMT (0).
2. Press and release the SET key to enter the “DST Setting“.
DST SETTING (daylight saving time)
1. The ON digit will start flashing on LCD1. Set the DST ON or OFF by pressing the + key.
2. Press and release the SET key to enter the “Language Setting“.
Note:
The DST default is “ON”, meaning that the WWVB will automatically change the time according to
Daylight Saving Time in the spring and fall. For areas that do not recognize DST changes
(Arizona and parts of Indiana) turn the DST “OFF”.
6
LANGUAGE SETTING
The weekdays can be displayed in LCD1 with the pre-set languages: US English, French, Spanish
and German (US, F, E, d).
1. Set the desired language for the weekday display in LCD1 by use of the + key.
2. Press and release the SET key to enter the mode “Manual Time Setting”.
MANUAL TIME SETTING
In case the atomic clock is not able to detect the WWVB-signal (disturbances, transmitting
distance, etc.), the time can be manually set. The clock will then work as a normal Quartz clock.
Note: In 12 hours mode the time will be displayed with an additional “ ”PM for the time from 12:00
noon until 11:59.
1. The hour digits will start flashing on LCD1.
2. Set the desired hours by pressing and releasing the + key followed by pressing the SET key.
3. Now the minute digits will start flashing.
4. Set the desired minutes by pressing and releasing the + key . If the + key is held, the units
will increase by 5.
5. Press and release the SET key to move to the “Year Setting”.
Note:
The unit will still try and receive the signal every day despite it being manually set. When it does
receive the signal, it will change the manually set time into the received time. During reception
attempts the WWVB tower icon will flash. If reception has been unsuccessful, then the WWVB
tower icon will not appear but reception will still be attempted the next hour.
WWVB reception occurs daily at 12:00 am and 06:00 am. If the reception is not successful at
12:00 am, then the next reception takes place the next hour and so on until 06:00am, or until the
reception is successful. If the reception is not successful at 06:00 am, then the next attempt will
take place the next day at 12:00 am.
The other times WWVB reception takes place are upon setup and after manual time set exiting
mode. Reception is generally not possible during daylight hours due to the interference of the sun.
YEAR SETTING
The year can be selected sequentially from 2001 to 2029 and will then start over again (default
setting 2006). Only the last 2 digits of the year will be visible on LCD2.
1. The year digits will start flashing on LCD2. Select the desired year by use of the + key.
2. Press and release the SET key to switch to the “Month Setting”.
Produktspecifikationer
| Varumärke: | La Crosse Technology |
| Kategori: | klocka |
| Modell: | WS-8117U-IT-C |
Behöver du hjälp?
Om du behöver hjälp med La Crosse Technology WS-8117U-IT-C ställ en fråga nedan och andra användare kommer att svara dig
klocka La Crosse Technology Manualer
6 December 2024
6 December 2024
6 December 2024
6 December 2024
6 December 2024
6 December 2024
26 Oktober 2024
3 Oktober 2024
3 Oktober 2024
2 Oktober 2024
klocka Manualer
- klocka Casio
- klocka IKEA
- klocka Braun
- klocka Fysic
- klocka Ade
- klocka Alecto
- klocka Amplicom
- klocka Ascot
- klocka Invicta
- klocka Ecom
- klocka Nedis
- klocka Taylor
- klocka Livoo
- klocka RCA
- klocka United Office
- klocka Karlsson
- klocka Elro
- klocka Hama
- klocka Cresta
- klocka GlobalTronics
- klocka Marquant
- klocka AcuRite
- klocka Muse
- klocka Auriol
- klocka Ventus
- klocka Fisher Price
- klocka Technoline
- klocka AV:link
- klocka Audiovox
- klocka Davis
- klocka McIntosh
- klocka Balance Time
- klocka Valcom
- klocka Hager
- klocka Chacon
- klocka TFA
- klocka Zuiver
- klocka Irox
- klocka Trevi
- klocka Gira
- klocka Krontaler
- klocka Balance
- klocka Dexford
- klocka Ranex
- klocka Geemarc
- klocka IHome
- klocka Dormakaba
- klocka BBrain
- klocka Eurochron
- klocka La Crosse
- klocka Sempre
- klocka Digi-tech
- klocka Global Tronics
- klocka Oregon Scientific
- klocka TFA Dostmann
- klocka Antelope Audio
- klocka Equity
- klocka Mebus
- klocka Focus Electrics
- klocka Techno Line
- klocka Gingko
- klocka Weinberger
- klocka CyberData Systems
- klocka Electronics International
- klocka Antelope
- klocka Bearware
Nyaste klocka Manualer
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
8 December 2024
8 December 2024
8 December 2024
8 December 2024
8 December 2024