La Crosse Technology WS-8248 Bruksanvisning

La Crosse Technology klocka WS-8248

Läs nedan 📖 manual på svenska för La Crosse Technology WS-8248 (12 sidor) i kategorin klocka. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/12

WS-8248

ATOMIC CLOCK WITH INDOOR TEMP/HUMIDITY AND OUTDOOR

TEMPERATURE

Instruction Manual

FEATURES:

ATOMIC CLOCK:

• WWVB Radio controlled time with manual time setting

• Time display: hour, minute, second

• Alarm setting with snooze function

• Complete calendar display

• Weekday display (3 languages to choose from: English, French and Spanish)

• Time zone setting

• Daylight savings time ON/OFF option (DST)

• Indoor temperature and humidity display

• Outdoor temperature display via 433MHz transmission

• Wall mount or freestanding

• Current moon phase display

OUTDOOR TEMPERATURE TRANSMITTER:

Mounting Bracket

• Remote transmission of outdoor temperature to the atomic clock by 433 MHz signals

• Wall mounting case

TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE TRANSMITTER

The transmitter uses 2 x AA,1.5V batteries. To install and replace the batteries, please follow the

steps below:

1. Remove the cover.

2. Insert the batteries, observing the correct polarity (see marking inside battery compartment).

3. Replace the battery cover on the unit.

Alkaline batteries are recommended for use in both units. Avoid using rechargable batteries.

TO INSTALL AND REPLACE BATTERIES IN THE ATOMIC CLOCK

The atomic clock uses 3 x AA, 1.5V batteries. To install and replace the batteries, please follow the

steps below:

1. Pull down on the tab at the top of the battery cover and lift up to remove the cover.

2. Insert batteries observing the correct polarity (see marking inside battery compartment).

3. Replace compartment cover.

DO NOT SET THE CLOCK.

SETTING UP:

LCD2

display

LCD1

display

Hanging holes

Function keys

Foldable stands

Battery cover

Alkaline batteries are recommended for use in both units. Avoid using rechargable

batteries.

NOTE: Do not set the clock until the outdoor temperature is displayed.

1. Place batteries in the outdoor transmitter first, then into the atomic clock. DO NOT

PRESS ANY BUTTONS FOR 15 MINUTES.

2. After 15 minutes both the Indoor and Outdoor areas on your clock should have a temperature

showing. If not, remove both sets of batteries, wait 15 minutes and repeat step one.

3. After the clock receives the outdoor temperature the WWVB time code reception will

automatically start. This reception typically takes between 5-10 minutes in good conditions. If

after 15 minutes the WWVB time has not been received, use the “SET” key to manually enter

the set-up mode and change either the time or date in order to activate the WWVB reception

(see manual settings below). The clock will then automatically attempt to receive the WWVB

time from 12:00 am through 6:00 am each day (attempts WWVB reception every full hour within

this time frame). When this is successful, the received time will override the manually set time.

The date is also updated with the received time (Please refer to notes on “Radio controlled

time” and “Manual time setting”).

4. After the time signal has been received or the search mode has been manually stopped the

indoor temperature will be displayed.

Note:

When changing batteries in either of the units, ensure that the batteries do not spring free from the

contacts. Always wait at least 15 minutes after removing the batteries before reinserting, otherwise

start up and transmission problems may occur.

FUNCTION KEYS

The atomic clock has four easy to use keys:

SET key : To enter into the set mode for the following functions: LCD contrast, time zone, DST

ON/OFF (daylight saving time), radio-controlled time ON/OFF, language, hour,

minute, year, month and date.

+ key : To toggle between the seconds display options

To change any values in manual set mode

ALM key : To enter into the alarm set mode

To set the alarm ON/OFF

To display the alarm time in normal mode display

To exit the setting modes

SNZE key : To activate the snooze function during alarm

ATOMIC CLOCK LCD SCREEN DESCRIPTIONS

The atomic clock's LCD is divided into 2 sections and once the batteries are inserted, all the

segments will light up briefly before displaying the information for time, date, indoor and outdoor

temperatures and indoor humidity.

MANUAL SETTINGS

Note:

WWVB time

Indoor humidity and

temperature

Radio reception icon

Outdoor temperature

Weekday

Date

larm icon

Month

Moon Phase

If the atomic clock has already successfully received the WWVB time signal and displays the

correct time and date, then the Manual settings can be skipped.

After completion of the above described procedures in “Setting up” the manual setting modes can

be entered by pressing and holding the SET key for 5 seconds. The following settings can now be

programmed:

Default (Factory) Setting

• LCD contrast setting 4

• Time zone setting -5 (Eastern Standard Time)

• DST ON/OFF ON

• Radio-controlled time ON/OFF ON

• Language display setting ENG (English)

• Manual time setting (Hour then Minute) 12 (hour), 00 (minute)

• Year setting 2004

• Month setting Jan (January)

• Date setting 1

LCD CONTRAST SETTING

After entering the manual setting mode as described above, the LCD contrast can be set between 0

and 7.

1. Press and hold the SET key for 5 seconds.

2. LCD will be displayed in the lower display and a number will flash to the right of the word LCD.

3. Press and release the + key to select the desired LCD contrast.

4. Press and release the ket to confirm the LCD contraSET st and continue to the Time Zone

setting.

TIME ZONE SETTING

The time zone can be set between the –1 to –12 hour or Greenwich Mean Time (GMT) range.

1. The time zone will start flashing (Default setting "-5h“) in the lower LCD display.

2. Press and release the + key to select the desired time zone.

3. Press and release the SET key to confirm the time zone setting and continue to the DST

(Daylight Saving Time) setting.

Note: The time zones from –4 to –10 hours will be displayed with 3 characters abbreviations:

• -4 ATL (Atlantic time),

• -5 EST (Eastern time; default time zone),

• -6 CST (Central time),

• -7 MST (Mountain time),

• -8 PST (Pacific time),

• -9 ALA (Alaska time),

• -10 HAW (Hawaii time).

• "GMT” will be displayed if set to GMT (0).

DST SETTING (daylight saving time)

1. The word ON will start flashing in the lower LCD display.

Produktspecifikationer

Varumärke:	La Crosse Technology
Kategori:	klocka
Modell:	WS-8248
Typ av operation:	Knoppen
Färg på produkten:	Zwart
Bredd:	775 mm
Djup:	265 mm
Höjd:	640 mm
Plugg typ:	Type F
Sladdlängd:	1.5 m
Användarmanual:	Ja
Husmaterial:	Kunststof
Antal hastigheter:	2
Tillgångar:	2000 W
Internationell säkerhetskod (IP):	IP00
LED-indikatorer:	Stroom
Lämplig för rum upp till:	25 m²
Justerbar i höjdled:	Nee
Indikator ljus:	Ja
Vattentät:	Nee
Lämplig för:	Binnen
Justerbar termostat:	Ja
Snabb värme:	Ja
Antal per paket:	1 stuk(s)
Lätt att installera:	Ja
Bärbar:	Ja
AC-ingångsspänning:	240 V
AC-ingångsfrekvens:	50 - 60 Hz
Hjulhjul:	Ja
Lämplig för rumsvolymer upp till:	70 m³
Värmekraft:	2000 W
Placeringsalternativ:	Vloer
Värmeeffekt (min):	1000 W
Anti-lutningsskydd:	Ja