La Crosse Technology WS-8318U-IT Bruksanvisning

La Crosse Technology klocka WS-8318U-IT

Läs nedan 📖 manual på svenska för La Crosse Technology WS-8318U-IT (3 sidor) i kategorin klocka. Denna guide var användbar för 11 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/3

LCD2

display

Battery cover

LCD1

display

Hanging holes

Foldable stand

INSTANT TRANSMISSION is the state-of-the-art

new wireless transmission technology,

exclusively designed and developed by LA

CROSSE TECHNOLOGY. INSTANT

TRANSMISSION offers you an immediate update

(every 4 seconds!) of all your outdoor data

measured from the transmitters: follow your

climatic variations in real-time!

WS-8318U-IT

ATOMIC CLOCK WITH OUTDOOR WIRELESS TEMPERATURE

AND MOON PHASE

Instruction Manual

FEATURES:

ATOMIC CLOCK:

• WWVB Radio controlled time with manual time setting

• 12/24 hour time display

• Time display: hour, minute, second optional

Function keys

This product offers:

Holder

• Alarm setting with snooze function

• Calendar display

• Weekday display (4 languages to choose from: English, French, Spanish, and German)

• Time zone setting

• Daylight savings time ON/OFF option (DST)

• ºF or ºC temperature display selectable

• Indoor temperature display

• Outdoor temperature display via 915MHz transmission

• Wall mount or freestanding

• Current moon phase display

OUTDOOR TEMPERATURE SENSOR:

• Remote transmission of outdoor temperature to the

atomic clock by 915 MHz signals

• Wall mounting case

TO INSTALL AND REPLACE BATTERIES IN THE ATOMIC CLOCK

The atomic clock uses 2 x AA, 1.5V batteries. To

install and replace the batteries, please follow the

steps below:

1. Insert finger or other solid object in the space at

the bottom center of the battery compartment

and lift up to remove the cover.

2. Insert batteries observing the correct polarity

(see marking inside battery compartment).

3. Replace compartment cover.

DO NOT SET THE CLOCK.

TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE SENSOR

The sensor uses 2 x AA,1.5V batteries. To install and replace the

batteries, please follow the steps below:

1. Remove the cover.

2. Insert the batteries, observing the correct polarity (see marking

inside battery compartment).

3. Replace the battery cover on the unit.

Alkaline batteries are recommended for use in both units. Avoid

using rechargeable batteries.

SETTING UP:

Alkaline batteries are recommended for use in both units. Avoid using

rechargeable batteries.

NOTE: Do not set the clock until the outdoor temperature is displayed.

1. Place batteries in the outdoor sensor first, then into the atomic clock. DO NOT

PRESS ANY BUTTONS FOR 10 MINUTES.

1. Once the batteries are in place, all segments of the LCD will light up briefly. Following

the indoor temperature, date, weekday, and the time, as 12:00, will be displayed. If they

are not shown in LCD after 60 seconds, remove the batteries and wait for at least 60

seconds before reinserting them. Once the indoor data is displayed user may proceed to

the next step.

3. After the batteries are inserted, the atomic clock will start receiving data signal from the

sensor. The outdoor temperature should then be displayed on the atomic clock. If this

does not happen after 2 minutes, the batteries will need to be removed from both units

and reset from step 1 and the signal reception icon is no longer shown.

Note:

In the event of changing batteries of the unit ensure that the batteries do not spring free from

the contacts. Always wait at least 10 minutes after removing the batteries before reinserting,

otherwise start up and transmission problems may occur.

FUNCTION KEYS

The atomic clock has four easy to use keys:

SET key : To enter into the set mode for the following functions: time zone, DST

ON/OFF (daylight saving time), language, hour, minute, year, month, day,

weekday, 12/24 hour, ºC or ºF temperature display

+ key : To toggle between the second, temperature or weekday display

To change any values in manual set mode

To change values in alarm set mode

ALM key : To enter into the alarm set mode

To display the alarm time in normal mode display

To set the alarm ON/OFF

SNZ key : To activate the snooze function during alarm

To exit the setting modes

ATOMIC CLOCK LCD SCREEN DESCRIPTIONS

The atomic clock's LCD is divided into 2 sections and once the batteries are inserted, all the

segments will light up briefly before displaying the information for time, date, indoor and

outdoor temperatures.

Date

Outdoor temperature display

WWVB time

Radio rece

tion icon

Alarm icon

Weekday

Indoor temperature

Low battery indicator (atomic clock)

Low battery indicator (sensor)

Moon phases display

MANUAL SETTINGS

Note:

If the atomic clock has already successfully received the WWVB time signal and

displays the correct time and date, then the Manual settings can be skipped.

After completion of the above described procedures in “Setting up” the manual setting modes

can be entered by pressing and holding the SET key for 3 seconds. The following settings can

now be programmed:

• Time zone setting

• DST ON/OFF

• Language display setting

• Manual time setting

• Year setting

• Month setting

• Date setting

• Weekday setting

• 12/24 hour time display setting

• ºF or ºC setting

TIME ZONE SETTING

After entering the manual setting mode as described above, the time zone can be set between

the +12 to –12 hour or Greenwich Mean Time (GMT) range in LCD2. To do this:

1. The time zone (LCD2) will start flashing (Default setting "-5h“). Select the desired time

zone by pressing and releasing the + key.

Note: North American Time Zones are negative numbers.The time zones from –4 to –10

hours will be displayed with 3 characters abbreviations:

• -4 ATL (Atlantic time),

• -5 EST (Eastern time; default time zone),

• -6 CST (Central time),

• -7 MST (Mountain time),

• -8 PST (Pacific time),

• -9 ALA (Alaska time),

• -10 HAW (Hawaii time).

• "GMT” will be displayed if set to GMT (0).

2. Press and release the SET key to enter the “DST Setting“.

DST SETTING (daylight saving time)

1. The ON digit will start flashing on LCD1. Set the DST ON or OFF by pressing the + key.

2. Press and release the SET key to enter the “Language Setting“.

Note:

The DST default is “ON”, meaning that the WWVB will automatically change the time

according to Daylight Saving Time in the spring and fall. For areas that do not recognize DST

changes (Arizona and parts of Indiana) turn the DST “OFF”.

LANGUAGE SETTING

The weekdays can be displayed in LCD1 with the pre-set languages: US English, French,

Spanish and German (US, F, E, d).

1. Set the desired language for the weekday display in LCD1 by use of the + key.

2. Press and release the SET key to enter the mode “Manual Time Setting”.

MANUAL TIME SETTING

In case the atomic clock is not able to detect the WWVB-signal (disturbances, transmitting

distance, etc.), the time can be manually set. The clock will then work as a normal Quartz

clock.

Note: In 12 hours mode the time will be displayed with an additional “ ”PM for the time from

12:00 noon until 11:59.

1. The hour digits will start flashing on LCD1.

2. Set the desired hours by pressing and releasing the + key followed by pressing the SET

key.

3. Now the minute digits will start flashing.

4. Set the desired minutes by pressing and releasing the + key . If the + key is held, the

units will increase by 5.

5. Press and release the SET key to move to the “Year Setting”.

Note:

The unit will still try and receive the signal every day despite it being manually set. When it

does receive the signal, it will change the manually set time into the received time. During

reception attempts the WWVB tower icon will flash. If reception has been unsuccessful, then

the WWVB tower icon will not appear but reception will still be attempted the next hour.

WWVB reception occurs daily at 12:00 am and 06:00 am. If the reception is not successful at

12:00 am, then the next reception takes place the next hour and so on until 06:00am, or until

the reception is successful. If the reception is not successful at 06:00 am, then the next

attempt will take place the next day at 12:00 am.

The other times WWVB reception takes place are upon setup and after manual time set

exiting mode. Reception is generally not possible during daylight hours due to the interference

of the sun.

YEAR SETTING

The year can be selected sequentially from 2001 to 2029 and will then start over again

(default setting 2006). Only the last 2 digits of the year will be visible on LCD2.

1. The year digits will start flashing on LCD2. Select the desired year by use of the + key.

2. Press and release the SET key to switch to the “Month Setting”.

MONTH SETTING

1. The month digits on LCD2 will start flashing. Set the desired month by use of the + key.

2. Press and release the SET key to move to the mode “Date Setting”.

DATE SETTING

1. The digits for the date will start flashing on LCD2 (Default setting 1). Set the desired

date by use of the + key.

Note: The date can only be set in conjunction with the selected month. For example, it is

not possible to set the date 30 if the month of February is selected.

2. Press and release the SET key to enter the “Weekday Setting”.

WEEKDAY SETTING

1. The weekday symbols will be displayed on LCD2 in the pre-set language and flashing.

Set the desired weekday by use of the + key.

2. Press and release the SET key to enter the mode “12/24 Hours Time Display

Setting”.

12/24 HOURS TIME DISPLAY SETTING

1. The “12h” or “24h” will start flashing in LCD1 (Default setting 12h). Select the desired

time display mode by use of the + key.

2. Press and release the SET key to enter the “ºF/ºC Temperature Setting“.

°F OR °C TEMPERATURE SETTING

1. The characters “°F” “°C” or will start flashing on LCD1 (Default setting °F). By use of

the + key select “°C” for temperature display in degrees Celsius or “°F” for degrees

Fahrenheit.

2. Press and release the SET key to exit the setting mode and switch back to the normal

display mode.

EXIT THE MANUAL SETTING MODES

• To return to the normal display mode from anywhere in manual setting mode simply

press the SNZ key anytime.

• If no keys are pressed for at least 15 seconds in setting mode, the atomic clock will

automatically switch back to normal display mode.

ALARM SETTING

To enter into the alarm setting mode:

1. Hold the ALM key for 4 seconds. The hour digits start flashing.

2. Press and release the + key to set the hour.

3. Press and release the ALM key to set the minutes. The minute digits start flashing.

4. Press and release the + key to set the minutes.

5. Press and release again the ALM key to exit the Alarm setting mode or wait for 15

seconds automatic timeout.

TO DEACTIVATE THE ALARM:

The alarm will be automatically ON when the alarm time is set. To deactivate the alarm

(OFF), press and release once the ALM key in normal mode display. The alarm icon will

disappear, the alarm is now off.

Alarm icon

(((•))) (ON)

SNOOZE SETTING

The snooze can only be activated during alarm time for a snooze duration of 10 minutes by

pressing the SNZ key on the back of the clock

OUTDOOR TEMPERATURE SENSOR:

The temperature is measured and transmitted to the atomic clock every 4 seconds. The

atomic clock will update the outdoor temperature display every 4 seconds.

The range of the outdoor temperature sensor may be affected by the temperature. At cold

temperatures the transmitting distance may be decreased. Please bear this in mind when

positioning the sensor. Also the batteries may be reduced in power during periods of extreme

cold temperatures.

915MHz RECEPTION CHECK FOR OUTDOOR TEMPERATURE SENSOR

The atomic clock will receive the temperature data within 3 minutes. If the temperature data is

not being received 3 minutes after setting up (the display shows “- - -”), then please check the

following points:

1. The distance of the atomic clock or outdoor temperature sensor should be at least 6 feet

(2 meters) away from any interfering sources such as computer monitors or TV sets.

2. Avoid placing the receiver onto or in the immediate proximity of metal window frames.

3. Using other electrical products such as headphones or speakers operating on the same

signal frequency (915MHz) may prevent correct signal transmission and reception.

4. Neighbors using electrical devices operating on the 915MHz signal frequency can also

cause interference.

Note:

When the 915 MHz signal is received correctly, do not re-open the battery cover of either the

outdoor temperature sensor or atomic clock, as the batteries may spring free from the

contacts and force a false reset. Should this happen accidentally then reset all units (see

Setting up above) otherwise transmission problems may occur.

The maximum transmission range is 330 feet (100 meters) from the outdoor temperature

sensor to the atomic clock (in open space). However, this depends on the surrounding

environment and interference levels. If no reception is possible despite the observation of

these factors, all system units have to be reset (see Setting up).

CHANGING THE DISPLAY MODE (DAY, SECONDS, AND TEMPERATURES)

There are 4 possible display modes to view the day, seconds, and temperatures.

The month&date/weekday/indoor temperature/outdoor temperature is the default.

To change the display:

1. Press the + key. The display should now show the

month&date/weekday/seconds/outdoor temperature.

2. Press the + key a second time and the display will show the

month&date/weekday/indoor temperature/seconds.

3. Press the + key a third time and the display will show the month&date/seconds/indoor

temperature/outdoor temperature.

4. Press the + key a fourth time and the display will return to the normal display.

WWVB RADIO CONTROLLED TIME

The NIST radio station, WWVB, is located in Ft. Collins, Colorado and transmits the exact time

signal continuously throughout the United States at 60 kHz. The signal can be received up to

2,000 miles away through the internal antenna in the atomic clock. However, due to the nature

of the Earth’s Ionosphere, reception is very limited during daylight hours. The atomic clock will

search for a signal every night when reception is best. The WWVB radio station derives its

signal from the NIST atomic clock in Boulder, Colorado. A team of atomic physicists

continually measures every second of every day to an accuracy of ten billionths of a second a

day. These physicists have created an international standard, measuring a second as

9,192,631,770 vibrations of a Cesium 133 atom in a vacuum. This atomic clock regulates the

WWVB transmitter.

Once the outdoor temperature is displayed on the atomic clock, the WWVB tower icon in the

clock display will start flashing in the top center of the LCD. This indicates that the clock has

detected a radio signal and is trying to receive it. When the time code is received, the WWVB

tower becomes permanently lit and the time will be displayed.

If the tower icon flashes, but does not set the time or the WWVB tower does not appear at all,

then please take note of the following:

• Recommended distance to any interfering sources like computer monitors or TV sets is

a minimum of 6 feet (2 meters).

• Within ferro-concrete rooms (basements, superstructures), the received signal is

naturally weakened. In extreme cases, please place the unit close to a window and/ or

point its front or back towards the Fort Collins, Colorado, transmitter.

• During nighttime, the atmospheric disturbances are usually less severe and reception is

possible in most cases. A single daily reception is adequate to keep the accuracy

deviation below 1 second.

Note:

In case the atomic clock is not able to detect the WWVB-signal (disturbances, transmitting

distance, etc.), the time can be manually set (please refer to notes on Manual time setting).

MOON PHASE

The Moon Phases, and their corresponding dates appear in LCD 2. There are 12 visible

Moon Phases that will show in the LCD 2:

New Moon Small Waxing Large Waxing First Quarter Small Waxing Large Waxing

Crescent Crescent Gibbous Gibbous

FullMoon Large Waning Small Waning Last Quarter Large Waning Small Waning

Gibbous Gibbous Crescent Crescent

POSITIONING

Before permanently mounting ensure that the atomic clock is able to receive WWVB signals

from the desired location. Also, extreme and sudden changes in temperature will decrease the

accuracy of the atomic clock, and changes in elevation will result with inaccurate temperatures

readings for the next 12 to 24 hours. These changes will require a 12 to 24 hour wait before

obtaining reliable data.

To achieve a true temperature reading, avoid mounting where direct sunlight can reach the

outdoor temperature sensor. It is recommended to mount the outdoor temperature sensor on

a North-facing wall or in any well shaded area. The maximum transmitting range is 330 feet

(100 meters) obstacles such as walls, concrete, and large metal objects can reduce the range.

Place both units in their desired location, and wait approximately 10 minutes before

permanently mounting to ensure that there is proper reception. The outdoor temperature

sensor is not waterproof and should not be placed anywhere it will become submerged in

water or be directly in the rain.

POSITIONING THE ATOMIC CLOCK:

There are two possible ways to mount the atomic clock:

• use of the foldout table stands, or

• wall mounting

FOLDOUT TABLE STAND

The foldout table stand leg is located on the backside. Pull the stand out

from the bottom center edge of the atomic clock, below the battery

compartment. Once the foldout table stand is extended, place the atomic

clock in an appropriate location.

WALL MOUNTING

1) Using a straightedge, horizontally space at 4 inch (100mm) three

screw positions on a wall.

2) Install three mounting screws (not included) into a wall within

transmission range—leaving approximately 3/16 of an inch (5mm)

extended from the wall.

3) Place the atomic clock onto the screws, using the hanging holes on the

backside. Gently pull the atomic clock down to lock the screws into

place.

Note:

Always ensure that the atomic clock locks onto the screws before

releasing.

POSITIONING THE OUTDOOR TEMPERATURE SENSOR

The remote temperature sensor can be mounted with the use of screws

MOUNTING WITH SCREWS

1) Remove the mounting bracket from the remote

temperature sensor.

2) Place the mounting bracket over the desired location.

3) Through the three screw holes of the bracket, mark the

mounting surface with a pencil.

4) Screw mounting bracket onto the mounting surface.

Ensure that the screws are flush with the bracket.

5) Insert the remote temperature sensor into the bracket.

TROUBLESHOOTING

Problem: The LCD is faint.

Solution: 1) Replace the batteries.

Problem: No reception of WWVB signal

Solution: 1) It may help reception to face the front of the atomic clock in the general

direction of Ft. Collins, Colorado.

2) Wait overnight for signal.

3) Be sure the atomic clock is at least 6 feet (2 meters) from any electrical

devices, i.e. TV sets, computers, or other radio controlled clocks.

4) Remove batteries for five minutes, reinsert and leave the unit alone

overnight without pressing any keys.

Problem: Hour is incorrect (minute and date are correct).

Solution: 1) Be sure the correct time zone and daylight saving time are selected.

Problem: "OF.L“ appears in the indoor temperature section of the LCD

Solution: 1) Move the atomic clock to an area with warmer or cooler surrounding

temperature. Current surrounding temperatures are outside measuring

range.

2) Change batteries.

Problem: "--.-" appears in the outdoor temperature section of the LCD.

Solution: 1) Remove the batteries of both units for ten minutes, then reinsert them

again. Make sure the batteries are new and fresh.

2) Move the atomic clock closer to the sensor or place the sensor closer to

the atomic clock. Make sure the clock is at a receivable range from the

sensor.

3) Move the units to another location. Interferences from other electrical

devices operating on the same signal frequency (915MHz) may prevent

correct signal transmission and reception.

Problem: "OF.L“ appears in the outdoor temperature section of the LCD.

Solution: 1) Wait until the current surrounding temperature cools down or increases.

Current temperature is outside of the measuring range of the sensor. The

outdoor temperatur yed again once the current surrounding e will be displa

temperature is within the range of the sensor.

2) Change Batteries

3) Please see all basic troubleshooting info as well

MAINTENANCE AND CARE INSTRUCTIONS

• Extreme temperatures, vibration, and shock should be avoided to prevent damage to the

units.

• Clean displays and units with a soft, damp cloth. Do not use solvents or scouring

agents; they may mark the displays and casings.

• Do not submerge in water.

• Immediately remove all low powered batteries to avoid leakage and damage.

• Opening the casings invalidates the warranty. Do not try to repair the unit. Contact La

Crosse Technology for repairs.

• Do not make any repairs to the units. Please return it to the original point of purchase.

Opening and tampering with the units may invalidate the warranty.

SPECIFICATIONS:

Temperature measuring range

Indoor : 14.1ºF to 100ºF with 0.2ºF resolution

-9.9ºC to +37.8ºC with 0.1ºC resolution

("OF.L" displayed if outside this range)

Outdoor : -39.9ºF to +139.8ºF with 0.2ºF resolution

-39.8ºC to +59.9ºC with 0.1ºC resolution

("OF.L“ displayed if outside this range)

Temperature checking interval

Indoor : every 20 seconds

Outdoor : every 4 seconds

Transmission distance : maximum 330 feet (100 meters) in open field

Power source (Alkaline batteries recommended)

Atomic clock : 2 x AA, 1.5V batteries

Sensor : 2 x AA, 1.5V batteries

Battery life : about 24 months

Dimensions (L x W x H)

Atomic clock : 9.75“ x 10.33“ x 1.18“ / 247.9 x 262.1 x 30mm

Sensor : 5.05” x 1.50” x 0.83” / 128.3 x 38.2 x 21.2 mm

WARRANTY INFORMATION

La Crosse Technology, Ltd provides a 1-year limited warranty on this product against

manufacturing defects in materials and workmanship.

This limited warranty begins on the original date of purchase, is valid only on products

purchased and used in North America and only to the original purchaser of this product. To

receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem

determination and service procedures. Warranty service can only be performed by a La

Crosse Technology, Ltd authorized service center. The original dated bill of sale must be

presented upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse

Technology, Ltd’s authorized service center.

La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge

as stipulated herein, with new or reconditioned parts or products if found to be defective during

the limited warranty period specified above. All replaced parts and products become the

property of La Crosse Technology, Ltd and must be returned to La Crosse Technology, Ltd.

Replacement parts and products assume the remaining original warranty, or ninety (90) days,

whichever is longer. La Crosse Technology, Ltd will pay all expenses for labor and materials

for all repairs covered by this warranty. If necessary repairs are not covered by this warranty,

or if a product is examined which is not in need or repair, you will be charged for the repairs or

examination.

The owner must pay any shipping charges incurred in getting your La Crosse Technology, Ltd

product to a La Crosse Technol ogy, Ltd authorized service center.

Your La Crosse Technology, Ltd warranty covers all defects in material and workmanship with

the following specified exceptions: (1) damage caused by accident, unreasonabl e use or

neglect (including the lack of reasonable and necessary maintenance); (2) damage occurring

during shipment (claims must be presented to the carrier); (3) damage to, or deterioration of,

any accessory or decorative surface; (4) damage resulting from failure to follow instructions

contained in your owner’s manual; (5) damage resulting from the performance of repairs or

alterations by someone other than an authorized La Crosse Technology, Ltd authorized

service center; (6) units used for other than home use (7) applications and uses that this

product was not intended or (8) the products inability to receive a signal due to any source of

interference.

This warranty covers only actual defects within the product itself, and does not cover the cost

of installation or removal from a fixed installation, normal set-up or adjustments, claims based

on misrepresentation by the seller or performance variations resulting from installation-related

circumstances.

LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL,

CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE

OPERATION OR MALFUNCTION OF THIS PRODUCT. THIS PRODUCT IS NOT TO BE

USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION. THIS PRODUCT IS

NOT A TOY. KEEP OUT OF CHILDREN’S REACH.

This warranty gives you specific legal rights. You may also have other rights specific to your

State. Some States do no allow the exclusion of consequential or incidental damages

therefore the above exclusion of limitation may not apply to you.

For warranty work, technical support, or information contact:

La Crosse Technology, Ltd

2809 Losey Blvd S.

La Crosse, WI 54601

Phone: 608.782.1610

Fax: 608.796.1020

e-mail: support@lacrossetechnology.com

(warranty work)

sales@lacrossetechnology.com

(information on other products)

web: www.lacrossetechnology.com

Questions? Instructions? Please visit: www.lacrossetechnology.com/8318it

duplicated or processed using electronic, mechanical or chemical procedures without written

permission of the publisher.

This handbook may contain mistakes and printing errors. The information in this handbook is

regularly checked and corrections made in the next issue. We accept no liability for technical

mistakes or printing errors, or their consequences.

All trademarks and patents are acknowledged.

Produktspecifikationer

Varumärke:	La Crosse Technology
Kategori:	klocka
Modell:	WS-8318U-IT

Behöver du hjälp?

Om du behöver hjälp med La Crosse Technology WS-8318U-IT ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

klocka La Crosse Technology Manualer

La Crosse Technology WT-3145U Bruksanvisning

26 Oktober 2024

La Crosse Technology WT-3161WHX1 Bruksanvisning

3 Oktober 2024

La Crosse Technology 512-65937 Bruksanvisning

3 Oktober 2024

La Crosse Technology 404-3841B Bruksanvisning

2 Oktober 2024

La Crosse Technology 404-2636 Bruksanvisning

2 Oktober 2024

La Crosse Technology 404-2631GM Bruksanvisning

30 September 2024

La Crosse Technology 404-3015TX Bruksanvisning

27 September 2024

La Crosse Technology 404-3828A Bruksanvisning

26 September 2024

La Crosse Technology 404-3825HC Bruksanvisning

26 September 2024

La Crosse Technology 404-3041D Bruksanvisning

26 September 2024

klocka Manualer

Nyaste klocka Manualer

Ascot AB6-FW-155B Bruksanvisning

19 Oktober 2024

Ventus W152 Bruksanvisning

18 Oktober 2024

Technoline WT 495 Bruksanvisning

11 Oktober 2024

TFA 60.3539.02 Bruksanvisning

7 Oktober 2024

Auriol IAN 67176 Bruksanvisning

6 Oktober 2024

Hager EG 493E Bruksanvisning

5 Oktober 2024

Auriol IAN 270532 Bruksanvisning

3 Oktober 2024

Krontaler GT-KWC-03 B Bruksanvisning

30 September 2024

Auriol Z30237B Bruksanvisning

27 September 2024

IKEA SYKOMORLÖNN 005.824.61 Bruksanvisning

26 September 2024