Lab Gruppen C10:8X Bruksanvisning

Lab Gruppen mottagare C10:8X

Läs nedan 📖 manual på svenska för Lab Gruppen C10:8X (44 sidor) i kategorin mottagare. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/44

C SERIES

Dedicated Installation Ampliﬁers

Operation Manual

Rev. 2.0.0

Item n o. OM –CSX

C 20:8 X

C 10:8 X

C 10:4 X

C 5:4 X

1. Important safety instructions

2 C SERIES Operation Manual rev 2.0.0

1. Important safety instructions

Before using the device, be sure to carefully read the Safety Instructions. Keep this document with the device at

all times.

1. Read these instructions.

2. Keep these instructions

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance

with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including ampliers)

that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with

one wider than the other. A grounding-type plug has two

blades and a third grounding prong. The wide blade or

the third prong is provided for your safety. If the provided

plug does not t into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched,

particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

11. Only use attachments/accessories specied by the

manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table specied

by the manufacturer, or sold with the apparatus. When a

cart is used, use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when

unused for long periods of time.

14. Refer all servicing to qualied service personnel. Servicing

is required when the apparatus has been damaged in any

way, such as power-supply cord or plug is damaged, liquid

has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

15. Use the mains plug to disconnect the appartus from the

mains.

16. WARNING: To reduce the risk of re or electric shock, do not

expose this apparatus to rain or moisture.

17. Do not expose this equipment to dripping or splashing and

ensure that no objects lled with liquids, such as vases, are

placed on the equipment.

18. Do not connect the unit’s output to any other voltage source

such as battery, mains source, or power supply, regardless

of whether the unit is turned on or off.

19. Do not remove the top (or bottom) cover. Removal of the

cover will expose hazardous voltages. There are no user

serviceable parts inside and removal may void the warranty.

20. An experienced user shall always supervise this professional

audio equipment, especially if inexperienced adults or

minors are using the equipment.

21. The US National Differences clause 16.3 requires that

network cables must be ame rated VW-1.

1.1. Approvals

1.2. Warnings

1.2.1. Explanation of warning symbols

1.2.2. Warnings

To prevent electric shock do not remove top or bottom

covers. No user serviceable parts inside, refer servicing to

qualied service personnel.

Français: À prévenir le choc électrique n’enlevez pas les

couvercles. Il n’y a pas des parties serviceable à l’intérieur, tous

reparations doit etre faire par personnel qualié seulment.

The lightning bolt triangle is used to

alert the user to the presence of

un-insulated “dangerous voltages”

within the unit’s chassis that may be

of sufcient magnitude to constitute a

risk of electric shock to humans.

The exclamation point triangle is used to

alert the user to presence of important

operating and service instructions in the

literature accompanying the product.

This equipment conforms to the requirements

of the EMC Directive 2014/30/EC and the

requirements of the Low Voltage Directive

2014/35/EC.

Standards applied: EMC Emission

EN55103-1, E3

EMC Immunity EN55103-2, E3, with S/N

below 1% at normal operation level.

Electrical Safety EN60065, Class I

This equipment is tested and listed according to the

U.S. safety standard ANSI/ UL 60065 and

Canadian safety standard CSA C22.2

NO. 60065. Intertek made the tests and they

are a Nationally Recognized Testing Laboratory

(NRTL).

1. Important safety instructions

C SERIES Operation Manual rev 2.0.0 3

To completely disconnect this equipment from the AC

mains, disconnect the power supply cord plug from the AC

receptacle. The mains plug of the power supply cord shall

remain readily operable.

Français: Pour démonter complètement l’équipement de

l’alimentation générale, démonter le câble d’alimentation

de son réceptacle. La prise d’alimentation restera aisément

fonctionnelle.

To reduce risk of re or electric shock, do not expose this

apparatus to rain or moisture.

Français: Pour réduire les risques d’incendie ou de choc

électrique, n’exposez pas l’appareil à la pluie ou à l’humidité.

Do not expose this system/apparatus to dripping or splashing

and ensure that no objects lled with liquids, such as vases,

are placed on the apparatus.

Français: N’exposez pas ce système/appareil au

ruissellement ni aux éclaboussures et assurez-vous qu’aucun

objet contenant du liquide tel qu’un vase n’est placé sur

l’appareil.

This apparatus must be connected to a mains socket outlet

with a protective earthing connection.

Français: Cet appareil doit être raccordé à une prise secteur

avec terre de protection.

The mains plug is used as a disconnect device and shall

remain readily operable.

Français: Lorsque la prise du réseau d’alimentation est utilisés

comme dispositif de déconnexion, ce dispositif doit

demeuré aisément accessible.

1.2.3. Caution

To reduce the risk of  re or electric shock, do not remove screws.

No user-serviceable parts inside. Refer servicing to qualied

service personnel.

Français: Pour réduire le risque d’incendie ou de choc

électrique, ne pas retirer les vis. Aucune pièce réparable par

l’utilisateur. Coner l’entretien àpersonnel qualié.

1.2.4. User responsibility

Mains connection grounding

Your amplier must be connected to a grounded socket outlet.

Speaker output hazard on ampliﬁers

Ampliers are capable of producing hazardous output

voltages. To avoid electrical shock, do not touch any exposed

speaker wiring while the amplier is operating. The external

wiring connected to the speaker terminals shall be installed

by a qualied person, or ready-made leads or cords of

appropriate capacity shall be used.

As the power output channels on ampliers produce high

voltage, do not connect or disconnect speaker cables when

the mains power is on.

Radio interference

A sample of this product has been tested and complies with

the limits for the European Electro Magnetic Compatibility

(EMC) directive. This equipment has also been tested and

found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful

interference from electrical equipment. This product uses

radio frequency energy and if not used or installed in

accordance with these operating instructions, may cause

interference to other equipment, such as radio receivers.

However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which

can be determined by turning the equipment on and off, the

user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment to an outlet on a circuit different

from that to which the receiver is connected.

• Check if the affected unit complies with the EMC limits for

immunity, (CE-labeled). If not, address the problem with

the manufacturer or supplier. All electrical products sold

in the EC must be approved for immunity against

electromagnetic elds, high voltage ashes, and radio

interference.

• Consult the dealer or an experienced radio/TV technician

for help.

Speaker damage

Amplier apparatus is very powerful and can be potentially

dangerous to both loudspeakers and humans alike. Many

loudspeakers can be easily damaged or destroyed by

overpowering them. Always check the speaker’s continuous

and peak power capabilities. Although the ampliers

attenuators can be used to reduce the overall gain, an

increase of the input signal can result in full output power,

which may cause damage to connected speakers.

Maintenance

For safe and reliable operation, the dust  lters on both sides

of the front panel, behind the grilles, should be removed and

cleaned regularly to ensure maximum airow through the

device.

If the dust lters are not maintained there will be safety

risks; for example, high internal temperatures could ignite

the dust and start a re. There is also a risk that the unit will

malfunction since it is dependent on constant airow from

front to rear. If the dust  lters are not clean and the unit

malfunctions, any resulting problems will not be covered by

the warranty.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003

du Canada.

Produktspecifikationer

Varumärke:	Lab Gruppen
Kategori:	mottagare
Modell:	C10:8X

Behöver du hjälp?

Om du behöver hjälp med Lab Gruppen C10:8X ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

mottagare Lab Gruppen Manualer

Lab Gruppen PLM 8K44 BP Bruksanvisning

23 September 2024

Lab Gruppen PLM 8K44 SP Bruksanvisning

23 September 2024

Lab Gruppen fP 2200 Bruksanvisning

15 September 2024

Lab Gruppen FP 10000Q Bruksanvisning

15 September 2024

Lab Gruppen CA1201 Bruksanvisning

15 September 2024

Lab Gruppen CRC-VEU-BK Bruksanvisning

15 September 2024

Lab Gruppen CM82 Bruksanvisning

15 September 2024

Lab Gruppen CA602 Bruksanvisning

15 September 2024

Lab Gruppen C48:4 Bruksanvisning

15 September 2024

Lab Gruppen C88:4 Bruksanvisning

15 September 2024

mottagare Manualer

Nyaste mottagare Manualer

Speco Technologies PBM120AT Bruksanvisning

27 Oktober 2024

Fosi Audio V3 Bruksanvisning

26 Oktober 2024

Jensen CAR710-4BC Bruksanvisning

26 Oktober 2024

Onkyo TX-RZ830 Bruksanvisning

24 Oktober 2024

Pioneer VSX-1122K Bruksanvisning

22 Oktober 2024

NAD C 355BEE Bruksanvisning

21 Oktober 2024

Yamaha HTR-5072 Bruksanvisning

21 Oktober 2024

Yamaha RX-A810 Bruksanvisning

20 Oktober 2024

Sherwood R-607 Bruksanvisning

20 Oktober 2024

Denon AVC-S660H Bruksanvisning

19 Oktober 2024