Lab Gruppen IPX 1200 Bruksanvisning

Lab Gruppen mottagare IPX 1200

Läs nedan 📖 manual på svenska för Lab Gruppen IPX 1200 (4 sidor) i kategorin mottagare. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/4

Third Party Instructions

IPX Series

Item no. TP CI - IPX

V 1.0.0

2IPX Series

Introduction

The Lab.gruppen IPX Series of ampliers can be controlled directly from a Telnet

client over TCP/IP, without running the IPX Controller software. This document

describes how.

Telnet clients

In this document we assume you know the IP address of the unit you want to

address, as well as the telnet user name and password.

If you are running e.g. Windows 10 you might rst need to turn on your Windows

Telnet feature. Please see link for further instructions:

https://social.technet.microsoft.com/wiki/contents/articles/38433.windows-10-

enabling-telnet-client.aspx

Windows

1. Open a Windows Command prompt

2. Type: telnet [unit’s IP address] 23

3. Enter the user name and password

4. Now you are connected.

MAC OS-X

1. Open a Terminal window

2. Click Shell – New Remote Connection...

3. Type: telnet [unit’s IP address] 23

4. Enter the user name and password

5. Now you are connected.

Other platforms

For specic information on how to access IPX Series ampliers using other

platforms, we refer to the associated platforms user manual. Communicating

with IPXs require the use of Telnet protocol.

Controlling Settings

Some examples are available in the help menu from the interface itself.

Type “h<enter>” for help, or “x<enter>” for some examples.

All settings are addressed by 4 parameters to identify the setting,

as well as a value.

The parameters are:

• Channel: The channel you wish to apply the setting to. Input channels start

at 0 (so input one will be channel 0), output channels start at channel 128

(so output one will be channel 128). For settings that do not need a channel,

set it to zero. Set the channel by typing “c[channel] <enter>”, e.g. “c0”

then hit enter.

• Index: Some settings have multiple values per channel, and in some cases the

index is used for special cases. When in doubt, set it to zero. Set the index by

typing “i[index] <enter”.

• Item: the top level category of the setting. Set it by “m[item] <enter>”

• Sub-item: The lower level category of the setting. Set it by “n[item] <enter>”

The available settings are:

• Gain: Item 1, sub-item 1. Values are set in steps of 0.01dB, so to set the gain to

1dB, set the value to 100.

• Mute: Item 2, sub-item 2. 1=mute, 0=unmute.

• Command: Item 3, sub-item 3. The command is selected by setting the index

to the command number. See below for available commands.

• Select Preset: Item 4, sub-item 4. To load a preset, select the preset number

using this setting, then send the “Load Preset” command.

The available commands are:

• Go to standby: 4

• Exit standby: 5

• Load preset: 1

• Locate (Ping): 6

To enter the value, type “v[value] <enter>”.

After setting the desired item and value,

it must be executed by typing “e <enter>”

Third Party Instructions 3

Comand matrix > > > > > >

Function Item Sub item Channel Index number Value Execute

Gain: m1 n1 e.g. “c128” – e.g. “v120” (1,2 dB) e

Mute m2 n2 e.g. “c128” – ev1

Unmute m2 n2 e.g. “c128” – ev0

Go to standby – – em3 n3 i4

Exit standby – – em3 n3 i5

Locate (ping) m3 n3 – – ei6

Select preset m4 n4 – – “v1 - 100” e

Load preset m3 n3 – – ei1

Input channel 1 Input channel 2 No specic channelOutput channel 1 Output channel 2

Channels c0 c0c1 c128 c129

Gain values Values are set in steps of 0.01 dB, so to set the gain to 1,2 dB, set the value to 120.

Produktspecifikationer

Varumärke:	Lab Gruppen
Kategori:	mottagare
Modell:	IPX 1200

Behöver du hjälp?

Om du behöver hjälp med Lab Gruppen IPX 1200 ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

mottagare Lab Gruppen Manualer

Lab Gruppen PLM 8K44 BP Bruksanvisning

23 September 2024

Lab Gruppen PLM 8K44 SP Bruksanvisning

23 September 2024

Lab Gruppen fP 2200 Bruksanvisning

15 September 2024

Lab Gruppen FP 10000Q Bruksanvisning

15 September 2024

Lab Gruppen CA1201 Bruksanvisning

15 September 2024

Lab Gruppen CRC-VEU-BK Bruksanvisning

15 September 2024

Lab Gruppen CM82 Bruksanvisning

15 September 2024

Lab Gruppen CA602 Bruksanvisning

15 September 2024

Lab Gruppen C48:4 Bruksanvisning

15 September 2024

Lab Gruppen C88:4 Bruksanvisning

15 September 2024

mottagare Manualer

Nyaste mottagare Manualer

Alto D1 Bruksanvisning

16 Januari 2025

Alto MC700.4 Bruksanvisning

16 Januari 2025

Alto MC250.4 Bruksanvisning

16 Januari 2025

Alto MC250.8 Bruksanvisning

16 Januari 2025

Alto D4 Bruksanvisning

16 Januari 2025

Alto D3 Bruksanvisning

16 Januari 2025

Alto MC500.4 Bruksanvisning

16 Januari 2025

S.M.S.L PA200 Bruksanvisning

15 Januari 2025

Peavey CKd 608 Bruksanvisning

15 Januari 2025

Wavtech link700.4plus Bruksanvisning

14 Januari 2025