Lanbo LB36BD Bruksanvisning

Lanbo kylskåp LB36BD

Läs nedan 📖 manual på svenska för Lanbo LB36BD (1 sidor) i kategorin kylskåp. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/1
Installation Instructions
Before Using Your Wine Cooler / Beverage Cooler
Remove the exterior and interior packing.
Before connecting the wine cooler / beverage cooler to the power source, let it
stand upright for approximately 24 hours. This will reduce the possibility of a
malfunction in the cooling system from handling during transportation.
Clean the interior surface with lukewarm water with a soft cloth.
The cooler is specially designed for wine storage, please do not put in other
goods.
Installation:
The cooler should be placed independently so as to make sure good heat dissipation.
The back of the cooler should be away from the wall 10cm at minimum.
Place your wine cooler / beverage cooler on a floor that is strong enough to support it
when it is fully loaded. To level your wine cooler, adjust the front leveling leg at the
bottom of the wine cooler.
Locate the wine cooler / beverage cooler away from direct sunlight and sources of heat
(stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat
sources may increase electrical consumption. Extreme cold ambient temperatures
may also cause the unit not to perform properly.
Avoid locating the unit in moist areas.
Plug in the proper power socket. Make sure that the shape and voltage of the socket is
consistent with the nameplate on the back of the cooler.

Produktspecifikationer

Varumärke: Lanbo
Kategori: kylskåp
Modell: LB36BD

Behöver du hjälp?

Om du behöver hjälp med Lanbo LB36BD ställ en fråga nedan och andra användare kommer att svara dig




kylskåp Lanbo Manualer

kylskåp Manualer

Nyaste kylskåp Manualer