Lanzar VCT2020 Bruksanvisning

Lanzar mottagare VCT2020

Läs nedan 📖 manual på svenska för Lanzar VCT2020 (14 sidor) i kategorin mottagare. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/14

36Watts 2 Channel High Power MOSFET Amplifier

with Protection LED Indicator

www.Lanzar.com

You have purchased a quality product designed and engineered to give you many years of uncompromised

musical service. are designed with the lates technology available, which providesLanzar Vector ampliers

headroom for even the most demanding peaks and dynamic ranges found on modern CD's and recordings.

TABLE OF CONTENTS

Features and Specications

Electrical Connections

Stereo/Mono Input Connections

System Wiring Speaker Connections

Mounting and Installation

Protection Circuitry and Troubleshooting

Precautions

PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY

AND KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE.

www.Lanzar.com

Features and Specications

Crossover Mode Selector: When used with neutral, full range system, set this switch to " ". lf you wish to use the FULL

internal crossover to power a driver or specic frequency range, use the " " or " ' for the "LPF HPF L0WPASS HIGH-" or "

PASS" settings.

Input Level Controls: Enables the matching of input levels to the output levels from head unit (or other signal source).

The input sensitivity of adjustment ranges from 6V to 200mV.

Crossover Frequency Control: When crossover mode selector is in HIGHPASS mode, this cantrol sets the lower

frequency limit for audio program sent to the speakers. When crossover mode selector is in LOWPASS mode, this

control sets the upper frequency limit for audio program sent to the speakers. The crossover is continously variable

adjustment from 40 to 250Hz.

Bass Boost Selector: This selector switch permits the bass level an increase of 18dB.

Low Level Input: This amp features RCA type jacks for high impedance input. Use these with car stereo input which

uses RCA type connector cables.

High Level Input: If your car stereo jacks are not RCA type output, use the high-low level input adaptor to connect the

speaker output leads of car stereo and the RCA input jacks of amp.

AUX Line Outputs: This amp features RCA jacks for AUX line outputs. Use these for unlimited system expansion to the

next amplier.

Produktspecifikationer

Varumärke:	Lanzar
Kategori:	mottagare
Modell:	VCT2020
Färg på produkten:	Zwart
Vikt:	349 g
Bredd:	124.2 mm
Djup:	8.89 mm
Höjd:	210.82 mm
Batterikapacitet:	4200 mAh
Blåtand:	Ja
Skärm diagonal:	8 "
Upplösning:	1280 x 800 Pixels
Processorfrekvens:	1.2 GHz
Processorfamilj:	Qualcomm Snapdragon
Intern lagringskapacitet:	16 GB
4G standard:	LTE
Wi-Fi-standarder:	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Plats position:	Ja
Vormfaktor:	Slate
Bakre kameraupplösning (numerisk):	5 MP
Främre kameraupplösning (numerisk):	2 MP
Typ bakre kamera:	Enkele camera
Inkluderar operativsystem:	Android 6.0
Plattform:	Android
Integrerad minneskortläsare:	Ja
Kompatibla minneskort:	MicroSD (TransFlash)
Pekskärmstyp:	Capacitief
Assisterad GPS (A-GPS):	Ja
HD typ:	WXGA
Internminne:	1 GB
Förvarings media:	Flash
Batteritid/batteritid:	- uur
WiFi-standard:	Wi-Fi 4 (802.11n)
Typ av enhet:	Mobiele tablet
Standbytid:	888 uur
Typ av panel:	TFT
Fram kamera:	Ja
Mobil nätverksanslutning:	Nee
Kombinerad hörlurs/mikrofonport:	Ja
Antal mikro-USB 2.0-portar:	1
Andra kameraupplösningen:	2560 x 1920 Pixels