Liftmaster 041A3504-1 Bruksanvisning

Läs nedan 📖 manual på svenska för Liftmaster 041A3504-1 (1 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/1
To prevent possible SERIOUS INJURY or DEATH from
electrocution, disconnect power to opener BEFORE proceeding.
© 2008 The Chamberlain Group, Inc.
114A2668B All Rights Reserved
433MHz Receiver Logic Board
Antenna Extension Kit
Model 41A3504-1
Plug smooth
end into
logic board
connector
Connector
under "Learn"
Button
Antenna to be
placed on end of
coaxial cable, or
mounted on
exterior antenna
bracket
Antenna
bracket
The Antenna Extension Kit model 41A3504-1 was
designed to work with the 433MHz Receiver
Logic Boards.
This kit contains an antenna, coaxial cable, adapter and
an antenna bracket.
After replacing your receiver panel, follow the instructions
below to access the logic board connector and install the
antenna extension.
Installation
1. Screw the threaded end of the adapter into either end
of the coaxial cable.
2. Plug the smooth end of the adapter into the connector
on the logic board. The connector is located under the
“Learn” button on the rear panel of the opener.
3. The antenna bracket can be mounted inside on the
header, or for maximum range, outside the structure.
Route the coaxial cable accordingly.
4. Attach the antenna and coaxial cable to the antenna
bracket as illustrated.
5. Mount antenna bracket so the antenna is unobstructed
and away from any metal or steel.
NOTE: Do NOT modify or remove the existing antenna.
Screw threaded
end of Adapter
into Coaxial Cable

Produktspecifikationer

Varumärke: Liftmaster
Kategori: Inte kategoriserad
Modell: 041A3504-1

Behöver du hjälp?

Om du behöver hjälp med Liftmaster 041A3504-1 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Liftmaster Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer