Lorex LW2701AC1 Bruksanvisning

Lorex övervakningskamera LW2701AC1

Läs nedan 📖 manual på svenska för Lorex LW2701AC1 (2 sidor) i kategorin övervakningskamera. Denna guide var användbar för 20 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/2
LW2701AC1 SERIES QSG_EN_R2 Page 1
www.lorextechnology.com
CONTENTS:
Quick Start Guide
Digital Wireless Color
Camera with Stand
Wireless Antenna
for camera
Power Adaptor
for camera*
• Mount the camera indoors or outdoors. For outdoor
installation, mount it in a sheltered place where it is not
directly exposed to rain or snow.
• Aim the Cameras to best optimize the viewing area:
Select a location for the camera that provides a clear
view of the area you want to monitor, which is free from
dust, and is not in line-of-sight to a strong light source
or direct sunlight.
• Avoid installing the cameras where there are thick
walls, obstructions, or interference (i.e. transformers,
microwave ovens or other electrical equipment)
between the Cameras and the Receiver.
• Select a location for the camera that has an ambient
temperature between 14°F~122°F (-10°C~50°C)
• Before starting permanent installation, have another
person hold the camera for you while you verify its
performance by observing the image on a monitor.
INSTALLING THE CAMERA
Before you install the camera, carefully plan where and how it will be
positioned, and where you will route the cable that connects the
camera to the power adaptor.
INSTALLATION WARNINGS
1. Carefully unpack the Camera.
2. Mount the stand to the wall:
• Mark the position of the
screw holes on the wall.
• Drill holes and insert the
drywall plugs as needed.
• Firmly attach the stand
to the wall using the
provided screws.
3. Attach the Antenna to the
Camera prior to mounting.
4. Place the camera in the
desired mounting position.
Tighten the thumbscrews
to secure the camera to the
Stand. Adjust the angle of
the camera until the
desired view is set.
*May not be exactly as shown
NOTE: AVOID INSTALLING IN A
LOCATION WHICH REQUIRES
THE WIRELESS SIGNAL TO PASS
THROUGH CEMENT, CONCRETE
AND METAL STRUCTURES. THIS
WILL REDUCE THE
TRANSMISSION RANGE.
Mounting
Hardware Kit
COLOR DIGITAL WIRELESS INDOOR/OUTDOOR
ACCESSORY MOTION CAMERA
LW2701AC1 SERIES - QUICK START GUIDE
CAMERA OVERVIEW
1. Passive IR motion sensor for more accurate PIR Sensor:
motion recording.
2. Built-in microphone underneath camera body.Microphone:
3. Camera lens.Lens:
4. Night vision IR LEDs used for viewing in Night Vision IR:
complete darkness.
5. Speaker for two-way audio.Speaker:
6. Pairing button. Pair:
7. Wireless antenna.Antenna:
8. Power Cable: Connect the included power adapter to the
cable extending from the camera.
7
LW2701AC1 SERIES QSG_EN_R2 Page 2
www.lorextechnology.com
CONNECTING CAMERA POWER ADAPTOR
Connect one end of the camera Power Adaptor to the camera and the other end to an electrical outlet.
It’s all on the Web
For detailed setup information,
please refer to your User’s Manual.
For additional information, please
visit our website
www.lorextechnology.com
1. Press on the wireless receiver or remote control.MENU
2. From the Main Menu, select and press the Pairing
Enter button.
3. Select Camera 3 Camera 4 or and press the Enter
button.
4. Following the on-screen prompt, press the Pair button
on the rear panel of the camera. You have 30 seconds
to press the PAIR button on the camera. Once paired,
the camera will be immediately displayed on-screen.
NOTE: If you do press the Pair button on the camera during
the 30 second pairing window, repeat steps 1~5 to try the
pairing process again.
Pairing Button
ADDING THE ACCESSORY CAMERA TO YOUR SYSTEM
The Pairing Function assigns each camera to a different
channel on the wireless receiver (connect up to 4
Cameras), and is necessary for configuring additional
cameras. By default the cameras that came with the
LW2702 system are assigned to channel no. 1 and 2.
NOTE: It is highly recommended to pair the Accessory
Camera to the Receiver before permanently mounting the
camera. For detailed information, please check the
owners manual for the LW2702 system available at
www.lorextechnology.com
Connect power adaptor to
local 120V AC power outlet
COLOR DIGITAL WIRELESS INDOOR/OUTDOOR
ACCESSORY MOTION CAMERA
LW2701AC1 SERIES - QUICK START GUIDE

Produktspecifikationer

Varumärke: Lorex
Kategori: övervakningskamera
Modell: LW2701AC1

Behöver du hjälp?

Om du behöver hjälp med Lorex LW2701AC1 ställ en fråga nedan och andra användare kommer att svara dig


övervakningskamera Lorex Manualer

Lorex

Lorex LNZ43P4A Bruksanvisning

8 Januari 2025
Lorex

Lorex C221NA Bruksanvisning

8 Januari 2025
Lorex

Lorex C221NC Bruksanvisning

8 Januari 2025
Lorex

Lorex W463AQ Bruksanvisning

2 Januari 2025
Lorex

Lorex E891AB Bruksanvisning

7 Oktober 2024
Lorex

Lorex DP181-42NAE Bruksanvisning

29 September 2024
Lorex

Lorex E842CA Bruksanvisning

24 September 2024
Lorex

Lorex E842CAWP Bruksanvisning

24 September 2024
Lorex

Lorex E842CAB Bruksanvisning

24 September 2024
Lorex

Lorex LNE45DDW Bruksanvisning

23 September 2024

övervakningskamera Manualer

Nyaste övervakningskamera Manualer

Philips

Philips B120E Bruksanvisning

16 Januari 2025
Dahua Technology

Dahua Technology Pro IPC-HDPW5442G-Z Bruksanvisning

10 Januari 2025
Hikvision

Hikvision DS-2CE59U1T-AVPIT3ZF Bruksanvisning

8 Januari 2025
Hikvision

Hikvision IDS-2CD7526G0-IZHSY Bruksanvisning

8 Januari 2025
Hikvision

Hikvision DS-2CD2163G0-I(S) Bruksanvisning

8 Januari 2025
Hikvision

Hikvision DS-2CD2H83G1-IZS Bruksanvisning

8 Januari 2025
Speco Technologies

Speco Technologies O5LB1 Bruksanvisning

8 Januari 2025
ZKTeco

ZKTeco AntarVis 2.0 Bruksanvisning

8 Januari 2025
Speco Technologies

Speco Technologies O2P30X Bruksanvisning

8 Januari 2025
TP Link

TP Link InSight S345ZI Bruksanvisning

8 Januari 2025