Magnus DX-5330M Bruksanvisning

Magnus Stativ DX-5330M

Läs nedan 📖 manual på svenska för Magnus DX-5330M (8 sidor) i kategorin Stativ. Denna guide var användbar för 13 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/8
Owner’s
Manual
Photo Tripod
DX-M
Photo Tripod Components
Thank you for choosing Magnus.
Congratulations on the purchase of your new Magnus
tripod. This tripod features a rapid center column
that detaches to serve as an adjustable four-section
monopod, and telescoping legs with flip-locks for fast
and easy leg adjustments. The three-way pan & tilt
head gives you total control over camera positioning,
and the quick-release plate features a 1/4”-20 male
thread for universal camera mounting. There is also
a bubble level to ensure that your shot is properly
aligned.
Please read and follow these instructions, and keep
this manual in a safe place.
Platform Orientation
Locking Knob
Universal ¼-20
Mounting Screw
Tilt/Pan Bar /
Tilt Lock
Center Column
Locking Knob
Foam Padding
Center Brace
Locking Collar
Retractable
Spiked Feet
Quick-Release
Mounting Plate
Pan Locking
Knob
Leg
Flip-Lock
Image is for illustration purposes only.
Features vary by model.
Center column/
monopod
Opening the Tripod
1 Always extend the legs from the top flip-locks first.
Pull out on each flip-lock and extend the legs to the
desired height. Close each flip-lock. (See Figs. A-B.)
2 Rotate the locking
collar counterclockwise
to release the center
brace, and gently pull
the legs out. Push
down on the center
brace, and then rotate
the locking collar
clockwise to lock the
legs in place (Fig. C).
Mounting the Quick-Release Plate to the
Camera
1 To remove the quick-release plate from the tripod
head, use your thumb to turn out and hold the plate
locking lever and remove the quick-release plate
(Fig. D).
2 Line up the quick-release plate lengthwise with the
bottom of the camera. Match the quick-release
plate screw to the camera’s mounting thread, and
mount the plate to the camera by flipping out the
D-ring handle to rotate the screw clockwise until
snug (Fig. E).
3 Press down on the D-ring so that it is flat against
the bottom of the quick-release plate. Mount the
camera/quick-release plate assembly to the tripod
Figure A Figure B
Figure EFigure D
Figure C

Produktspecifikationer

Varumärke: Magnus
Kategori: Stativ
Modell: DX-5330M
Enhetsplacering: Ingebouwd
Typ av operation: Draaiknop
Färg på produkten: Roestvrijstaal
Inbyggd display: Nee
Bredd: 585 mm
Djup: 510 mm
Höjd: 30 mm
Brännare/kokzonseffekt 2: 3000 W
Brännare/kokzonseffekt 3: 1750 W
Brännare/kokzonseffekt 1: 1750 W
Antal brännare/kokzoner: 4 zone(s)
Typ av häll: Gaskookplaat
Brännare/kokzon typ 1: Regulier
Brännare/kokzon typ 2: Groot
Typ av brännare/kokzon 3: Regulier
Antal gasbrännare: 4 zone(s)
Antal elektroniska kokzoner: 0 zone(s)
Sjud brännare/kokzon: 1000 W
Normal brännare/kokzon: 1750 W
Kontrollposition: Rechtsboven
Ansluten last (elektrisk): - W
Stor brännare/kokzon: 3000 W
Ansluten last (gas): - W
Bredd på häll: 60 cm
Beeldscherm: Nee
Pannstödsmaterial: Geglazuurd
Typ av brännare/kokzon 4: Sudderen
Brännare/kokzonseffekt 4: 1000 W
Strömkälla brännare/kokzon 1: Gas
Strömkälla brännare/kokzon 2: Gas
Strömkälla brännare/kokzon 3: Gas
Strömkälla för brännare/kokzon 4: Gas
Placera brännare/kokzon 1: Links achter
Placera brännare/kokzon 2: Links voor
Placera brännare/kokzon 3: Rechts achter
Placera brännare/kokzon 4: Rechts voor
Kokzon 1 form: Rond
Kokzon 2 form: Rond
Kokzon 3 form: Rond
Kokzon 4 form: Rond
Inbyggd fläktkåpa: Nee

Behöver du hjälp?

Om du behöver hjälp med Magnus DX-5330M ställ en fråga nedan och andra användare kommer att svara dig




Stativ Magnus Manualer

Stativ Manualer

Nyaste Stativ Manualer