Makita 6302H Bruksanvisning

Makita Borrmaskin 6302H

Läs nedan 📖 manual på svenska för Makita 6302H (12 sidor) i kategorin Borrmaskin. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/12

I N S T R U C T I O N M A N U A L

WARNING:

For your personal safety, READ and UNDERSTAND before using.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

w w w . m a k i t a t o o l s . c o m

Drill

13 mm (1/2”)

MODEL 6302H

13 mm (1/2”)

MODEL 6303H

002996

DOUBLE

INSULATION

SPECIFICATIONS

• Manufacturer reserves the right to change specifications without notice.

• Specifications may differ from country to country.

GENERAL SAFETY RULES USA002-2

(For All Tools)

WARNING:

Read and understand all instructions. Failure to follow all

instructions listed below, may result in electric shock, fire and/or

serious personal injury.

SAVE THESE INSTRUCTIONS

Work Area

1. Keep your work area clean and well lit.

Cluttered benches and dark areas invite acci-

dents.

2. Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases, or dust. Power

tools create sparks which may ignite the dust

or fumes.

3. Keep bystanders, children, and visitors

away while operating a power tool. Distrac-

tions can cause you to lose control.

Electrical Safety

4. Double insulated tools are equipped with

a polarized plug (one blade is wider than

the other.) This plug will fit in a polarized

outlet only one way. If the plug does not fit

fully in the outlet, reverse the plug. If it

still does not fit, contact a qualified elec-

trician to install a polarized outlet. Do not

change the plug in any way. Double insula-

tion eliminates the need for the three wire

grounded power cord and grounded power

supply system.

5. Avoid body contact with grounded sur-

faces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of

electric shock if your body is grounded.

Model 6302H 6303H

Capacities Steel 13 mm (1/2”) 13 mm (1/2”)

Wood 36 mm (1-3/8”) 36 mm (1-3/8”)

No load speed (RPM) 0 - 550/min. 0 - 850/min.

Overall length 285 mm (11-1/4”) 285 mm (11-1/4”)

Net weight 2.2 kg (4.8 lbs) 2.2 kg (4.8 lbs)

6. Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

7. Do not abuse the cord. Never use the cord

to carry the tools or pull the plug from an

outlet. Keep cord away from heat, oil,

sharp edges or moving parts. Replace

damaged cords immediately. Damaged

cords increase the risk of electric shock.

8. When operating a power tool outside, use

an outdoor extension cord marked “W-A”

or “W”. These cords are rated for outdoor

use and reduce the risk of electric shock.

Personal Safety

9. Stay alert, watch what you are doing and

use common sense when operating a

power tool. Do not use tool while tired or

under the influence of drugs, alcohol, or

medication. A moment of inattention while

operating power tools may result in serious

personal injury.

10. Dress properly. Do not wear loose cloth-

ing or jewelry. Contain long hair. Keep

your hair, clothing, and gloves away from

moving parts. Loose clothes, jewelry, or long

hair can be caught in moving parts.

11. Avoid accidental starting. Be sure switch

is off before plugging in. Carrying tools with

your finger on the switch or plugging in tools

that have the switch on invites accidents.

12. Remove adjusting keys or wrenches

before turning the tool on. A wrench or a

key that is left attached to a rotating part of

the tool may result in personal injury.

13. Do not overreach. Keep proper footing

and balance at all times. Proper footing and

balance enables better control of the tool in

unexpected situations.

14. Use safety equipment. Always wear eye

protection. Dust mask, non-skid safety

shoes, hard hat, or hearing protection must

be used for appropriate conditions. Ordinary

eye or sun glasses are NOT eye protection.

Tool Use and Care

15. Use clamps or other practical way to

secure and support the workpiece to a

stable platform. Holding the work by hand or

against your body is unstable and may lead

to loss of control.

16. Do not force tool. Use the correct tool for

your application. The correct tool will do the

job better and safer at the rate for which it is

designed.

17. Do not use tool if switch does not turn it

on or off. Any tool that cannot be controlled

with the switch is dangerous and must be

repaired.

18. Disconnect the plug from the power

source before making any adjustments,

changing accessories, or storing the tool.

Such preventive safety measures reduce the

risk of starting the tool accidentally.

19. Store idle tools out of reach of children

and other untrained persons. Tools are

dangerous in the hands of untrained users.

20. Maintain tools with care. Keep cutting

tools sharp and clean. Properly maintained

tools with sharp cutting edges are less likely

to bind and are easier to control.

21. Check for misalignment or binding of

moving parts, breakage of parts, and any

other condition that may affect the tools

operation. If damaged, have the tool ser-

viced before using. Many accidents are

caused by poorly maintained tools.

22. Use only accessories that are recom-

mended by the manufacturer for your

model. Accessories that may be suitable for

one tool, may become hazardous when used

on another tool.

SERVICE

23. Tool service must be performed only by

qualified repair personnel. Service or main-

tenance performed by unqualified personnel

could result in a risk of injury.

24. When servicing a tool, use only identical

replacement parts. Follow instructions in

the Maintenance section of this manual.

Use of unauthorized parts or failure to follow

Maintenance instructions may create a risk of

electric shock or injury.

Produktspecifikationer

Varumärke:	Makita
Kategori:	Borrmaskin
Modell:	6302H
Färg på produkten:	Wit
Vikt:	2975 g
Höjd:	100 mm
Antal lampor:	1 gloeilamp(en)
Strömlampa:	40 W
Monteringsmetod:	Opbouw
Diameter:	660 mm
Typ av strömkälla:	AC
Form:	Rond
Lichtstroom:	4000 lm
Färgtemperatur:	3050 K
skyddsklass:	I
Lämplig för inomhusbruk:	Ja
Dimbar:	Ja
Lämplig plats:	Woonkamer
AC-ingångsspänning:	220 - 240 V
AC-ingångsfrekvens:	50 - 60 Hz
Energieffektivitetsklass ingår lampa (gammal):	A+