Makita 6310 Bruksanvisning
Makita
Skruvborrar
6310
Läs nedan 📖 manual på svenska för Makita 6310 (32 sidor) i kategorin Skruvborrar. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/32
GB
2-speed drill Instruction Manual
F
2 vitesses perceuse Manuel d’Instructions
D
2-Gang Bohrmaschine Betriebsanleitung
I
2 velocità trapano Istruzioni d’Uso
NL
2 snelheden boormachine Gebruiksaanwijzing
E
2 velocidad taladro Manual de Instrucciones
P
Berbequim de 2 velocidades Manual de Instruço˜ es
DK
2-gears boremaskine Brugsanvisning
S
Tvåväxlad borrmaskin Bruksanvisning
N
Boremaskin med to hastigheter Bruksanvisning
SF
2-nopeuksinen porakone Käyttöohje
GR ∆Ú˘¿ÓÈ 2 Ù·¯˘Ù‹ÙˆÓ √‰ËÁ›Â˜ ¯Ú‹Ûˆ˜
6310
1 2
3 4
5 6
7
2
ENGLISH Explanation of general view
1Side grip
2Tighten
3Chuck key
4Sleeve
5Ring
6Depth gauge
7Screw
8High
9Low
0Speed control screw
qSwitch trigger
wLock button
eReversing switch lever
rSpeed change knob
t0 – 2,000 R/min.
y0 – 700 R/min.
uArrow
SPECIFICATIONS
Model 6310
Capacities
Steel ................................................................................................ Hi: 8 mm Low: 13 mm
Wood ............................................................................................... Hi: 20 mm Low: 32 mm
No load speed (RPM) ........................................................................ Hi: 0 – 2,000 Low: 0 – 700
Overall length .................................................................................... 310 mm
Net weight .......................................................................................... 2 kg
•Due to the continuing program of research and
development, the specifications herein are subject
to change without prior notice.
•Note: Specifications may differ from country to
country.
Power supply
The machine should be connected only to a power
supply of the same voltage as indicated on the
nameplate, and can only be operated on single-phase
AC supply. They are double-insulated in accordance
with European Standard and can, therefore, also be
used from sockets without earth wire.
Safety hints
For your own safety, please refer to enclosed Safety
instructions.
These symbols mean:
Read instruction manual.
DOUBLE INSULATION
ADDITIONAL SAFETY RULES
1. Always be sure you have a firm footing. Be
sure no one is below when using the machine
in high locations.
2. Hold the machine firmly.
3. Keep hands away from rotating parts.
4. When drilling into walls, floors or wherever
‘‘live’’ electrical wires may be encountered, DO
NOT TOUCH ANY METAL PARTS OF THE
MACHINE! Hold the machine by the insulated
grasping surfaces to prevent electric shock if
you drill into a ‘‘live’’ wire.
5. Do not leave the machine running. Operate the
machine only when hand-held.
6. Do not touch the drill bit or the workpiece
immediately after operation; they may be
extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
OPERATING INSTRUCTIONS
Installing side grip (auxiliary handle) (Fig. 1)
Screw the side grip on the machine securely.
Installing or removing drill bit
Important:
Always be sure that the machine is switched off and
unplugged before installing or removing the bit.
For machines with standard keyed chuck (Fig. 2)
To install the bit, place it in the chuck as far as it will
go. Tighten the chuck by hand. Place the chuck key in
each of the three holes and tighten clockwise. Be sure
to tighten all three chuck holes evenly. To remove the
bit, turn the chuck key counterclockwise in just one
hole, then loosen the chuck by hand.
After using the chuck key, be sure to return it to the
original position.
For machines with keyless chuck (Fig. 3)
Hold the ring and turn the sleeve counterciockwise to
open the chuck jaws. Place the bit in the chuck as far
as it will go. Hold the ring firmly and turn the sleeve
clockwise to tighten the chuck. To remove the bit, hold
the ring and turn the sleeve counterclockwise.
Adjusting depth of drilling (Fig. 4)
Loosen the screw and adjust the depth gauge to the
desired depth. After adjusting, tighten the screw.
3
Produktspecifikationer
| Varumärke: | Makita |
| Kategori: | Skruvborrar |
| Modell: | 6310 |
Behöver du hjälp?
Om du behöver hjälp med Makita 6310 ställ en fråga nedan och andra användare kommer att svara dig
Skruvborrar Makita Manualer
19 Oktober 2024
18 Oktober 2024
16 Oktober 2024
15 Oktober 2024
15 Oktober 2024
14 Oktober 2024
14 Oktober 2024
13 Oktober 2024
13 Oktober 2024
12 Oktober 2024
Skruvborrar Manualer
- Skruvborrar Bosch
- Skruvborrar AEG
- Skruvborrar Ferm
- Skruvborrar Ozito
- Skruvborrar Gude
- Skruvborrar Hitachi
- Skruvborrar Black And Decker
- Skruvborrar Skil
- Skruvborrar Ryobi
- Skruvborrar Festool
- Skruvborrar Worx
- Skruvborrar Meec Tools
- Skruvborrar Hikoki
- Skruvborrar Luxor
- Skruvborrar Maktec
- Skruvborrar Bort
- Skruvborrar Elu
Nyaste Skruvborrar Manualer
21 Oktober 2024
20 Oktober 2024
18 Oktober 2024
18 Oktober 2024
18 Oktober 2024
18 Oktober 2024
18 Oktober 2024
12 Oktober 2024
11 Oktober 2024
11 Oktober 2024