Makita BHR162Z Bruksanvisning

Makita Borrmaskin BHR162Z

Läs nedan 📖 manual på svenska för Makita BHR162Z (16 sidor) i kategorin Borrmaskin. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/16
I N S T R U C T I O N M A N U A L
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ENGLISH
Cordless Rotary
Hammer
MODEL BHR162
007369
2
SPECIFICATIONS
• Due to our continuing programme of research and development, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
END001-1
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
..................Only for EU countries
Do not dispose of electric equipment
together with household waste
material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life
must be collected separately and
returned to an environmentally
compatible recycling facility.
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
For European countries only
Noise and Vibration
The typical A-weighted noise levels are
sound pressure level: 86 dB (A)
sound power level: 97 dB (A)
Uncertainty: 3 dB
– Wear ear protection. –
The typical weighted root mean square acceleration
value is 5.5 m/s2.
These values have been obtained according to EN60745.
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product
is in compliance with the following standards of stan-
dardized documents;
EN60745, EN55014 in accordance with Council Direc-
tives, 89/336/EEC, 98/37/EC.
Yasuhiko Kanzaki CE2006
Director
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND
Responsible manufacturer:
Makita Corporation Anjo Aichi Japan
Model BHR162
Capacities
Concrete 16 mm
Steel 13 mm
Wood 24 mm
No load speed (min-1)0 - 1,500
Blows per minute 0 - 5,000
Overall length 296 mm
Net weight 2.1 kg
Rated voltage D.C. 14.4V
3
GENERAL SAFETY RULES GEA002-3
WARNING:
Read all instructions. Failure to follow all instructions listed below may result in
electric shock, fire and/or serious injury. The term “power tool” in all of the
warnings listed below refers to your mains-operated (corded) power tool or battery-
operated (cordless) power tool.
SAVE THESE INSTRUCTIONS.
Work area safety
1. Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while oper-
ating a power tool. Distractions can cause you to
lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of
electric shock.
Personal safety
9. Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
10. Use safety equipment. Always wear eye protec-
tion. Safety equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used
for appropriate conditions will reduce personal inju-
ries.
11. Avoid accidental starting. Ensure the switch is
in the off-position before plugging in. Carrying
power tools with your finger on the switch or plug-
ging in power tools that have the switch on invites
accidents.
12. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
13. Do not overreach. Keep proper footing and bal-
ance at all times. This enables better control of the
power tool in unexpected situations.
14. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing, and gloves
away from moving parts. Loose clothes, jewellery
or long hair can be caught in moving parts.
15. If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
these devices can reduce dust-related hazards.
Power tool use and care
16. Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the rate
for which it was designed.
17. Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
18. Disconnect the plug from the power source and/
or the battery pack from the power tool before
making any adjustments, changing accessories,
or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool
accidentally.

Produktspecifikationer

Varumärke: Makita
Kategori: Borrmaskin
Modell: BHR162Z

Behöver du hjälp?

Om du behöver hjälp med Makita BHR162Z ställ en fråga nedan och andra användare kommer att svara dig


Borrmaskin Makita Manualer

Makita

Makita HR2631FTX4 Bruksanvisning

8 Januari 2025
Makita

Makita HR4002 Bruksanvisning

23 December 2024
Makita

Makita DDF459 Bruksanvisning

22 December 2024
Makita

Makita HP2070 Bruksanvisning

13 Oktober 2024
Makita

Makita DHR263ZJ Bruksanvisning

12 Oktober 2024
Makita

Makita HP332D Bruksanvisning

8 Oktober 2024
Makita

Makita DDF485RTJ Bruksanvisning

7 Oktober 2024
Makita

Makita DDA350RFJ Bruksanvisning

7 Oktober 2024
Makita

Makita M6501 Bruksanvisning

6 Oktober 2024
Makita

Makita DTL061RMJ Bruksanvisning

4 Oktober 2024

Borrmaskin Manualer

Nyaste Borrmaskin Manualer

Metabo

Metabo PowerMaxx BS 12 BL Bruksanvisning

9 Januari 2025
Holzmann

Holzmann SB 4116HN Bruksanvisning

7 Januari 2025
Bavaria

Bavaria BCD 12/1 Bruksanvisning

7 Januari 2025
Einhell

Einhell BT-ID 710 E Bruksanvisning

7 Januari 2025
DeWalt

DeWalt DCB126 Bruksanvisning

6 Januari 2025
MSW

MSW -DMS400 Bruksanvisning

5 Januari 2025
DeWalt

DeWalt DCD1624 Bruksanvisning

3 Januari 2025
DeWalt

DeWalt DW9106 Bruksanvisning

31 December 2025
Gude

Gude GTB 16/12 R+L Bruksanvisning

31 December 2025
Metabo

Metabo BS 12 BL Q Bruksanvisning

31 December 2025