Makita DLS110Z Bruksanvisning

Makita Sågmaskin DLS110Z

Läs nedan 📖 manual på svenska för Makita DLS110Z (32 sidor) i kategorin Sågmaskin. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/32
INSTRUCTION MANUAL
Cordless Slide Compound
Miter Saw
DLS110
DLS112
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: DLS110 DLS112
Blade diameter European countries 260 mm
Countries other than Europe 255 mm - 260 mm
Hole diameter European countries 30 mm
Countries other than Europe 25.4 mm
Max. kerf thickness of the saw blade 3.2 mm
Max. miter angle Right 60°, Left 60°
Max. bevel angle Right 48°, Left 48°
No load speed (RPM) 4,400 min-1
Laser type -
Red Laser 650 nm, Maximum out-
put 1.6mW ( Laser Class 2M )
Rated voltage D.C. 36 V
Battery cartridge BL1815N, BL1820, BL1820B, BL1830, BL1830B, BL1840,
BL1840B, BL1850, BL1850B, BL1860B
Charger DC18RC, DC18RD, DC18SD, DC18SE, DC18SF
Dimensions (L x W x H) 805 mm x 644 mm x 660 mm
Net weight 26.6 - 27.3 kg
Cutting capacities (H x W)
Miter angle Bevel angle
45° (left) 45° (right)0°
0° 42 mm x 310 mm
58 mm x 279 mm
68 mm x 310 mm
91 mm x 279 mm
29 mm x 310 mm
43 mm x 279 mm
45° (right and left) 42 mm x 218 mm
58 mm x 197 mm
68 mm x 218 mm
91 mm x 197 mm
29 mm x 218 mm
43 mm x 197 mm
60° (right and left) 68 mm x 155 mm-
91 mm x 139 mm
-
Cutting capacities for special cuttings
Type of cutting Cutting capacity
Crown molding 45° type
(with crown molding stopper used)
168 mm
Base board
(with horizontal vise used)
133 mm
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsandbatterycartridgemaydifferfromcountrytocountry.
• Theweightmaydifferdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-
estcombination,accordingtoEPTA-Procedure01/2014,areshowninthetable.
Symbols
Thefollowingshowthesymbolsusedfortheequip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Toavoidinjuryfromyingdebris,keep
holding the saw head down, after making
cuts, until the blade has come to a com-
plete stop.
Whenperformingslidecut,rstpullcar-
riage fully and press down handle, then
push carriage toward the guide fence.
Donotplacehandorngersclosetothe
blade.
Never look into the laser beam. Direct laser
beammayinjureyoureyes.
Only for EU countries
Donotdisposeofelectricequipment
together with household waste material! In
observance of the European Directive, on
WasteElectricandElectronicEquipment
and its implementation in accordance with
nationallaw,electricequipmentthathave
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
3 ENGLISH
Intended use
Thetoolisintendedforaccuratestraightandmitercuttinginwood.
With appropriate saw blades, aluminum can also be sawed.
Noise
ThetypicalA-weightednoiseleveldeterminedaccord-
ing to EN62841:
Model DLS110
Sound pressure level (L
pA):92dB(A)
Sound power level (L
WA):102dB(A)
Uncertainty(K):3dB(A)
Model DLS112
Sound pressure level (L
pA):92dB(A)
Sound power level (L
WA):102dB(A)
Uncertainty(K):3dB(A)
WARNING: Wear ear protection.
Vibration
Thevibrationtotalvalue(tri-axialvectorsum)deter-
mined according to EN62841:
Model DLS110
Vibration emission (a
h):2.5m/s2 or less
Uncertainty(K):1.5m/s
2
Model DLS112
Vibration emission (a
h):2.5m/s2 or less
Uncertainty(K):1.5m/s
2
NOTE:
Thedeclaredvibrationemissionvaluehasbeen
measured in accordance with the standard test method
and may be used for comparing one tool with another.
NOTE:
Thedeclaredvibrationemissionvaluemay
also be used in a preliminary assessment of exposure.
WARNING:
Thevibrationemissionduringactual
use of the power tool can differ from the declared emission
value depending on the ways in which the tool is used.
WARNING: Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
TheECdeclarationofconformityisincludedasAnnexA
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
tions, illustrations and specications provided with this
power tool. Failure to follow all instructions listed below
mayresultinelectricshock,reand/orseriousinjury.
Save all warnings and instruc-
tions for future reference.
Theterm"powertool"inthewarningsreferstoyour
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodiedplugsandmatchingoutletswill
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.Thereisanincreasedriskofelec-
tric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
6. If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
7.
Power tools can produce electromagnetic elds
(EMF) that are not harmful to the user. However,
users of pacemakers and other similar medical
devicesshouldcontactthemakeroftheirdeviceand/
or doctor for advice before operating this power tool.
Personal Safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the inuence of drugs, alcohol or med-
ication.Amomentofinattentionwhileoperating
powertoolsmayresultinseriouspersonalinjury.
2. Use personal protective equipment. Always
wear eye protection.Protectiveequipmentsuch
as a dust mask, non-skid safety shoes, hard hat or
hearing protection used for appropriate conditions
willreducepersonalinjuries.
3. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
yourngerontheswitchorenergisingpowertools
that have the switch on invites accidents.

Produktspecifikationer

Varumärke: Makita
Kategori: Sågmaskin
Modell: DLS110Z

Behöver du hjälp?

Om du behöver hjälp med Makita DLS110Z ställ en fråga nedan och andra användare kommer att svara dig


Sågmaskin Makita Manualer

Makita

Makita DPC6430 Bruksanvisning

1 April 2025
Makita

Makita DCS4610 Bruksanvisning

1 April 2025
Makita

Makita DCS431 Bruksanvisning

1 April 2025
Makita

Makita DCS430 Bruksanvisning

1 April 2025
Makita

Makita EK6101 Bruksanvisning

1 April 2025
Makita

Makita DCS6401 Bruksanvisning

1 April 2025
Makita

Makita DCS340 Bruksanvisning

29 Mars 2025
Makita

Makita DPB181 Bruksanvisning

29 Mars 2025
Makita

Makita DPC7301 Bruksanvisning

29 Mars 2025
Makita

Makita DPC6401 Bruksanvisning

29 Mars 2025

Sågmaskin Manualer

Nyaste Sågmaskin Manualer

Bavaria By Einhell

Bavaria By Einhell BHS 66 Bruksanvisning

3 April 2025
Bavaria By Einhell

Bavaria By Einhell BPS 600 E Bruksanvisning

3 April 2025
Kraftronic

Kraftronic KT-ST 550 Bruksanvisning

29 Mars 2025
Kraftronic

Kraftronic KT-US 650 Bruksanvisning

29 Mars 2025
Kraftronic

Kraftronic KT-HK 1250 Bruksanvisning

29 Mars 2025
Kraftronic

Kraftronic KT-HK 1410 Bruksanvisning

29 Mars 2025
Topex

Topex 16B282 Bruksanvisning

29 Mars 2025
Ribimex

Ribimex PRS499 Bruksanvisning

29 Mars 2025
Stanley

Stanley Fatmax SFMCCS630 Bruksanvisning

29 Mars 2025
Einhell

Einhell BT-SM 3100 Bruksanvisning

28 Mars 2025