Makita DRV250Z Bruksanvisning

Läs nedan 📖 manual på svenska för Makita DRV250Z (12 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/12
INSTRUCTION MANUAL
Cordless Rivet Gun
DRV150
DRV250
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: DRV150 DRV250
Pulling force 10 kN 20 kN
Stroke 25 mm 30 mm
Overall length 313 mm 323 mm
Rated voltage D.C. 18 V
Net weight 1.9 - 2.2 kg 2.1 - 2.4 kg
Due to our continuing program of research and development, the specications herein are subject to change without notice.
Specications may differ from country to country.
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH
Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or re.
Symbols
The followings show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Read instruction manual.
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for installing blind rivet.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841-1:
Model DRV150
Sound pressure level (L
pA) : 75 dB(A)
Uncertainty (K) : 3 dB(A)
Model DRV250
Sound pressure level (L
pA) : 74 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
NOTE:
The declared noise emission value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE:
The declared noise emission value(s) may
also be used in a preliminary assessment of exposure.
WARNING: Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared val-
ue(s) depending on the ways in which the tool is used
especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (tak-
ing account of all parts of the operating cycle such
as the times when the tool is switched off and when
it is running idle in addition to the trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841-1:
Model DRV150
Work mode: Installing blind rivet
Vibration emission (a
h) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s
2
Model DRV250
Work mode: Installing blind rivet
Vibration emission (a
h) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s
2
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
3 ENGLISH
WARNING: The vibration emission during
actual use of the power tool can differ from the
declared value(s) depending on the ways in which
the tool is used especially what kind of workpiece
is processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
tions, illustrations and specications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, re and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodied plugs and matching outlets will
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
6. If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
7. Power tools can produce electromagnetic
elds (EMF) that are not harmful to the user.
However, users of pacemakers and other similar
medical devices should contact the maker of their
device and/or doctor for advice before operating
this power tool.
Personal safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the inuence of drugs, alcohol or med-
ication. A moment of inattention while operating
power tools may result in serious personal injury.
2. Use personal protective equipment. Always
wear eye protection. Protective equipment such
as a dust mask, non-skid safety shoes, hard hat or
hearing protection used for appropriate conditions
will reduce personal injuries.
3. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
your nger on the switch or energising power tools
that have the switch on invites accidents.
4. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
5. Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
6. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away
from moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
7. If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
8. Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action
can cause severe injury within a fraction of a
second.
9. Always wear protective goggles to protect
your eyes from injury when using power tools.
The goggles must comply with ANSI Z87.1 in
the USA, EN 166 in Europe, or AS/NZS 1336
in Australia/New Zealand. In Australia/New
Zealand, it is legally required to wear a face
shield to protect your face, too.

Produktspecifikationer

Varumärke: Makita
Kategori: Inte kategoriserad
Modell: DRV250Z
Färg på produkten: Black, White
Vikt: 2850 g
Bredd: 198 mm
Djup: 198 mm
Höjd: 240 mm
Snäll: IP-beveiligingscamera
Användarmanual: Ja
Husmaterial: Acrylic, Aluminium
Internationell säkerhetskod (IP): IP52
Monteringsverktyg: Ja
Ljudformat som stöds: ADPCM, G.711, G.726, LC-AAC, LPCM, PCM
Vormfaktor: Dome
Autofokus: Ja
Placeringsstöd: Binnen
Anslutningsteknik: Bedraad
Ethernet LAN: Ja
Monteringsmetod: Plafond/muur
Videolägen som stöds: 720p
Maximal upplösning: 1280 x 720 Pixels
Totalt antal megapixlar: - MP
Videokomprimeringsformat: AVC, H.264, H.265, HEVC, M-JPEG, MPEG4
Typ av strömkälla: AC, PoE
Minimal belysning: 0.002 Lux
Antal kameror: 1
Integrerad minneskortläsare: Ja
Kompatibla minneskort: SD, SDHC, SDXC
Video rörelsedetektering: Ja
HTTPS-kryptering: Ja
Ljudsystem: 2-weg
Zoomkapacitet: Ja
Antal Ethernet LAN (RJ-45)-portar: 1
Brännvidd: 4.25 - 127.5 mm
Lösenordsskydd: Ja
Optisk sensorstorlek: 1/2.8 "
Bildsensortyp: CMOS
Digital zoom: 12 x
Optisk zoom: 30 x
Kamerans slutartid: 1/11000 - 1/3 s
Internminne: 1024 MB
Grafikupplösningar som stöds: 320 x 180,1280 x 720 (HD 720)
Nätverksstandard: IEEE 802.1x, IEEE 802.3at
Förvaringstemperatur: -40 - 65 °C
Max 30 bilder per sekund: 60 fps
Nätverksprotokoll som stöds: IPv4, IPv6 USGv6, HTTP, HTTPS, SSL/TLS, QoS Layer 3 DiffServ, FTP, SFTP, CIFS/SMB, SMTP, Bonjour, UPnP , SNMP v1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, SRTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS, SSH, NTCIP, LLDP
Förvaringsfuktighet: 10 - 85 procent
IP-adressfilter: Ja
Progressiv skanning: Ja
Flashminne: 512 MB
Ethernet-gränssnittstyp: Fast Ethernet
Språk som stöds: CHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, ITA, JPN, KOR, POR, RUS
Quality of Service (QoS): Ja
Samplingshastighet: 48 kHz
PTZ-kontroll: Ja
Panoreringsintervall: 0 - 360 °
Dag/nattläge: Ja
Antal linser: 1
Maximalt antal bländare: 4.2
Minsta bländartal: 1.6
Styr kamerapanorering: Ja
Kameralutningsfunktion: Ja
Svänghastighet: 450 °/sec
Pannhastighet: 450 °/sec
Strömningsmetod: Multicast
Antal sensorer: 1
Videostreaming: Ja
Infrarött (IR) termineringsfilter: Ja
Bakgrundsljuskompensation: Ja
Förinställda punkter: Ja
Antal språk: 11
Bithastighetskontroll: Variabele bitsnelheid (VBR)
Justering av bildkvalitet: Brightness, Colour depth, Sharpness
Strömförbrukning (strömförsörjning via Ethernet (PoE)): 17.1 W
Wide Dynamic Range (WDR): Ja
Turnéinspelning: Ja
AC-ingångsspänning: 100-240 V
Strömförbrukning (typiskt): 11 W
Drifttemperatur (TT): 0 - 50 °C
Relativ luftfuktighet i drift (VV): 10 - 85 procent
Tiltvinkelområde: 0 - 180 °
Harmoniserad systemkod (HS): 85258900
Mask privat zon: Ja
Systemfunktioner intelligent videoövervakning (IVS): Missing object, Tripwire
Skitbeständig: Ja
Linsens betraktningsvinkel, horisontell: 63.8 °
Typ av varningsmeddelande: E-mail
Linsens betraktningsvinkel, vertikal: 38 °
Textoverlay: Ja

Behöver du hjälp?

Om du behöver hjälp med Makita DRV250Z ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Makita Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer