Makita DTL061RMJ Bruksanvisning
Makita
Borrmaskin
DTL061RMJ
Läs nedan 📖 manual på svenska för Makita DTL061RMJ (12 sidor) i kategorin Borrmaskin. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/12
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
IMPORTANT: Read Before Using.
Cordless Angle Impact Driver
BTL060
BTL061
008328
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model BTL060 BTL061
Machine screw 4 mm - 8 mm
Capacities Bolt 4 mm - 12 mm
No load speed (min
-1) 0 - 2,000
Impacts per minute 0 - 3,000
Max. fastening torque 60 N•m
Overall length 387 mm
Net weight 1.7 kg 1.5 kg
Rated voltage D.C. 14.4 V D.C. 18 V
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
END004-4
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Read instruction manual.
･ Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
ENE033-1
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA) : 91 dB(A)
Sound power level (L
WA) : 102 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model BTL060
Work mode : impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (ah) : 9.5 m/s2
Uncertainty (K) : 1.5 m/s2
Model BTL061
Work mode : impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (ah) : 17.5 m/s2
Uncertainty (K) : 1.5 m/s2
ENG901-1
• The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
Cd
Ni-MH
Li-ion
3
ENH101-15
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Cordless Angle Impact Driver
Model No./ Type: BTL060,BTL061
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd.
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
30.1.2009
000230
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
GEA006-2
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
9. If operating a power tool in a damp location is
unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of an
GFCI reduces the risk of electric shock.
Personal safety
10. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or
medication. A moment of inattention while
operating power tools may result in serious
personal injury.
11. Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
12. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
your finger on the switch or energising power tools
that have the switch on invites accidents.
13. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
14. Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
Produktspecifikationer
| Varumärke: | Makita |
| Kategori: | Borrmaskin |
| Modell: | DTL061RMJ |
Behöver du hjälp?
Om du behöver hjälp med Makita DTL061RMJ ställ en fråga nedan och andra användare kommer att svara dig
Borrmaskin Makita Manualer
13 Oktober 2024
12 Oktober 2024
8 Oktober 2024
7 Oktober 2024
7 Oktober 2024
6 Oktober 2024
4 Oktober 2024
2 Oktober 2024
1 Oktober 2024
30 September 2024
Borrmaskin Manualer
- Borrmaskin Bosch
- Borrmaskin AEG
- Borrmaskin IKEA
- Borrmaskin DeWalt
- Borrmaskin Silverline
- Borrmaskin Ferm
- Borrmaskin Workzone
- Borrmaskin Ozito
- Borrmaskin Gude
- Borrmaskin Tryton
- Borrmaskin Hitachi
- Borrmaskin Black And Decker
- Borrmaskin Vonroc
- Borrmaskin Maestro
- Borrmaskin Stanley
- Borrmaskin Skil
- Borrmaskin Yato
- Borrmaskin Hilti
- Borrmaskin Ryobi
- Borrmaskin Festool
- Borrmaskin Metabo
- Borrmaskin Parkside
- Borrmaskin Worx
- Borrmaskin Meec Tools
- Borrmaskin Milwaukee
- Borrmaskin Hikoki
- Borrmaskin Sun Joe
- Borrmaskin Hazet
- Borrmaskin Einhell
- Borrmaskin Baumr-AG
- Borrmaskin Velleman
- Borrmaskin Maktec
- Borrmaskin Bort
- Borrmaskin Craftsman
- Borrmaskin Power Craft
- Borrmaskin Powerplus
- Borrmaskin Porter-Cable
- Borrmaskin Genesis
- Borrmaskin Eibenstock
- Borrmaskin Topcraft
- Borrmaskin Scheppach
- Borrmaskin Gamma
- Borrmaskin Clas Ohlson
- Borrmaskin Powerfix
- Borrmaskin Carat
- Borrmaskin Kress
- Borrmaskin Bavaria
- Borrmaskin Flex
- Borrmaskin Duro
- Borrmaskin Kawasaki
- Borrmaskin Berner
- Borrmaskin Mafell
- Borrmaskin Fieldmann
- Borrmaskin Varo
- Borrmaskin Truper
- Borrmaskin Kinzo
- Borrmaskin Bruder Mannesmann
- Borrmaskin Cocraft
- Borrmaskin Powerblade
- Borrmaskin Meister Craft
- Borrmaskin Toolcraft
- Borrmaskin RIDGID
- Borrmaskin Rupes
- Borrmaskin Batavia
- Borrmaskin Proxxon
- Borrmaskin Protool
- Borrmaskin Westfalia
- Borrmaskin Economy
- Borrmaskin Holzmann
- Borrmaskin Fein
- Borrmaskin Huvema
- Borrmaskin Stomer
- Borrmaskin Fe Powertools
- Borrmaskin Elu
- Borrmaskin Max Bahr
- Borrmaskin Lux Tools
- Borrmaskin Goon
- Borrmaskin Wolfcraft
- Borrmaskin Dedra
- Borrmaskin Kreg
- Borrmaskin Sthor
- Borrmaskin Spit
- Borrmaskin Global
- Borrmaskin Rok
- Borrmaskin Profitech
- Borrmaskin Graphite
- Borrmaskin Narex
- Borrmaskin Rikon
- Borrmaskin Duro Pro
- Borrmaskin Baier
- Borrmaskin Alpha Tools
- Borrmaskin Felisatti
- Borrmaskin MSW
- Borrmaskin Ribimex
- Borrmaskin Robust
- Borrmaskin Einhell Bavaria
- Borrmaskin Ergotools Pattfield
- Borrmaskin MyTool
- Borrmaskin McKenzie
- Borrmaskin G-Technology
- Borrmaskin Rodcraft
- Borrmaskin Bavaria By Einhell
- Borrmaskin Handwerk
- Borrmaskin Stalco
Nyaste Borrmaskin Manualer
27 Oktober 2024
24 Oktober 2024
23 Oktober 2024
21 Oktober 2024
20 Oktober 2024
19 Oktober 2024
19 Oktober 2024
18 Oktober 2024
16 Oktober 2024
16 Oktober 2024