Makita DUM604RTX Bruksanvisning

Läs nedan 📖 manual på svenska för Makita DUM604RTX (20 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/20
INSTRUCTION MANUAL
Cordless Grass Shear
DUM604
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: DUM604
Cutting width 160 mm
Strokes per minute 2,500 min-1
Dimensions
(L x W x H)
353 mm x 177 mm x 131 mm
Rated voltage D.C. 18 V
Battery cartridge BL1815 / BL1815N / BL1820 / BL1820B / BL1830 / BL1830B /
BL1840 / BL1840B / BL1850 / BL1850B / BL1860B
Net weight 1.4 - 1.8 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsandbatterycartridgemaydifferfromcountrytocountry.
• Weight,withbatterycartridge,accordingtoEPTA-Procedure01/2003
Symbols
Thefollowingshowthesymbolsusedfortheequip-
ment. Be sure that you understand their meaning before
use.
Takeparticularcareandattention.
Read instruction manual.
Danger;beawareofthrownobjects.
Keep bystanders away.
Cutting means continues to run after the
motor is switched off.
Do not expose to moisture.
Cd
Ni-MH
Li-ion
OnlyforEUcountries
Donotdisposeofelectricequipmentorbattery
pack together with household waste material!
InobservanceoftheEuropeanDirectives,
onWasteElectricandElectronic
EquipmentandBatteriesandAccumulators
andWasteBatteriesandAccumulators
and their implementation in accordance
withnationallaws,electricequipmentand
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
Thetoolisintendedforcuttinglawnedgesorsprouts.
Noise
ThetypicalA-weightednoiseleveldeterminedaccord-
ingtoEN50636:
DUM604 with shear blade for grass shear installed
Sound pressure level (LpA ):76dB(A)
Uncertainty(K):0.98dB(A)
Thenoiselevelunderworkingmayexceed80dB(A).
WARNING: Wear ear protection.
ThetypicalA-weightednoiseleveldeterminedaccord-
ingtoEN60745:
DUM604 with shear blade for hedge trimmer installed
Sound pressure level (L
pA):74dB(A)
Uncertainty(K):3dB(A)
Thenoiselevelunderworkingmayexceed80dB(A).
WARNING: Wear ear protection.
Vibration
Thevibrationtotalvalue(tri-axialvectorsum)deter-
minedaccordingtoEN50636:
DUM604 with shear blade for grass shear installed
Vibration emission (a
h):2.5m/s2 or less
Uncertainty(K):1.5m/s
2
Thevibrationtotalvalue(tri-axialvectorsum)deter-
minedaccordingtoEN60745:
DUM604 with shear blade for hedge trimmer installed
Vibration emission (a
h):2.5m/s2 or less
Uncertainty(K):1.5m/s
2
NOTE:
Thedeclaredvibrationemissionvaluehasbeen
measured in accordance with the standard test method
and may be used for comparing one tool with another.
NOTE:
Thedeclaredvibrationemissionvaluemay
also be used in a preliminary assessment of exposure.
WARNING:
Thevibrationemissionduringactual
use of the power tool can differ from the declared emission
value depending on the ways in which the tool is used.
WARNING:
Be sure to identify safety measures to pro-
tect the operator that are based on an estimation of exposure
in the actual conditions of use (taking account of all parts of the
operating cycle such as the times when the tool is switched off
and when it is running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
TheECdeclarationofconformityisincludedasAnnexA
to this instruction manual.
3 ENGLISH
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings and all
instructions. Failure to follow the warnings and instruc-
tionsmayresultinelectricshock,reand/orseriousinjury.
Save all warnings and instruc-
tions for future reference.
Theterm"powertool"inthewarningsreferstoyour
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust.Powertoolscreatesparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodiedplugsandmatchingoutletswill
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.Thereisanincreasedriskofelec-
tric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use.Useof
a cord suitable for outdoor use reduces the risk of
electric shock.
6. If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply.UseofanRCDreduces
the risk of electric shock.
Personal Safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the inuence of drugs, alcohol or med-
ication.Amomentofinattentionwhileoperating
powertoolsmayresultinseriouspersonalinjury.
2. Use personal protective equipment. Always
wear eye protection.Protectiveequipmentsuch
as a dust mask, non-skid safety shoes, hard hat or
hearing protection used for appropriate conditions
willreducepersonalinjuries.
3. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
yourngerontheswitchorenergisingpowertools
that have the switch on invites accidents.
4.
Remove any adjusting key or wrench before turning
the power tool on.Awrenchorakeyleftattachedtoa
rotatingpartofthepowertoolmayresultinpersonalinjury.
5. Do not overreach. Keep proper footing and
balance at all times.Thisenablesbettercontrol
of the power tool in unexpected situations.
6. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing, and gloves
away from moving parts.Looseclothes,jewel-
lery or long hair can be caught in moving parts.
7. If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used.Useof
dust collection can reduce dust-related hazards.
Power tool use and care
1. Do not force the power tool. Use the correct
power tool for your application.Thecorrect
powertoolwilldothejobbetterandsaferatthe
rate for which it was designed.
2.
Do not use the power tool if the switch does not turn
it on and off.Anypowertoolthatcannotbecontrolled
with the switch is dangerous and must be repaired.
3.
Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
4.
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool.Power
tools are dangerous in the hands of untrained users.
5. Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tools operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
6. Keep cutting tools sharp and clean.Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
7.
Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed.Useofthepowertoolforoperationsdifferent
from those intended could result in a hazardous situation.
Battery tool use and care
1. Recharge only with the charger specied by
the manufacturer.Achargerthatissuitablefor
onetypeofbatterypackmaycreateariskofre
when used with another battery pack.
2. Use power tools only with specically desig-
nated battery packs.Useofanyotherbattery
packsmaycreateariskofinjuryandre.
3.
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a
connection from one terminal to another. Shorting the
batteryterminalstogethermaycauseburnsorare.

Produktspecifikationer

Varumärke: Makita
Kategori: Inte kategoriserad
Modell: DUM604RTX
Färg på produkten: Zwart, zilver
Vikt: 1750 g
Bredd: 340 mm
Djup: 235.8 mm
Höjd: 19.8 mm
Användarmanual: Ja
Batterikapacitet: 3550 mAh
Blåtand: Ja
Skärm diagonal: 14 "
Upplösning: 1366 x 768 Pixels
Pekskärm: Nee
Original bildförhållande: 16:9
Processorfrekvens: 1.8 GHz
Processorfamilj: Intel® Core™ i3
Processormodel: i3-3217U
Antal processorkärnor: 2
Wi-Fi-standarder: 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Vormfaktor: Clamshell
Inkluderar operativsystem: Windows 7 Home Basic
Typ av anslutningskontakt: 3,5 mm
Ethernet LAN: Ja
Integrerad minneskortläsare: Ja
Kompatibla minneskort: MMC, SD, SDHC, SDXC
Ljudsystem: Beats Audio
Ljusstyrka: 200 cd/m²
Processor litografi: 22 nm
Inkluderar AC-adapter: Ja
Ursprungsland: China
LED-bakgrundsbelysning: Ja
Antal USB 2.0-portar: 1
Antal HDMI-portar: 1
Mikrofon, linjeingång: Ja
DVI-port: Nee
Antal Ethernet LAN (RJ-45)-portar: 1
Monteringsalternativ för kabellås: Nee
Antal inbyggda högtalare: 2
Hörlursutgångar: 1
AC-adapter, ström: 65 W
HD typ: HD
Inbyggd mikrofon: Ja
Internminne: 4 GB
Förvarings media: HDD
Batteritid/batteritid: - uur
Internminnestyp: DDR3-SDRAM
Hållbarhetscertifikat: EPEAT Silver, ENERGY STAR
Inbyggd subwoofer: Ja
Ethernet LAN, dataöverföringshastigheter: 10,100,1000 Mbit/s
Kabelteknik: 10/100/1000Base-T(X)
Förvaringstemperatur: -20 - 60 °C
Intel® Wireless Display (Intel® WiDi): Ja
Antal portar USB 3.2 Gen 1 (3.1 Gen 1) Typ A: 2
Processoruttag: BGA 1023
Stepping: L1
Systembuss: 5 GT/s
Processor antal trådar: 4
PCI Express-kortplatsversion: 2.0
Processorns driftlägen: 64-bit
Processorns cache: 3 MB
Tjunction: 105 °C
Busstyp: DMI
PCI Express-konfigurationer: 1x16, 2x8, 1x8+2x4
Thermal Design Power (TDP): 17 W
Kodnamnsprocessor: Ivy Bridge
Maximalt antal PCI Express-linjer: 16
Typ av processorcache: Smart Cache
ECC stöds av processor: Nee
Processorfabrikant: Intel
Operativsystems arkitektur: 64-bit
Maximalt internminne: 8 GB
Total lagringskapacitet: 500 GB
Typ av optisk enhet: Nee
Inbyggd grafikadapter: Ja
Separat grafikadapter: Ja
Familjens inbyggda grafikadapter: Intel® HD Graphics
Inbyggd grafikadaptermodell: Intel® HD Graphics 4000
Grundläggande frekvens inbyggd grafikadapter: 350 MHz
Inbyggd grafikadapter dynamisk frekvens (max): 1050 MHz
Inbyggt grafikkort-ID: 0x166
Numerisk knappsats: Nee
Instruktionsuppsättningar som stöds: AVX
Intel® My WiFi Technology (Intel® MWT): Ja
Intel® Hyper Threading Technology (Intel® HT Technology): Ja
Intel® Turbo Boost-teknik: Nee
Intel® Quick Sync-videoteknik: Ja
Intel® InTru™ 3D-teknik: Ja
Intel® Clear Video HD-teknik (Intel® CVT HD): Ja
Intel® Insider™: Ja
Intel® Flex Memory Access: Ja
Intel® AES nya instruktioner (Intel® AES-NI): Nee
Förbättrad Intel SpeedStep-teknik: Ja
Kör Disable Bit: Ja
Idle stater: Ja
Termisk övervakningsteknik: Ja
CPU-konfiguration (max): 1
Intel® Enhanced Halt State: Ja
Intel® Clear Video Technology för mobila internetenheter (Intel® CVT för MID): Nee
Intel® VT-x med utökade sidtabeller (EPT): Ja
Inbyggda alternativ tillgängliga: Nee
Grafik & IMC litografi: 22 nm
Intel® Small Business Advantage (Intel® SBA): Nee
Intel® 64: Ja
Intel® Virtualization Technology for Directed I/O (VT-d): Nee
Intel® Clear Video-teknik: Nee
Intel® Virtualization Technology (VT-x): Ja
Processorpaketstorlek: 31 x 24 mm
Konfliktfri processor: Ja
Intel® Identity Protection Technology (Intel® IPT): Ja
Versie Intel® Identity Protection Technology: 1.00
ARK ID-processor: 65697
Intel® Trusted Execution Technology: Nee
Intel® Anti-Theft Technology (Intel® AT): Ja
Anslutning till basstation: Nee
SmartCard-kortplats: Nee
Förvaringsfuktighet: 5 - 95 procent
Processorkod: SR0N9
Diskret grafikadaptermodell: AMD Radeon HD 7670M
Klockhastighetsminne: 1600 MHz
Minnesplatser: 2x SO-DIMM
Bildområde: Glans
Tangentbord i full storlek: Ja
Keyboard i ö-stil: Ja
Chipset moderkort: Intel HM77 Express
Höjd, drift: -15 - 3048 m
Höjd vid förvaring: -15 - 12192 m
Specifik grafikminnestyp: GDDR3
Grafikminne: 2 GB
Antalet installerade hårddiskar: 1
HDD kapacitet: 500 GB
HDD-gränssnitt: SATA
HDD rotationshastighet: 5400 RPM
CPU-multiplikator (bus/kärnförhållande): 18
FSB-paritet: Nee
Bussprocessor på framsidan: - MHz
Intel® efterfrågebaserad växling: Nee
Typ av laddningsport: DC-in ingang
Typ CardBus PCMCIA-slot: Nee
Processorserie: Intel Core i3-3200 Mobile Series
ExpressCard-kortplats: Nee
S/PDIF-utgång: Nee
Intel® Dual Display Capable Technology: Ja
Intel® FDI-teknik: Ja
Intel® Rapid Storage Technology: Nee
Intel® Fast Memory Access: Ja
Intel® Smart Cache: Ja
Videoinspelningshastighet: 30 fps
Främre kameraupplösning: 1280 x 720 Pixels
LightScribe: Nee
Microfoonaansluiting: 3,5 mm
Wifi: Ja
Drifttemperatur (TT): 5 - 35 °C
Relativ luftfuktighet i drift (VV): 10 - 90 procent
Typ produkt: Notebook
Batteriteknik: Lithium-Polymeer (LiPo)
Antal battericeller: 4
Integrerad 4G WiMAX: Ja
Processorgenerering: Derde generatie Intel® Core™ i3
Batterijcapaciteit: 52 Wh

Behöver du hjälp?

Om du behöver hjälp med Makita DUM604RTX ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Makita Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer