Makita DUR191LRT8 Bruksanvisning

Läs nedan 📖 manual på svenska för Makita DUR191LRT8 (24 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/24
INSTRUCTION MANUAL
Cordless Grass Trimmer
DUR190U
DUR190L
DUR191U
DUR191L
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: DUR190U DUR190L DUR191U DUR191L
Type of handle Bike handle Loop handle Bike handle Loop handle
No load speed 3: 6,000 min-1
2: 5,100 min-1
1: 3,500 min-1
Overall length
(without cutting tool)
1,775 mm
Nylon cord diameter 2.0 - 2.4 mm
Applicable cutting tool and
cutting diameter
3-tooth blade
(P/N 191J34-5)
230 mm
4-tooth blade
(P/N 729025-2)
230 mm
Nylon cutting head
(P/N 126674-0)
300 mm
Plastic blade
(P/N 126642-3)
230 mm
Rated voltage D.C. 18 V
Net weight 3.1 - 3.4 kg 2.9 - 3.2 kg 3.4 - 3.7 kg 3.2 - 3.5 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydierfromcountrytocountry.
• Theweightmaydierdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
andchargersmaycauseinjuryand/orre.
Recommended battery adapter
Battery adapter PDC01
The battery adapter(s) listed above may not be available depending on your region of residence.
Before using the battery adapter, read instruction and cautionary markings on the battery adapter.
Noise
Model DUR190U
Cutting tool
Sound pressure level (L
pA)
dB(A)
Sound power level (LWA)
dB(A)
Applicable
standard
LpA dB(A) Uncer-
tainty (K)
dB(A)
L
WA dB(A) Uncer-
tainty (K)
dB(A)
4-tooth blade 77.0 3.9 91.6 2.4
ISO22868
(ISO11806-1)
Nylon cutting head 74.0 1.9 87.1 0.9
ISO22868
(ISO11806-1)/
EN50636-2-91
Plastic blade 75.6 1.3 85.9 2.1
ISO22868
(ISO11806-1)/
EN50636-2-91
3 ENGLISH
Model DUR190L
Cutting tool
Sound pressure level (L
pA)
dB(A)
Sound power level (LWA)
dB(A)
Applicable
standard
LpA dB(A) Uncer-
tainty (K)
dB(A)
LWA dB(A) Uncer-
tainty (K)
dB(A)
4-tooth blade 77.0 3.9 91.6 2.4
ISO22868
(ISO11806-1)
Nylon cutting head 74.0 1.9 87.1 0.9
ISO22868
(ISO11806-1)/
EN50636-2-91
Plastic blade 75.6 1.3 85.9 2.1
ISO22868
(ISO11806-1)/
EN50636-2-91
Model DUR191U
Cutting tool
Sound pressure level (L
pA)
dB(A)
Sound power level (LWA)
dB(A)
Applicable
standard
LpA dB(A) Uncer-
tainty (K)
dB(A)
LWA dB(A) Uncer-
tainty (K)
dB(A)
4-tooth blade 77.0 3.9 91.6 2.4
ISO22868
(ISO11806-1)
Nylon cutting head 74.0 1.9 87.1 0.9
ISO22868
(ISO11806-1)/
EN50636-2-91
Plastic blade 75.6 1.3 85.9 2.1
ISO22868
(ISO11806-1)/
EN50636-2-91
Model DUR191L
Cutting tool
Sound pressure level (L
pA)
dB(A)
Sound power level (LWA)
dB(A)
Applicable
standard
LpA dB(A) Uncer-
tainty (K)
dB(A)
LWA dB(A) Uncer-
tainty (K)
dB(A)
4-tooth blade 77.0 3.9 91.6 2.4
ISO22868
(ISO11806-1)
Nylon cutting head 74.0 1.9 87.1 0.9
ISO22868
(ISO11806-1)/
EN50636-2-91
Plastic blade 75.6 1.3 85.9 2.1
ISO22868
(ISO11806-1)/
EN50636-2-91
Even if the sound pressure level listed above is 80 dB (A) or less, the level under working may exceed 80 dB
(A). Wear ear protection.
NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual use of the power tool can dier from the declared val-
ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched o and when it is running idle in addition to the trigger time).
4 ENGLISH
Vibration
Model DUR190U
Cutting tool Left hand Right hand Applicable
standard
ah,W (m/s2)
Uncertainty K
(m/s2)
ah,W (m/s2)
Uncertainty K
(m/s2)
4-tooth blade 2.5 1.5 2.5 1.5
ISO22867
(ISO11806-1)
Nylon cutting head 2.5 1.5 2.5 1.5
ISO22867
(ISO11806-1)
Plastic blade 2.5 1.5 2.5 1.5
ISO22867
(ISO11806-1)
Model DUR190L
Cutting tool Left hand Right hand Applicable
standard
ah,W (m/s2)
Uncertainty K
(m/s2)
ah,W (m/s2)
Uncertainty K
(m/s2)
4-tooth blade 2.5 1.5 2.5 1.5
ISO22867
(ISO11806-1)
Nylon cutting head 2.5 1.5 2.5 1.5
ISO22867
(ISO11806-1)
Plastic blade 2.5 1.5 2.5 1.5
ISO22867
(ISO11806-1)
Model DUR191U
Cutting tool Left hand Right hand Applicable
standard
ah,W (m/s2)
Uncertainty K
(m/s2)
ah,W (m/s2)
Uncertainty K
(m/s2)
4-tooth blade 2.5 1.5 2.5 1.5
ISO22867
(ISO11806-1)
Nylon cutting head 2.5 1.5 2.5 1.5
ISO22867
(ISO11806-1)
Plastic blade 2.5 1.5 2.5 1.5
ISO22867
(ISO11806-1)
Model DUR191L
Cutting tool Left hand Right hand Applicable
standard
ah,W (m/s2)
Uncertainty K
(m/s2)
ah,W (m/s2)
Uncertainty K
(m/s2)
4-tooth blade 2.5 1.5 2.5 1.5
ISO22867
(ISO11806-1)
Nylon cutting head 2.5 1.5 2.5 1.5
ISO22867
(ISO11806-1)
Plastic blade 2.5 1.5 2.5 1.5
ISO22867
(ISO11806-1)
NOTE: The declared vibration total value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also be used in a preliminary assessment of exposure.
WARNING: The vibration emission during actual use of the power tool can dier from the declared
value(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched o and when it is running idle in addition to the trigger time).
5 ENGLISH
Symbols
The followings show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Take particular care and attention.
Read instruction manual.
15m(50 )FT Keep distance at least 15 m.
Danger;beawareofthrownobjects.
Caution; kickback
Wear a helmet, goggles and ear protection.
Wear protective gloves.
Wear sturdy boots with nonslip soles.
Steeltoed safety boots are recommended.
Do not expose to moisture.
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household waste
material! In observance of the European
Directives, on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
tions, illustrations and specications provided
with this power tool. Failure to follow all instructions
listedbelowmayresultinelectricshock,reand/or
seriousinjury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodiedplugsandmatchingoutletswill
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
6. If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
7. Power tools can produce electromagnetic
elds (EMF) that are not harmful to the user.
However, users of pacemakers and other similar
medical devices should contact the maker of their
device and/or doctor for advice before operating
this power tool.
Personal safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the inuence of drugs, alcohol or med-
ication. A moment of inattention while operating
powertoolsmayresultinseriouspersonalinjury.
2. Use personal protective equipment. Always
wear eye protection. Protective equipment such
as a dust mask, non-skid safety shoes, hard hat or
hearing protection used for appropriate conditions
willreducepersonalinjuries.
3. Prevent unintentional starting. Ensure the
switch is in the o-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
yourngerontheswitchorenergisingpowertools
that have the switch on invites accidents.
4. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
resultinpersonalinjury.

Produktspecifikationer

Varumärke: Makita
Kategori: Inte kategoriserad
Modell: DUR191LRT8
Färg på produkten: Zwart
Vikt: 1150 g
Anslutningsteknik: Bedraad
Mått (B x D x H): 253 x 100 x 66 mm
Antal portar: 4
Tangentbordsanslutning: USB
Musanslutning: USB

Behöver du hjälp?

Om du behöver hjälp med Makita DUR191LRT8 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Makita Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer