Makita HP2050H Bruksanvisning

Makita Borrmaskin HP2050H

Läs nedan 📖 manual på svenska för Makita HP2050H (28 sidor) i kategorin Borrmaskin. Denna guide var användbar för 15 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/28
1
INSTRUCTION MANUAL
MANUEL D'INSTRUCTION
MANUAL DE INSTRUCCIONES
DOUBLE INSULATION
DOUBLE ISOLATION
DOBLE AISLAMIENTO
IMPORTANT: Read Before Using.
IMPORTANT: Lire avant usage.
IMPORTANTE: Leer antes de usar.
2-Speed Hammer Drill
2 Vitesses Perceuse à Percussion
2 Velocidad Taladro de Percusión
HP2050
HP2050F
HP2051F
002989
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model HP2050/2050F HP2051F
Speed High Low High Low
Concrete 20 mm (3/4") ----- 20 mm (3/4") -----
Steel 8 mm (5/16") 13 mm (1/2") 8 mm (5/16") 13 mm (1/2")
Capacities
Wood 25 mm (1") 40 mm (1-9/16") 25 mm (1") 40 mm (1-9/16")
No load speed (RPM) 0 - 2,900/min 0 - 1,200/min 0 - 2,900/min 0 - 1,200/min
Blows per minute 0 - 58,000 0 - 24,000 0 - 58,000 0 - 24,000
Overall length 362 mm (14-1/4") 360 mm (14-1/8")
Net weight 2.5 kg (5.6 lbs) 2.5 kg (5.6 lbs)
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
GEA008-2
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the risk
of electric shock.
9. If operating a power tool in a damp location is
unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of an
GFCI reduces the risk of electric shock.
Personal Safety
10. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or
medication. A moment of inattention while
operating power tools may result in serious
personal injury.
11. Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
12. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. . Carrying power tools
with your finger on the switch or energising power
tools that have the switch on invites accidents.
13. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key
left attached to a rotating part of the power tool
may result in personal injury.
3
14. Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
15. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing, and gloves
away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving
parts.
16.
If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used.
Use of
dust collection can reduce dust-related hazards.
Power tool use and care
17. Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
18. Do not use the power tool if the switch does
not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous
and must be repaired.
19. Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
20. Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are
dangerous in the hands of untrained users.
21.
Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool’s operation. If damaged, have the
power tool repaired before use.
Many accidents
are caused by poorly maintained power tools.
22. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
23. Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the
power tool for operations different from those
intended could result in a hazardous situation.
Service
24. Have your power tool serviced by a qualified
repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
25. Follow instruction for lubricating and
changing accessories.
26. Keep handles dry, clean and free from oil and
grease.
USE PROPER EXTENSION CORD. Make sure your
extension cord is in good condition. When using an
extension cord, be sure to use one heavy enough to
carry the current your product will draw. An undersized
cord will cause a drop in line voltage resulting in loss of
power and overheating. Table 1 shows the correct size
to use depending on cord length and nameplate ampere
rating. If in doubt, use the next heavier gage. The
smaller the gage number, the heavier the cord.
Table 1: Minimum gage for cord
Ampere Rating
Volts Total length of cord in feet
More Than Not More Than
120V 25 ft. 50 ft. 100 ft. 150 ft.
AWG
0 6
6
10
12
10
12
16
18
18
16
14
16 16 14
1416
16
12
14
12
12
Not Recommended
220V - 240V 50 ft. 100 ft. 200 ft. 300 ft.
000300

Produktspecifikationer

Varumärke: Makita
Kategori: Borrmaskin
Modell: HP2050H

Behöver du hjälp?

Om du behöver hjälp med Makita HP2050H ställ en fråga nedan och andra användare kommer att svara dig


Borrmaskin Makita Manualer

Makita

Makita HR2631FTX4 Bruksanvisning

8 Januari 2025
Makita

Makita HR4002 Bruksanvisning

23 December 2024
Makita

Makita DDF459 Bruksanvisning

22 December 2024
Makita

Makita HP2070 Bruksanvisning

13 Oktober 2024
Makita

Makita DHR263ZJ Bruksanvisning

12 Oktober 2024
Makita

Makita HP332D Bruksanvisning

8 Oktober 2024
Makita

Makita DDF485RTJ Bruksanvisning

7 Oktober 2024
Makita

Makita DDA350RFJ Bruksanvisning

7 Oktober 2024
Makita

Makita M6501 Bruksanvisning

6 Oktober 2024
Makita

Makita DTL061RMJ Bruksanvisning

4 Oktober 2024

Borrmaskin Manualer

Nyaste Borrmaskin Manualer

Metabo

Metabo PowerMaxx BS 12 BL Bruksanvisning

9 Januari 2025
Holzmann

Holzmann SB 4116HN Bruksanvisning

7 Januari 2025
Bavaria

Bavaria BCD 12/1 Bruksanvisning

7 Januari 2025
Einhell

Einhell BT-ID 710 E Bruksanvisning

7 Januari 2025
DeWalt

DeWalt DCB126 Bruksanvisning

6 Januari 2025
MSW

MSW -DMS400 Bruksanvisning

5 Januari 2025
DeWalt

DeWalt DCD1624 Bruksanvisning

3 Januari 2025
DeWalt

DeWalt DW9106 Bruksanvisning

31 December 2025
Gude

Gude GTB 16/12 R+L Bruksanvisning

31 December 2025
Metabo

Metabo BS 12 BL Q Bruksanvisning

31 December 2025