Makita HR1840 Bruksanvisning

Makita Borrmaskin HR1840

Läs nedan 📖 manual på svenska för Makita HR1840 (12 sidor) i kategorin Borrmaskin. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/12
INSTRUCTION MANUAL
Rotary Hammer
HR1840
HR1841F
ENGLISH: Original instructions
DOUBLE INSULATION
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: HR1840 HR1841F
Capacities Concrete 18 mm
Core bit 35 mm
Diamond core bit (dry type) 65 mm
Steel 13 mm
Wood 24 mm
No load speed 0 - 2,100 min-1
Blows per minute 0 - 4,800 min-1
Overall length 285 mm
Net weight 2.0 - 2.4 kg 2.0 - 2.5 kg
Safety class /II
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydifferfromcountrytocountry.
• Theweightmaydifferdependingontheattachment(s).Thelightestandheaviestcombination,accordingto
EPTA-Procedure 01/2014, are shown in the table.
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
DOUBLE INSULATION
Only for EU countries
Do not dispose of electric equipment
together with household waste material! In
observance of the European Directive, on
Waste Electric and Electronic Equipment
and its implementation in accordance with
national law, electric equipment that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745:
Model HR1840
Sound pressure level (L
pA) : 87 dB(A)
Sound power level (L
WA) : 98 dB (A)
Uncertainty (K) : 3 dB(A)
Model HR1841F
Sound pressure level (L
pA) : 87 dB(A)
Sound power level (L
WA) : 98 dB (A)
Uncertainty (K) : 3 dB(A)
WARNING: Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745:
Model HR1840
Work mode: hammer drilling into concrete
Vibration emission (a
h, HD): 10.0 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: drilling into metal
Vibration emission (a
h,D) : 3.0 m/s2
Uncertainty (K) : 1.5 m/s2
Model HR1841F
Work mode: hammer drilling into concrete
Vibration emission (a
h, HD): 7.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: drilling into metal
Vibration emission (a
h,D) : 3.0 m/s2
Uncertainty (K) : 1.5 m/s2
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE: The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
3 ENGLISH
WARNING: The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING: Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings and
all instructions. Failure to follow the warnings and
instructionsmayresultinelectricshock,reand/or
seriousinjury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodiedplugsandmatchingoutletswill
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
6. If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
7. Use of power supply via an RCD with a rated
residual current of 30 mA or less is always
recommended.
Personal Safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the inuence of drugs, alcohol or med-
ication. A moment of inattention while operating
powertoolsmayresultinseriouspersonalinjury.
2. Use personal protective equipment. Always
wear eye protection. Protective equipment such
as a dust mask, non-skid safety shoes, hard hat or
hearing protection used for appropriate conditions
willreducepersonalinjuries.
3. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
yourngerontheswitchorenergisingpowertools
that have the switch on invites accidents.
4. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
resultinpersonalinjury.
5. Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
6. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing, and gloves
away from moving parts.Looseclothes,jewel-
lery or long hair can be caught in moving parts.
7. If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
Power tool use and care
1. Do not force the power tool. Use the correct
power tool for your application. The correct
powertoolwilldothejobbetterandsaferatthe
rate for which it was designed.
2. Do not use the power tool if the switch does
not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and
must be repaired.
3. Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such pre-
ventive safety measures reduce the risk of starting
the power tool accidentally.
4. Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.

Produktspecifikationer

Varumärke: Makita
Kategori: Borrmaskin
Modell: HR1840

Behöver du hjälp?

Om du behöver hjälp med Makita HR1840 ställ en fråga nedan och andra användare kommer att svara dig


Borrmaskin Makita Manualer

Makita

Makita HR2631FTX4 Bruksanvisning

8 Januari 2025
Makita

Makita HR4002 Bruksanvisning

23 December 2024
Makita

Makita DDF459 Bruksanvisning

22 December 2024
Makita

Makita HP2070 Bruksanvisning

13 Oktober 2024
Makita

Makita DHR263ZJ Bruksanvisning

12 Oktober 2024
Makita

Makita HP332D Bruksanvisning

8 Oktober 2024
Makita

Makita DDF485RTJ Bruksanvisning

7 Oktober 2024
Makita

Makita DDA350RFJ Bruksanvisning

7 Oktober 2024
Makita

Makita M6501 Bruksanvisning

6 Oktober 2024
Makita

Makita DTL061RMJ Bruksanvisning

4 Oktober 2024

Borrmaskin Manualer

Nyaste Borrmaskin Manualer

Metabo

Metabo PowerMaxx BS 12 BL Bruksanvisning

9 Januari 2025
Holzmann

Holzmann SB 4116HN Bruksanvisning

7 Januari 2025
Bavaria

Bavaria BCD 12/1 Bruksanvisning

7 Januari 2025
Einhell

Einhell BT-ID 710 E Bruksanvisning

7 Januari 2025
DeWalt

DeWalt DCB126 Bruksanvisning

6 Januari 2025
MSW

MSW -DMS400 Bruksanvisning

5 Januari 2025
DeWalt

DeWalt DCD1624 Bruksanvisning

3 Januari 2025
DeWalt

DeWalt DW9106 Bruksanvisning

31 December 2025
Gude

Gude GTB 16/12 R+L Bruksanvisning

31 December 2025
Metabo

Metabo BS 12 BL Q Bruksanvisning

31 December 2025