Makita HR3210C Bruksanvisning

Makita Borrmaskin HR3210C

Läs nedan 📖 manual på svenska för Makita HR3210C (12 sidor) i kategorin Borrmaskin. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/12
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
DOUBLE INSULATION
IMPORTANT: Read Before Using.
Rotary Hammer
HR3200C
HR3210C
HR3210FCT
008536
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model HR3200C HR3210C HR3210FCT
Tungsten-carbide tipped bit 32 mm
Concrete Core bit 90 mm
Steel 13 mm
Capacities
Wood 32 mm
No load speed (min-1) 315 - 630
Blows per minute 1,650 - 3,300
Overall length 398 mm 424 mm
Net weight 4.8 kg 5.2 kg 5.4 kg
Safety class /II
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END201-5
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Read instruction manual.
･ DOUBLE INSULATION
･ Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible recycling
facility.
ENE044-1
Intended use
The tool is intended for hammer drilling in brick, concrete
and stone as well as for chiselling work.
ENF002-1
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN60745:
Model HR3200C,HR3210C
Sound pressure level (L
pA) : 89 dB(A)
Sound power level (L
WA) : 100 dB(A)
Uncertainty (K) : 3 dB(A)
Model HR3210FCT
Sound pressure level (L
pA) : 88 dB(A)
Sound power level (L
WA) : 99 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model HR3200C
Work mode : hammer drilling into concrete
Vibration emission (ah,HD) : 18.0 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode : chiseling
Vibration emission (ah,CHeq) : 12.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: drilling into metal
Vibration emission (ah,D) : 2.5 m/s
2 or less
Uncertainty (K) : 1.5 m/s2
Model HR3210C
Work mode : hammer drilling into concrete
Vibration emission (ah,HD) : 10.0 m/s2
Uncertainty (K) : 1.5 m/s2
3
Work mode : chiseling
Vibration emission (ah,CHeq) : 7.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: drilling into metal
Vibration emission (ah,D) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
Model HR3210FCT
Work mode : hammer drilling into concrete
Vibration emission (ah,HD) : 10.0 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode : chiseling
Vibration emission (ah,CHeq) : 8.0 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: drilling into metal
Vibration emission (ah,D) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
ENG901-1
• The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-14
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Rotary Hammer
Model No./ Type: HR3200C,HR3210C,HR3210FCT
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd.
Michigan Drive, Tongwell,
Milton Keynes, MK15 8JD, England
30.1.2009
000230
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, JAPAN
GEA005-3
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.

Produktspecifikationer

Varumärke: Makita
Kategori: Borrmaskin
Modell: HR3210C

Behöver du hjälp?

Om du behöver hjälp med Makita HR3210C ställ en fråga nedan och andra användare kommer att svara dig


Borrmaskin Makita Manualer

Makita

Makita HR2631FTX4 Bruksanvisning

8 Januari 2025
Makita

Makita HR4002 Bruksanvisning

23 December 2024
Makita

Makita DDF459 Bruksanvisning

22 December 2024
Makita

Makita HP2070 Bruksanvisning

13 Oktober 2024
Makita

Makita DHR263ZJ Bruksanvisning

12 Oktober 2024
Makita

Makita HP332D Bruksanvisning

8 Oktober 2024
Makita

Makita DDF485RTJ Bruksanvisning

7 Oktober 2024
Makita

Makita DDA350RFJ Bruksanvisning

7 Oktober 2024
Makita

Makita M6501 Bruksanvisning

6 Oktober 2024
Makita

Makita DTL061RMJ Bruksanvisning

4 Oktober 2024

Borrmaskin Manualer

Nyaste Borrmaskin Manualer

Metabo

Metabo PowerMaxx BS 12 BL Bruksanvisning

9 Januari 2025
Holzmann

Holzmann SB 4116HN Bruksanvisning

7 Januari 2025
Bavaria

Bavaria BCD 12/1 Bruksanvisning

7 Januari 2025
Einhell

Einhell BT-ID 710 E Bruksanvisning

7 Januari 2025
DeWalt

DeWalt DCB126 Bruksanvisning

6 Januari 2025
MSW

MSW -DMS400 Bruksanvisning

5 Januari 2025
DeWalt

DeWalt DCD1624 Bruksanvisning

3 Januari 2025
DeWalt

DeWalt DW9106 Bruksanvisning

31 December 2025
Gude

Gude GTB 16/12 R+L Bruksanvisning

31 December 2025
Metabo

Metabo BS 12 BL Q Bruksanvisning

31 December 2025