Makita JR3000V Bruksanvisning

Makita Sågmaskin JR3000V

Läs nedan 📖 manual på svenska för Makita JR3000V (32 sidor) i kategorin Sågmaskin. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/32

Recipro saw Instruction Manual

Scie recipro Manuel d’Instructions

Reciprosäge Betriebsanleitung

Seghetto diritto Istruzioni d’Uso

Reciprozaag Gebruiksaanwijzing

Sierra alternativa Manual de Instrucciones

Serra de sabre Manual de Instruço˜ es

Bajonet sav Brugsanvisning

Tigersåg Bruksanvisning

Bajonettsag Bruksanvisning

Puukkosaha Käyttöohje

GR ¶·ÏÈÓ‰ÚÔÌÈÎﬁ ÚÈÔÓÈ √‰ËÁ›Â˜ ÃÚ‹ÛÂˆ˜

JR3000

JR3000V

1 2

3 4

5 6

7 8

ENGLISH Explanation of general view

1Hex wrench

2Bolt

3Shoe

4Bolt

5Speed change switch

6Switch trigger

7Lock button/Lock-oﬀ button

8Speed control screw

9High

0Low

qLimit mark

wBrush holder cap

eScrewdriver

SPECIFICATIONS

Model JR3000 JR3000V

Length of stroke .......................................................................... 30 mm 30 mm

Strokes per minute ...................................................................... Hi : 2,500 Low : 1,900 0 – 2,300

Overall length .............................................................................. 400 mm 400 mm

Net weight ................................................................................... 2.9 kg 2.9 kg

•Due to the continuing program of research and

development, the speciﬁcations herein are subject

to change without prior notice.

•Note: Speciﬁcations may diﬀer from country to

country.

Power supply

The machine should be connected only to a power

supply of the same voltage as indicated on the

nameplate, and can only be operated on single-phase

AC supply. They are double-insulated in accordance

with European Standard and can, therefore, also be

used from sockets without earth wire.

Safety hints

For your own safety, please refer to enclosed Safety

instructions.

These symbols mean:

Read instruction manual.

DOUBLE INSULATION

ADDITIONAL SAFETY RULES

1. Avoid cutting nails. Inspect for and remove all

nails from the workpiece before operation.

2. Do not cut oversize workpiece.

3. Check for the proper clearance beyond the

workpiece before cutting so that the blade will

not strike the ﬂoor, workbench, etc.

4. Hold the machine ﬁrmly.

5. Make sure the blade is not contacting the

workpiece before the switch is turned on.

6. Keep hands away from moving parts.

7. When cutting through walls, ﬂoors or wher-

ever ‘‘live’’ electrical wires may be encoun-

tered, DO NOT TOUCH ANY METAL PARTS OF

THE MACHINE! Hold the machine by the insu-

lated grasping surfaces to prevent electric

shock if you cut through a ‘‘live’’ wire.

8. Do not leave the machine running. Operate the

machine only when hand-held.

9. Always switch oﬀ and wait for the blade to

come to a complete stop before removing the

blade from the workpiece.

10. Do not touch the blade or the workpiece imme-

diately after operation; they may be extremely

hot and could burn your skin.

SAVE THESE INSTRUCTIONS.

OPERATING INSTRUCTIONS

Installing saw blade (Fig. 1)

Important:

Always be sure that the machine is switched oﬀ and

unplugged before installing or removing the blade.

First, use the hex wrench to loosen the bolt. With the

blade teeth facing upward or downward, insert the

blade until the hole in the blade shank is just over the

protrusion on the slider. Then tighten the bolt to

secure the blade.

Adjusting shoe (Fig. 2)

Loosen the two bolts holding the shoe. Then slide the

shoe back or forth to the desired position and tighten

the two bolts securely. When the blade loses its

cutting eﬀectiveness in one place, reposition the shoe

to obtain better cutting in another.

Speed change (For JR3000 only) (Fig. 3)

CAUTION:

Use the speed change switch only after the machine

comes to a complete stop.

To change the machine speed, move the speed

change switch to the ‘‘L’’ position for low speed or the

‘‘H’’ position for high speed.

High speed: ordinary wood, plys or plastics

Low speed: metals (steel pipe, sheet metal, stainless

or copper)

Switch action (For JR3000) (Fig. 4)

CAUTION:

Before plugging the machine, always check to see

that the switch trigger actuates properly and returns to

the ‘‘OFF’’ position when released.

Produktspecifikationer

Varumärke:	Makita
Kategori:	Sågmaskin
Modell:	JR3000V

Behöver du hjälp?

Om du behöver hjälp med Makita JR3000V ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Sågmaskin Makita Manualer

Makita DUC306PG2 Bruksanvisning

8 Januari 2025

Makita DJR187ZK Bruksanvisning

15 December 2024

Makita 5603 Bruksanvisning

15 Oktober 2024

Makita DJV181Z Bruksanvisning

12 Oktober 2024

Makita DUC353Z Bruksanvisning

8 Oktober 2024

Makita JR001GD202 Bruksanvisning

4 Oktober 2024

Makita EA3502S Bruksanvisning

2 Oktober 2024

Makita DJV140 Bruksanvisning

2 Oktober 2024

Makita DJV182RTJ Bruksanvisning

30 September 2024

Makita HS301DWAE Bruksanvisning

30 September 2024

Sågmaskin Manualer

Nyaste Sågmaskin Manualer

Craftsman CMCPS630 Bruksanvisning

10 Januari 2025

Husqvarna 455e Rancher Bruksanvisning

8 Januari 2025

Gude GSS 400 Bruksanvisning

8 Januari 2025

Cocraft PRO RT18-PL Bruksanvisning

8 Januari 2025

Echo CS-400 Bruksanvisning

8 Januari 2025

Echo CS-370 Bruksanvisning

8 Januari 2025

Fuxtec FX-E1HAS20 Bruksanvisning

8 Januari 2025

Einhell BT-MB 550 U Bruksanvisning

7 Januari 2025

Sun Joe 24V-CSSHRP-CT Bruksanvisning

7 Januari 2025

Powerblade MX9500 Bruksanvisning

7 Januari 2025