Makita PH02X2 Bruksanvisning

Makita Borrmaskin PH02X2

Läs nedan 📖 manual på svenska för Makita PH02X2 (28 sidor) i kategorin Borrmaskin. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/28

INSTRUCTION MANUAL

MANUEL D'INSTRUCTION

MANUAL DE INSTRUCCIONES

Cordless Hammer Driver Drill

Perceuse Percussion-Visseuse

sans Fil

Rotomartillo Atornillador

Inalámbrico

PH01

PH02

IMPORTANT: Read Before Using.

IMPORTANT : Lire avant usage.

IMPORTANTE: Lea antes de usar.

2 ENGLISH

ENGLISH (Original instructions)

SPECIFICATIONS

Model PH01 PH02

Capacities Masonry 10 mm (3/8") 13 mm (1/2")

Steel 10 mm (3/8") 13 mm (1/2")

Wood 25 mm (1") 36 mm (1-7/16")

Wood screw 5.1 mm x 63 mm

(13/64" x 2-1/2")

6 mm x 75 mm (1/4" x 2-15/16")

Machine screw 6 mm (1/4")

No load speed (RPM) High (2) 0- 1,400 /min

Low (1) 0 - 400 /min

Blows per minute High (2) 0 - 21,000

Low (1) 0 - 6,000

Overall length 216 mm (8-1/2") 246 mm (9-11/16")

Net weight 1.5 kg (3.3lbs) 1.7 kg (3.8lbs)

Rated voltage D.C. 14.4 V D.C. 18 V

Standard battery cartridges BL1411G / BL1413G /

BL1415G

BL1811G / BL1813G /

BL1815G

• Due to our continuing programme of research and development, the specications herein are subject to change

without notice.

• Specications and battery cartridge may differ from country to country.

• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

General Power Tool Safety Warnings

WARNING Read all safety warnings and all instruc-

tions. Failure to follow the warnings and instructions may

result in electric shock, re and/or serious injury.

Save all warnings and instruc-

tions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical safety

Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

earthed (grounded) power tools. Unmodied plugs and

matching outlets will reduce risk of electric shock.

5. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of elec-

tric shock if your body is earthed or grounded.

6. Do not expose power tools to rain or wet con-

ditions. Water entering a power tool will increase

the risk of electric shock.

7. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords

increase the risk of electric shock.

When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric shock.

9. If operating a power tool in a damp location is

unavoidable, use a ground fault circuit inter-

rupter (GFCI) protected supply. Use of an GFCI

reduces the risk of electric shock.

Personal safety

10. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the inuence of drugs, alcohol or med-

ication. A moment of inattention while operating

power tools may result in serious personal injury.

11. Use personal protective equipment. Always

wear eye protection. Protective equipment such

as dust mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate conditions

will reduce personal injuries.

12. Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools with

your nger on the switch or energising power tools

that have the switch on invites accidents.

13. Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may

result in personal injury.

3 ENGLISH

14. Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

15. Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing, and gloves

away from moving parts. Loose clothes, jewel-

lery or long hair can be caught in moving parts.

16. If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used. Use of

dust collection can reduce dust-related hazards.

Power tool use and care

17. Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at the

rate for which it was designed.

18.

Do not use the power tool if the switch does not turn

it on and off. Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

19. Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments, changing

accessories, or storing power tools. Such pre-

ventive safety measures reduce the risk of starting

the power tool accidentally.

20. Store idle power tools out of the reach of chil-

dren and do not allow persons unfamiliar with

the power tool or these instructions to operate

the power tool. Power tools are dangerous in the

hands of untrained users.

21. Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may affect the

power tool’s operation. If damaged, have the

power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

22. Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

23. Use the power tool, accessories and tool bits

etc. in accordance with these instructions, tak-

ing into account the working conditions and

the work to be performed. Use of the power tool

for operations different from those intended could

result in a hazardous situation.

Battery tool use and care

24. Recharge only with the charger specied by

the manufacturer. A charger that is suitable for

one type of battery pack may create a risk of re

when used with another battery pack.

25. Use power tools only with specically desig-

nated battery packs. Use of any other battery

packs may create a risk of injury and re.

26. When battery pack is not in use, keep it away

from other metal objects, like paper clips,

coins, keys, nails, screws or other small metal

objects, that can make a connection from one

terminal to another. Shorting the battery termi-

nals together may cause burns or a re.

27. Under abusive conditions, liquid may be

ejected from the battery; avoid contact. If con-

tact accidentally occurs, ush with water. If

liquid contacts eyes, additionally seek medical

help. Liquid ejected from the battery may cause

irritation or burns.

Service

28. Have your power tool serviced by a qualied

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

29. Follow instruction for lubricating and chang-

ing accessories.

30. Keep handles dry, clean and free from oil and

grease.

CORDLESS HAMMER DRILL

SAFETY WARNINGS

1. Wear ear protectors with impact drills.

Exposure to noise can cause hearing loss.

2. Use auxiliary handles supplied with the tool.

Loss of control can cause personal injury. (if

supplied)

3. Hold power tools by insulated gripping sur-

faces when performing an operation where

the cutting tool may contact hidden wiring or

its own cord. Contact with a "live" wire will make

exposed metal parts of the tool "live" and shock

the operator.

4. Hold power tool by insulated gripping sur-

faces, when performing an operation where

the fastener may contact hidden wiring or its

own cord. Fasteners contacting a "live" wire may

make exposed metal parts of the power tool "live"

and could give the operator an electric shock.

5. Always be sure you have a rm footing.

Be sure no one is below when using the tool in

high locations.

6. Hold the tool rmly.

7. Keep hands away from rotating parts.

8. Do not leave the tool running. Operate the tool

only when hand-held.

9. Do not touch the drill bit or the workpiece

immediately after operation; they may be

extremely hot and could burn your skin.

10. Some material contains chemicals which may

be toxic. Take caution to prevent dust inhala-

tion and skin contact. Follow material supplier

safety data.

SAVE THESE INSTRUCTIONS.

WARNING: DO NOT let comfort or famil-

iarity with product (gained from repeated

use) replace strict adherence to safety

rules for the subject product. MISUSE or

failure to follow the safety rules stated in

this instruction manual may cause serious

personal injury.

Symbols

The followings show the symbols used for tool.

volts

direct current

Produktspecifikationer

Varumärke:	Makita
Kategori:	Borrmaskin
Modell:	PH02X2

Behöver du hjälp?

Om du behöver hjälp med Makita PH02X2 ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Borrmaskin Makita Manualer

Makita P-90451 Bruksanvisning

1 April 2025

Makita HR2450 Bruksanvisning

28 Mars 2025

Makita HR5001C Bruksanvisning

28 Mars 2025

Makita 6501X Bruksanvisning

28 Mars 2025

Makita HK1800 Bruksanvisning

28 Mars 2025

Makita HR3000C Bruksanvisning

28 Mars 2025

Makita HR2510 Bruksanvisning

27 Mars 2025

Makita HK1810 Bruksanvisning

27 Mars 2025

Makita HR2631FTX4 Bruksanvisning

8 Januari 2025

Makita HR4002 Bruksanvisning

23 December 2024

Borrmaskin Manualer

Nyaste Borrmaskin Manualer

Hitachi D10VC3 (35JR) Bruksanvisning

2 April 2025

Bavaria By Einhell BPAS 14,4-2A Bruksanvisning

2 April 2025

Bavaria By Einhell BPAS 14,4 AK Bruksanvisning

2 April 2025

Bavaria By Einhell BSM 1000-2E Bruksanvisning

2 April 2025

Sun Joe 24V-DD-CT-RM Bruksanvisning

1 April 2025

Einhell AS-E 18-2 Bruksanvisning

30 Mars 2025

Kraftronic KT-AS 12 Li Bruksanvisning

29 Mars 2025

Kraftronic KT-SB 650 Bruksanvisning

29 Mars 2025

Einhell BT-MX 1300 E Bruksanvisning

29 Mars 2025

Verto 65H105 Bruksanvisning

28 Mars 2025