Makita TW140D Bruksanvisning

Läs nedan 📖 manual på svenska för Makita TW140D (44 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/44
TW140D
EN Cordless Impact Wrench INSTRUCTION MANUAL 3
SV Sladdlös mutterdragare BRUKSANVISNING 8
NO Batteridrevet slagskrutrekker BRUKSANVISNING 13
FI Akkuyttöinen iske
mutterinväännin KÄYTTÖOHJE 18
LV Bezvada
triecienuzgriežņatslēga LIETANAS INSTRUKCIJA 23
LT Belaidis smūginis
veržliasukis NAUDOJIMO INSTRUKCIJA 28
ET Juhtmeta ökmutrivõti KASUTUSJUHEND 33
RU Аккумуляторный ударный
гайковерт
РУКОВОДСТВО ПО
ЭКСПЛУАТАЦИИ 38
1
2
3
Fig.1
1
2
Fig.2
1
Fig.3
1
Fig.4
1
AB
Fig.5
1
2
Fig.6
1
2
3
Fig.7
Fig.8
2
3 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: TW140D
Fastening capacities Standard bolt M8 - M16
High tensile bolt M6 - M12
Square drive 9.5 mm
No load speed 0 - 2,600 min-1
Impacts per minute 0 - 3,200 min-1
Overall length 161 mm
Rated voltage D.C. 10.8 V - 12 V max
Net weight 1.0 - 1.2 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydifferfromcountrytocountry.
• Theweightmaydifferdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Batterycartridge BL1015 / BL1016 / BL1020B / BL1021B / BL1040B / BL1041B
Charger DC10SA / DC10SB / DC10WC / DC10WD / DC18RE
• Someofthebatterycartridgesandchargerslistedabovemaynotbeavailabledependingonyourregionof
residence.
WARNING: Only use the battery cartridges and chargers listed above.Useofanyotherbatterycartridges
andchargersmaycauseinjuryand/orre.
Intended use
The tool is intended for fastening bolts and nuts.
Noise
ThetypicalA-weightednoiseleveldeterminedaccord-
ing to EN62841:
Soundpressurelevel(L
pA):88dB(A)
Soundpowerlevel(L
WA):99dB(A)
Uncertainty(K):3dB(A)
WARNING: Wear ear protection.
Vibration
Thevibrationtotalvalue(tri-axialvectorsum)deter-
mined according to EN62841:
Work mode: impact tightening of fasteners of the maxi-
mumcapacityofthetool
Vibrationemission(ah):8.0m/s2
Uncertainty(K):1.5m/s2
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
methodandmaybeusedforcomparingonetoolwith
another.
NOTE: The declared vibration emission value
mayalsobeusedinapreliminaryassessmentof
exposure.
WARNING: The vibration emission during actual
use of the power tool can differ from the declared
emissionvaluedependingonthewaysinwhichthe
tool is used.
WARNING:Besuretoidentifysafetymeasures
to protect the operator that are based on an estima-
tionofexposureintheactualconditionsofuse(taking
accountofallpartsoftheoperatingcyclesuchas
the times when the tool is switched off and when it is
runningidleinadditiontothetriggertime).
EC Declaration of Conformity
For European countries only
TheECdeclarationofconformityisincludedasAnnexA
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
tions, illustrations and specications provided
with this power tool. Failure to follow all instructions
listedbelowmayresultinelectricshock,reand/or
seriousinjury.

Produktspecifikationer

Varumärke: Makita
Kategori: Inte kategoriserad
Modell: TW140D

Behöver du hjälp?

Om du behöver hjälp med Makita TW140D ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Makita Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer