Manhattan 179195 Bruksanvisning

Läs nedan 📖 manual på svenska för Manhattan 179195 (4 sidor) i kategorin Kablar för PC och kringutrustning. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/4
Hi-Speed USB 2.0
to SAtA/ide
AdApter
USer mAnUAl
Model 179195
MAN-179195-UM-0609-06
Thank you for purchasing the MANHATTAN
®
Hi-Speed USB 2.0 to
SATA/IDE Adapter, Model 179195.
This convenient device connects SATA, SATA-enhanced, IDE and
enhanced-IDE hard disks to desktop and notebook computers using a
USB port to more easily transfer, share and back uples or store large
le archives on external drives.
Installation of the adapter is quick and simple, so you’ll soon be enjoying
the benets of these features:
Supports data transfer SATA speeds up to 1.5 Gbps and Hi-Speed
USB 2.0 speeds up to 480 Mbps
Supports 48-bit LBA (Logical Block Addressing) for drives up to 750 GB
Fits external SATA and IDE hard disks up to 5.25
Plug and Play; hot-swappable; Windows, Mac and Linux compatible
Lifetime Warranty
inStAllAtion
NOTE: Do not store or operate this device in excessive heat or humidity.
If the initial installation attempt fails, go to My Computer / Control Panel
/ System Properties / Device Manager and remove any items tagged with
a question mark (?) or exclamation point (!).
1. Connect the Hi-Speed USB 2.0 to SATA/IDE Adapter to the HDD
IDE port and the computer’s USB port.
2. Windows will detect a new device and automatically install the driver.
NOTE: No added software is needed for basic operation of this device.
To use the one-touch backup button/function, however, the included
software needs to be installed (Step 3 below).
To verify the connection, go to My Computer / Control Panel / System
Properties / Device Manager. Open “Hard disk controllers” to display
the newly added hard disk drive.
If connecting to a brand new hard disk drive, use “Fdisk” to set its
capacity. NOTE: This will destroy any data on the HDD. Back up any
data on the drive rst if it needs to be saved. Format the HDD using
standard procedures. If its icon appears on the desktop but you can’t
2
nd it listed, check/conrm the following:
- The HDD has been properly installed
- The HDD is set in theMaster” position
- The correct driver for this HDD is installed
3. Install the one-touch backup software from the included CD by
following the simple on-screen instructions.
SpecificAtionS
Standards and Certications
Hi-Speed USB 2.0, USB 1.1, SATA 1.0, FCC, CE, EuP; complies with
ATA/ATAOI-100 spec v1.0 standards
General
USB 2.0 type-A male; SATA L-type male; IDE 40-pin; IDE 44-pin ports
• Hi-Speed USB 2.0 transfer interfaces
• 480 Mbps maximum transfer rate
• Supports SATA, enhanced-SATA, IDE and enhanced-IDE drives
Power Supply
• Input: 100 – 240 V AC; 50/60 Hz maximum 0.8 A
• Output: 12 V / 2 A
• Cable: 1.5 m (59 in.)
Physical
• 8.5 x 6 x 1.7 cm (3.375 x 2.375 x 0.7 in.)
• Cables: USB, 80 cm (31.5 in.); 4-pin power, 10 cm (4 in.)
• Weight: 280 g (9.9 oz.)
System Requirements
• Available USB type-A port
• Windows 2000/XP/Vista/7
Package Contents
• Hi-Speed USB 2.0 to SATA / IDE Adapter
• User manual and software CD
3

Produktspecifikationer

Varumärke: Manhattan
Kategori: Kablar för PC och kringutrustning
Modell: 179195

Behöver du hjälp?

Om du behöver hjälp med Manhattan 179195 ställ en fråga nedan och andra användare kommer att svara dig




Kablar för PC och kringutrustning Manhattan Manualer

Kablar för PC och kringutrustning Manualer

Nyaste Kablar för PC och kringutrustning Manualer