Manhattan T3 Bruksanvisning

Läs nedan 📖 manual på svenska för Manhattan T3 (20 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/20
Check Freeview HD
coverage in your area by
visiting freeview.co.uk
For assistance,
call us on 020 8450 0005
or visit manhattan-tv.com/help
GET STARTED
2
INSTALLING YOUR T3
Unpack the following from your Giftbox:
You Need
A TV with an HDMI input.
A TV aerial and cable. While some indoor (portable) aerials may pick up Freeview
channels, for best results use a rooftop aerial.
An internet connection using Wi-Fi or an Ethernet cable (not included) for apps and
Freeview Play features.
Before you plug in, please read the Safety section of the Important
Information booklet.
Manhattan T3
HDMI cable Power adapter
2x AAA batteries
Remote control
3
Connect Up
Connect the cable from your aerial wall socket to your T3.
Next, connect the T3 to your TV using the HDMI cable provided.
An internet connection is required for apps, Freeview Play features and to receive
software updates over the internet. Wi-Fi can be selected during initial setup but for
high-bandwidth 4K content we recommend you connect your T3 to your internet router
using an Ethernet cable (not included).
Finally, plug the AC power adapter into a wall socket that is turned o, then connect the
other end to the T3.
If you want to use your TV’s tuner, connect an aerial cable from the T3’s Loop Out socket to the
aerial input of your TV. Please note that to conserve energy the Loop Out socket is disabled in
standby by default. See page 15 for details.
Switch On
Open the battery compartment cover on the back of the remote by sliding the cover.
Insert the batteries, matching the + and – symbols to what is marked on the inside of
the compartment. Replace the cover.
Turn on the wall socket you connected your T3 to and the T3 will switch on.
Turn on your TV set and choose the HDMI input you connected your Manhattan T3 to.
Most TV remotes use a button labelled ‘AV’, ‘SOURCE’, ‘INPUT’ or , with each press
cycling through its inputs.
Your Manhattan remote can be easily programmed to control your TV’s input, adjust its volume
and turn it on and off. See page 17 for details.
Follow the on-screen instructions to set up your T3. It takes about 5 minutes, which is the
perfect amount of time to read the rest of this Guide!

Produktspecifikationer

Varumärke: Manhattan
Kategori: Inte kategoriserad
Modell: T3

Behöver du hjälp?

Om du behöver hjälp med Manhattan T3 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Manhattan Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer