Marshall Electronics CV420-30X-NDI Bruksanvisning

Läs nedan 📖 manual på svenska för Marshall Electronics CV420-30X-NDI (16 sidor) i kategorin Videokonferenssystem. Denna guide var användbar för 16 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/16
B r o a d c a s t A / V D i v i s i o n
CV420-30X-NDI
30X NDI®|HX Camera
User Manual
1
Table of Contents
1. Package Contents
2. Function Introduction
2.1 I/O Functions Introduction
2.2 Tally Indicator Light Function Description
3. Installation Instructions
3.1 Installation Basics
3.2 Connecting Devices
4. Network Function Settings
4.1 Web System Requirements
4.2 Connecting Camera to Network
4.3 Web Page Function Description
5. Specifications
6. Troubleshooting
Warranty
Safety Instructions
NDI Instruction
06
06
06
07
07
07
08
11
11
11
14
26
28
29
04
03
3
Understanding Quick setup of CV420-30X-NDI with NDI®|HX
This section explains how to quickly configure the Marshall CV420-30X-NDI camera with NDI®|HX.
It also explains how to update the device, and where you can find additional NDI software to extend your
workflow. Complete NDI® Tools can be found here: https://www.ndi.tv/tools/
Here you will choose whether you will require NDI® Tools for Windows or Mac and download.
After completing this short section, you will be all set to begin using your new NDI®|HX camera.
OVERVIEW: Unlike typical cameras, CV420-30X-NDI leverages the easy plug-n-play benefits of the NDI-based
IP workflow supported by leading video software and hardware developers around the globe.
GETTING READY: Your new CV420-30X-NDI uses the NDI®|HX protocol for audio/video transmission, and
more. Your first step will be to install NDI|HX drivers if using a TriCaster, or Microsoft HEVC decode on non-
TriCaster systems, as appropriate for your computer platform or device.
1. Navigate to ndi.tv/formats in your web browser and follow the relevant directions to download and install
the drivers for your computer platform. NOTE: The NDI|HX driver also installs NewTek’s NDI Studio
Monitor application, which will not only display the output of your camera but also provide easy access
to its settings. Also contains built-in PTZ controls.
2. NDI Studio Monitor and other useful NDI tools can be found here: https://www.ndi.tv/tools/
3. Then simply plug the Ethernet (NDI) port to same Network your computer or Newtek equipment are
plugged into and off you go.
NOTE: The End User License Agreement under which you use the NDI|HX driver specifies that “you may use
up to five (5), and no more than five, copies on separate machines at one time.
OPTIONAL for Microsoft Windows® users, downloading and installing the NewTek NDI® Tools pack,
available at no cost from ndi.tv/tools/, the download pack will provide learning tools and utilities to maximize
your NDI®|HX experience.
FINAL NOTE if you are experiencing any problems with the NDI® platform, NDI® software, NDI® drivers
please contact Newtek for technical assistance or join the NDI community to review HOW-TO videos, social
media, forums, blogs: www.ndi.tv/community
If you are having a hardware problem, and need assistance please contact Marshall Electronics.
Marshall Customer Support
Toll Free: 800-800-6608 or 310-333-0606
Email: support@marshall-usa.com

Produktspecifikationer

Varumärke: Marshall Electronics
Kategori: Videokonferenssystem
Modell: CV420-30X-NDI

Behöver du hjälp?

Om du behöver hjälp med Marshall Electronics CV420-30X-NDI ställ en fråga nedan och andra användare kommer att svara dig




Videokonferenssystem Marshall Electronics Manualer

Videokonferenssystem Manualer

Nyaste Videokonferenssystem Manualer