Martin DMX Interface Bruksanvisning

Martin Inte kategoriserad DMX Interface

Läs nedan 📖 manual på svenska för Martin DMX Interface (32 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/32
DMX Interface
user manual
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
AC Power Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
To install a plug on the mains lead. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Data Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Recommended cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
To connect the DMX Interface to the DMX link . . . . . . . . . . . . . . . . . . . . . . 6
To connect Martin fixtures to the DMX Interface . . . . . . . . . . . . . . . . . . . . . 6
DIP-switch Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
DMX Interface settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
To set the 10-position DIP-switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
To set the 6-position DIP-switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Fixture settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
To set the fixture address. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Status LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
DMX Protocols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
©1999 - 2000 Martin Professional A/S, Denmark.
All rights reserved. No part of this manual may be
reproduced, in any form or by any means, without
permission in writing from Martin Professional A/S,
Denmark.
Printed in Denmark.
P/N 35000013, Rev. C
Introduction 3
I
NTRODUCTION
1
The Martin DMX Interface converts DMX data into Martin data to allow you to
control an older, Martin-protocol-only fixture with a DMX controller. The DMX
Interface supports the following Martin products:
Note! A separate DMX Interface is required for each type of fixture.
The DMX Interface operates only one type of fixture at a time. It can operate
multiple fixtures of the same type. The table above shows the maximum number
of each fixture type that can be operated with a single DMX Interface.
P A C K A G E C O N T E N T S
Please make sure that you received the following with your DMX Interface:
1 X Martin Professional DMX Interface
1 X Terminator Plug
Fixture Type Fixtures per Interface
RoboColor MSD 8
RoboColor 8
RoboColor II 8
RoboScan 804/805 8
RoboScan 1004/1005 8
RoboScan 1016 8
RoboScan 1020 4
RoboScan Pro 218 8
RoboScan Pro 1220 4
RoboScan Pro 1220 II 4
RoboScan Pro 1220 IIR 4
RoboZap 8
RoboZap MSR 1200 8
Centrepiece 8
Table 1: Supported fixtures

Produktspecifikationer

Varumärke: Martin
Kategori: Inte kategoriserad
Modell: DMX Interface

Behöver du hjälp?

Om du behöver hjälp med Martin DMX Interface ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Martin Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer