Mercury 2WDP001 Bruksanvisning

Läs nedan 📖 manual på svenska för Mercury 2WDP001 (4 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/4
www.avsl.com 001UK User Manual 350.
2.4GHz Wireless Door Phone
Order ref: 350.001 UK
User Manual
This wireless door phone system allows you to talk to your visitors before opening the door. No wires are
required between the external and internal units, making this system very easy to insta , and a range of ll
up to 150m makes this useful for security and helpful for the elderly or less mobile.
Features:
Easy to install no wiring required ;
Battery operated IP44 rated external unit with low power consumption
Battery back-up feature on internal u t ni
Wireless range up to 150m (clear sight)
Adjustable ringer volume
In the box:
IP44 rated external call unit
Internal handset & cradle
Internal handset PSU
Fixing kit
User guide
Installation:
External Call Unit
1. Fasten the rain shade on the wall 1.4~1.7m above the ground.
2. Remove the screw from the bottom of the ternal unit and remove the bottom plate. ex
www.av .comsl UK User Manual 350.001
3. Remove the silver cover and install 4 AA batteries (not supplied) paying attention to the polarix ty
indicators within the battery compartm ent.
4. Remove name card cover and complete the card as required ie. name, room number, etc. the
5. Attach the unit to the rain shade.
6. Replace the cover.
7. Replace the bottom plate.
www.avsl.com 001UK User Manual 350.
Internal Handset
Ensure that there is a power outlet within reach the handset and its power supply. of
1. Remove the cradle from rear of handset and attach to the wall. the the
2. Open the battery cover, install 4 x AA batteries (not supplied) and replace the cover.
3. Insert the power supply jack into the socket on the re of the handset. ar
4. Hook the handset onto the cradle.
5. Plug the power supply into a power outlet and switch it on. The handset will beep.
The system is now ready f use. or
Operation:
In standby mode, the handset LED will blink every 3 seconds.
When the call button is pressed on the external unit, the handset will chime twice and the LED will change
from blinking to steady.
The external unit will also sound intermittently for approximately one minute or until the handset picked is
up to receive the call.
Lift the handset to speak to the caller.
At the end of the call replace the handset ensuring that it is secure in its cradle. Both units will beep.
If left unanswered, both units will beep after one minute and the system will return to standby mode.
The handset LED will blink rapidly for 10 minutes to indicate that the call button has been pressed after
which time it will return to one blink every 3 seconds.

Produktspecifikationer

Varumärke: Mercury
Kategori: Inte kategoriserad
Modell: 2WDP001

Behöver du hjälp?

Om du behöver hjälp med Mercury 2WDP001 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Mercury Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer