Metra 95-5860G Bruksanvisning

Metra Bilsats 95-5860G

Läs nedan 📖 manual på svenska för Metra 95-5860G (5 sidor) i kategorin Bilsats. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/5
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 1/5/22 INST95-5860G
I N S TA L L AT I O N I N S T R U C T I O N S
95-5860G
Attention! With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
KIT FEATURES
Textured trim panel designed to cover minor dash modifications.
DDIN brackets provide stable mounting points
Painted gray
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Speed clips (4) • D) Panel clips (4) • E) #10 x 3/4” Phillips screws (4) TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Socket wrench • Cutting tool
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation .......................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Visit metraonline.com for audio and steering
wheel interface options.
Antenna adapter: 40-EU10
A B C D E
Ford E-Series Cutaway 2021
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications
386.257.1187
|
MetraOnline.com
2
1. Remove the radio using the Metra
86-9001 radio removal tools. If you do
not have removal tools, the factory dash
panel can be removed with the radio
attached and then the radio can be
removed from the dash.
2. Unsnap and remove the dash panel.
(Figure A)
3. Bend the factory rear support back to
make room for traditional DDIN radios
depth. (Figure B)
4. Cut the pocket out of the factory dash
panel. (Figure C)
Continue to Kit Preparation
(Figure B)
(Figure A)
DASH DISASSEMBLY KIT PREPARATION
1. Place the (4) into the sub speed clips
dash. (Figure A)
2. Attach the (4) supplied to the panel clips
radio trim panel. (FigureB)
Continue to Kit Assembly
(Figure A)
(Figure B)
(Figure C)
Remove shaded area
REV. 1/5/2022 INST95-5860G 3
KIT ASSEMBLY
(Figure B)
(Figure C)(Figure A)
1. Attach the radio brackets to the radio
using screws supplied with the radio.
(Figure A)
2. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/
or AXXESS. Re-connect the negative
battery terminal and test the radio for
proper operation.
3. Secure the radio to the sub-dash using
the supplied screws. (Figure B)
4. Prior to completing assembly, it may be
a good idea here to place the dash panel
over the radio and snap the radio trim
panel to be sure the radio does not need
adjustments. (Figure C)
5. Re-assemble the factory dash panel
then snap the over the radio trim panel
radio to complete the install.

Produktspecifikationer

Varumärke: Metra
Kategori: Bilsats
Modell: 95-5860G

Behöver du hjälp?

Om du behöver hjälp med Metra 95-5860G ställ en fråga nedan och andra användare kommer att svara dig




Bilsats Metra Manualer

Metra

Metra 99-7367HG Bruksanvisning

25 September 2024
Metra

Metra 99-8223 Bruksanvisning

25 September 2024
Metra

Metra 99-7422 Bruksanvisning

25 September 2024
Metra

Metra 99-7875 Bruksanvisning

25 September 2024
Metra

Metra 99-3302 Bruksanvisning

25 September 2024
Metra

Metra 99-5802 Bruksanvisning

25 September 2024
Metra

Metra 99-7874 Bruksanvisning

25 September 2024
Metra

Metra 99-5832G Bruksanvisning

25 September 2024
Metra

Metra 99-9011 Bruksanvisning

25 September 2024
Metra

Metra 99-6000 Bruksanvisning

25 September 2024

Bilsats Manualer

Nyaste Bilsats Manualer