Metra 95-6523 Bruksanvisning

Metra Bilsats 95-6523

Läs nedan 📖 manual på svenska för Metra 95-6523 (8 sidor) i kategorin Bilsats. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/8
APPLICATIONS
METRA. The World’s best kits.metraonline.com1-800-221-0932 © COPYRIGHT 2014 METRA ELECTRONICS CORPORATION
REV. 9/18/2014 INST95-6523
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
INSTALLATION INSTRUCTIONS FOR PART 95-6523
• Double DIN radio provision
Custom texture
A) Radio trim panel • B) Radio brackets • C) Radio mounting brackets • D) (4) White plastic panel clips
• E) (8) 5mm x 12mm Phillips Screws
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: 70-1784 or XSVI-6523-NAV
Antenna Adapter: 40-VW10 or 40-EU10
• Panel removal tool Phillips screwdriver
• 86-5618 radio removal tool
• 86-3528 radio removal tool
TOOLS REQUIRED
D E
Dash Disassembly
Ram Promaster 2014-up ...................................... 2
Kit Assembly
Double DIN radio provision ................................... 3
Table of Contents
A B C
95-6523
Dash Disassembly
With radio delete or Single DIN
factory radio:
1. Using Metra’s 86-5618 radio
removal tools pull the factory radio
from the dash.
2. Remove (2) Phillips screws in
bottom of dash opening.
3. Unclip and remove the factory
radio trim panel.
With Double Din factory radio:
1. Using Metra’s 86-3528 radio
removal tools pull the factory radio
from the dash.
2. Remove (2) Phillips screws from
the bottom of the dash opening.
(Figure A)
95-6523
Kit Assembly
Double DIN radio provision
1. Attach the (4) panels clips to the
radio trim panel. (Figure A)
2. Break the small locating pin
from inside surface of each
radio bracket. (Figure B)
3. Position the radio mounting
brackets into the sub dash opening
and secure with the (2) Phillips
screws removed in disassembly.
(Figure C)
4. Attach the radio brackets to
the aftermarket radio using the
screws supplied with the radio or
the supplied (8) Phillips screws.
Note: Screws must not protrude
from slot in radio brackets as
interference with mounting
bracket will occur when sliding
radio into mounting brackets.
(Figure D)
5. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS.
Re-connect the negative battery
terminal and test the unit for
proper operation.
6. Slide the aftermarket radio into the
radio opening between the radio
mounting brackets until it clips into
the opening. (Figure E)
7. Snap the radio trim panel into
the opening around the
aftermarket radio.
(Figure C)
(Figure A)
(Figure B)
(Figure E)
(Figure D)
Remove pin

Produktspecifikationer

Varumärke: Metra
Kategori: Bilsats
Modell: 95-6523

Behöver du hjälp?

Om du behöver hjälp med Metra 95-6523 ställ en fråga nedan och andra användare kommer att svara dig




Bilsats Metra Manualer

Metra

Metra 99-7367HG Bruksanvisning

25 September 2024
Metra

Metra 99-8223 Bruksanvisning

25 September 2024
Metra

Metra 99-7422 Bruksanvisning

25 September 2024
Metra

Metra 99-7875 Bruksanvisning

25 September 2024
Metra

Metra 99-3302 Bruksanvisning

25 September 2024
Metra

Metra 99-5802 Bruksanvisning

25 September 2024
Metra

Metra 99-7874 Bruksanvisning

25 September 2024
Metra

Metra 99-5832G Bruksanvisning

25 September 2024
Metra

Metra 99-9011 Bruksanvisning

25 September 2024
Metra

Metra 99-6000 Bruksanvisning

25 September 2024

Bilsats Manualer

Nyaste Bilsats Manualer