Metra 95-7810B Bruksanvisning

Metra Bilsats 95-7810B

Läs nedan 📖 manual på svenska för Metra 95-7810B (4 sidor) i kategorin Bilsats. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/4
METRA. The World’s best kits.metraonline.com © COPYRIGHT 2015 METRA ELECTRONICS CORPORATION
REV. 12/10/2015 INST95-7810B
CAUTION: Metra recommends disconnecting the negative battery
terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your
local Dealership for more information. All accessories, switches,
climate controls panels, and especially air bag indicator lights
must be connected before reconnecting the battery or cycling
the ignition. Also, do not remove the factory radio with the key
in the on position, or the vehicle running. It would be best to
remove the key from the ignition and then wait a few seconds
before removing the factory radio.
Installation instructions for part 95-7810B
ISO DDIN radio provision
Painted matte black
A) Radio trim panel • B) Radio trim panel brackets • C) Rear support bracket • D (8) #6 x 3/8” Phillips screws
20;-,(;<9,:
20;*64765,5;:
>0905.(5;,55(*655,*;065: (sold separately)
Wiring Harness: • 70-1729 Antenna Adapter:40-HD11
Panel removal tool • Phillips screwdriver
8 mm socket wrench
;663:9,8<09,+
Honda HR-V 2016-up
95-7810B
A C DB
Dash Disassembly ................................................. 2
Kit Assembly
ISO DDIN radio provision ...................................... 3
Table of Contents
95-7810B
2
Dash Disassembly
1. Open the glove box door.
2. Unclip and remove the trim panel
surrounding the radio and a/c vent
located to the left of the radio.
(Figure A)
3. Remove (2) Phillips screws and (1)
8mm screw securing the factory
radio, and then unplug and remove
the radio. (Figure B)
Continue to kit assembly
(Figure A) (Figure B)
95-7810B
1. Attach the radio trim panel brackets
to the using (4) radio trim panel
#6 x 3/8” Phillips screws supplied.
(Figure A)
2. Attach the rear support bracket
to the s radio trim panel bracket
using (4) #6 x 3/8” Phillips screws
supplied. (Figure B)
3. Slide the radio into the completed
assembly, and then secure it to the
assembly using the screws supplied
with the radio. (Figure C)
3
Kit Assembly
(Figure A)
(Figure B)
(Figure C)
4. Locate the factory wiring harness
and antenna connector in the
dash, and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Re-connect the negative
battery terminal and test the radio
for proper operation.
5. Reassemble the dash in reverse
order of disassembly.

Produktspecifikationer

Varumärke: Metra
Kategori: Bilsats
Modell: 95-7810B

Behöver du hjälp?

Om du behöver hjälp med Metra 95-7810B ställ en fråga nedan och andra användare kommer att svara dig




Bilsats Metra Manualer

Metra

Metra 99-7367HG Bruksanvisning

25 September 2024
Metra

Metra 99-8223 Bruksanvisning

25 September 2024
Metra

Metra 99-7422 Bruksanvisning

25 September 2024
Metra

Metra 99-7875 Bruksanvisning

25 September 2024
Metra

Metra 99-3302 Bruksanvisning

25 September 2024
Metra

Metra 99-5802 Bruksanvisning

25 September 2024
Metra

Metra 99-7874 Bruksanvisning

25 September 2024
Metra

Metra 99-5832G Bruksanvisning

25 September 2024
Metra

Metra 99-9011 Bruksanvisning

25 September 2024
Metra

Metra 99-6000 Bruksanvisning

25 September 2024

Bilsats Manualer

Nyaste Bilsats Manualer