Metra 95-8729B Bruksanvisning
Läs nedan 📖 manual på svenska för Metra 95-8729B (4 sidor) i kategorin Bilsats. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/4
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 1/15/19 INST95-8729B
I N S TA L L AT I O N I N S T R U C T I O N S
95-8729B
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
KIT FEATURES
• ISO DDIN radio provision
• Painted black
KIT COMPONENTS
• A) Radio housing • B) Radio trim ring • C) Radio sleeve • D) Radio sleeve assembly hardware • E) Radio screws (4) TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 3mm Allen screwdriver • T-20 Torx screwdriver
• Cutting tool (03-04 models) • File (03-04 models)
TABLE OF CONTENTS
Dash Disassembly
-2003-2004 .............................................................2
-2005-2008.............................................................3
Kit Assembly ..........................................................4
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness:
See metraonline.com for
wiring harness options
Antenna Adapter: 40-EU10 (05-08) • 40-VW12 (03-04)
Steering Wheel Control Interface: • ASWC-1
A B C
Mercedes SL Class 2003-2008
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications
ED
1.800.221.0932
|
MetraOnline.com
2
Attention! The factory radio must have the
AM source selected before being removed
from the vehicle.
Attention! A permanent modification to the
center console trim bezel will be required.
The factory radio will no longer be able to be
reinstalled after this modification.
1. Unclip and remove the left and right
side panels from the center console.
Remove (3) T-20 Torx screws from each
side. (Figures A & B)
2. Engage the parking brake then place
the gear selector in neutral. Pull up on
the gear selector boot just enough to
allow the center console trim bezel to be
removed. (Figure C)
3. Open the center console, then starting
from the back, unclip and release the
entire center console trim bezel which
also wraps around the radio. Lift up just
enough to access the connectors from
underneath. Unplug all connectors, then
remove the trim bezel. (Figure D)
4. Remove (2) T-20 Torx screws securing
the cup holders, then slide the cup
holders out and remove them. (Figure E)
5. Remove (4) T-20 Torx screws securing
the radio. Slide the radio out, then
unplug and remove the radio.
6. Dash Modification: Cut the center
console trim bezel to the left and right
side of the bottom of the radio opening,
slightly above the cup holders. These
cuts will have to be perfect as they
will be visible. Cut the trim bezel just
enough to allow room for the kit. It may
be best to leave a little extra, then file
the rest. (Figure F)
Continue to Kit Assembly
DASH DISASSEMBLY (2003-2004)
(Figure A) (Figure D)
(Figure B) (Figure E)
(Figure C) (Figure F)
REV. 1/15/2019 INST95-8729B 3
Attention! The factory radio must have the
AM source selected before being removed
from the vehicle.
1. Unclip and remove the left and right
side panels from the center console.
Remove (3) T-20 Torx screws from each
side. (Figures A & B)
2. Open both cup holders, then unsnap the
trim covers from each cup holder. Push
the cup holders back in, without their
covers. (Figure C)
3.
Engage the parking brake then place the
gear selector in neutral. Pull up on the gear
selector boot just enough to allow the center
console trim bezel to be removed. (Figure D)
4. Open the center console, then starting
from the back, unclip and release the
center console trim bezel just enough to
access the connectors from underneath.
Unplug all connectors, then remove the
trim bezel. (Figure E)
Note: The trim bezel can also be rotated
90-degrees and left connected.
5. Remove (2) T-20 Torx screws securing
the cup holders, then slide the cup
holders out and remove them. (Figure F)
6. Press in on the (2) plastic clips below the
radio to release the radio. Slide the radio
out, then unplug and remove the radio.
(Figure G)
Note: There are (2) metal tabs on top
of the radio. After the radio has been
released, the radio should drop down
enough for these tabs to clear the dash.
Continue to Kit Assembly
DASH DISASSEMBLY (2005-2008)
(Figure A)
(Figure B)
(Figure C)
(Figure D)
(Figure E)
(Figure F)
(Figure G)
Produktspecifikationer
| Varumärke: | Metra |
| Kategori: | Bilsats |
| Modell: | 95-8729B |
Behöver du hjälp?
Om du behöver hjälp med Metra 95-8729B ställ en fråga nedan och andra användare kommer att svara dig
Bilsats Metra Manualer
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
Bilsats Manualer
- Bilsats Motorola
- Bilsats Nokia
- Bilsats Pioneer
- Bilsats Siemens
- Bilsats Alpine
- Bilsats Silvercrest
- Bilsats Nedis
- Bilsats Gembird
- Bilsats Pyle
- Bilsats Livoo
- Bilsats BeeWi
- Bilsats Caliber
- Bilsats Manhattan
- Bilsats Thule
- Bilsats Hama
- Bilsats Parrot
- Bilsats Maginon
- Bilsats Envivo
- Bilsats Uniden
- Bilsats Technaxx
- Bilsats Bury
- Bilsats T'nB
- Bilsats SuperTooth
- Bilsats Veho
- Bilsats Mr Handsfree
- Bilsats HQ
- Bilsats Scosche
- Bilsats PAC
- Bilsats Urban Revolt
- Bilsats Iluv
- Bilsats KRAM
- Bilsats NAV-TV
- Bilsats Ergotron
- Bilsats Havis
- Bilsats Kogan
- Bilsats Interphone-Cellularline
- Bilsats Arkon
- Bilsats I-Tec
- Bilsats Hamron
- Bilsats Brodit
Nyaste Bilsats Manualer
19 Oktober 2024
6 Oktober 2024
2 Oktober 2024
29 September 2024
25 September 2024
25 September 2024
23 September 2024
23 September 2024
23 September 2024
23 September 2024