Metra 95-8732B Bruksanvisning

Metra Bilsats 95-8732B

Läs nedan 📖 manual på svenska för Metra 95-8732B (5 sidor) i kategorin Bilsats. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/5
Metra. The World’s Best Kits.®MetraOnline.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 1/27/20 INST95-8732B
I N S TA L L AT I O N I N S T R U C T I O N S
95-8732B
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
KIT FEATURES
ISO DDIN radio provision
Painted scratch-resistant matte black
KIT COMPONENTS
• A) Radio bezel • B) Radio brackets • C) Phillips screws (4)
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Socket wrench • T-25 Torx driver
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wire harness: AX-MC90132 (2009 model only)
Antenna adapter: 40-EU10 (03-08)
• 40-EU56 (2009)
A B C
Mercedes (W211) E Class 2003-2009
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications
1.800.221.0932
|
MetraOnline.com
2
DASH DISASSEMBLY
1. Unclip and pull upwards on the gear
shifter boot just enough to allow the
gear shifter panel to be removed in the
following step. (Figure A)
2. Unclip the gear shifter panel from the
front, then slide forward to release
the hooks from the rear of the panel.
Unplug, and remove the panel.
(Figure B)
3. Open the ashtray, then unclip, unplug,
and remove the entire assembly.
(Figure C)
4. Remove (2) screws securing the hazard
& switch panel, then unclip, unplug, and
remove. (Figure D)
5. Unscrew clockwise, (2) screws
underneath the radio, just enough to
release it from the dash. Pull rearward
on the radio every couple of full turns
until the radio comes loose. Slide the
radio out, then unplug and remove.
(Figure E)
Continue to Kit Assembly
(Figure A)
(Figure B)
(Figure C)
(Figure E)
(Figure D)
REV. 1/27/2020 INST95-8732B 3
1. Secure the radio brackets to the radio
bezel using (4) Phillips screws provided.
(Figure A)
2. Slide the radio into the bracket/bezel
assembly, then secure using screws
supplied with the radio. (Figure B)
3. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
4. Slide the radio assembly into the dash.
Secure by turning the radio screws just
enough to secure the radio in place. Do
not overtighten. (Figure C)
5. Reassemble the dash in reverse
order of disassembly to complete the
installation.
KIT ASSEMBLY
(Figure A) (Figure C)(Figure B)

Produktspecifikationer

Varumärke: Metra
Kategori: Bilsats
Modell: 95-8732B

Behöver du hjälp?

Om du behöver hjälp med Metra 95-8732B ställ en fråga nedan och andra användare kommer att svara dig




Bilsats Metra Manualer

Metra

Metra 99-7367HG Bruksanvisning

25 September 2024
Metra

Metra 99-8223 Bruksanvisning

25 September 2024
Metra

Metra 99-7422 Bruksanvisning

25 September 2024
Metra

Metra 99-7875 Bruksanvisning

25 September 2024
Metra

Metra 99-3302 Bruksanvisning

25 September 2024
Metra

Metra 99-5802 Bruksanvisning

25 September 2024
Metra

Metra 99-7874 Bruksanvisning

25 September 2024
Metra

Metra 99-5832G Bruksanvisning

25 September 2024
Metra

Metra 99-9011 Bruksanvisning

25 September 2024
Metra

Metra 99-6000 Bruksanvisning

25 September 2024

Bilsats Manualer

Nyaste Bilsats Manualer