Metra 99-5025 Bruksanvisning
Läs nedan 📖 manual på svenska för Metra 99-5025 (4 sidor) i kategorin Bilsats. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/4
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
The World’s best kits.MetraOnline.com © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION REV. 7/11/17 INST99-5025
I N S TA L L A T I O N I N S T R U C T I O N S
99-5025
KIT FEATURES
• ISO DIN radio provision with pocket
KIT COMPONENTS
• A) Radio brackets • B Trim plate • C) (4) #8 x 1” Philips screws •D) Pocket • E) (4) #8 x 3/8” Phillips screws TOOLS REQUIRED
• Phillips screwdriver
• Radio removal tools 86-5618
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly
–ISO DIN radio provision with pocket ..................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: 70-1770 • 70-1768 (amplified models)
Antenna Adapter: Not required
A B C D
Ford Mustang 1987-1993
E
1.800.221.0932
|
MetraOnline.com
2
1. Using Metra’s 86-5618, pull the factory
radio from the dash and disconnect the
wiring. (Figure A)
2. Remove (2) 7/16” hex bolts from inside
the dash cavity and remove the radio
subdash bracket. (Figure B)
Note:
The threaded studs from under this
bracket will also need to be removed for
the aftermarket radio to clear
.
Continue to Kit Assembly
ALSO REMOVE (2) THREADED STUDS FROM UNDER BRACKET
7/16” (2)
HEX BOLTS
RADIO SUB-DASH BRACKET
(Figure B)(Figure A)
DASH DISASSEMBLY
REV. 7/11/2017 INST99-5025 3
(Figure A) (Figure B)
KIT ASSEMBLY
ISO DIN radio provision with pocket
1. Secure the
radio brackets
to the radio
using the screws supplied with the
radio. (Figure A)
2. Secure the
pocket
to the radio assembly
using the (4) #8 x 3/8” Phillips screws
provided. (Figure A)
3. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra. Test
the radio for proper operation.
4. Secure the
trim plate
to the completed
assembly, and also to the vehicle, using
the (4) #8 x 1” Phillips screws provided.
(Figure B)
Produktspecifikationer
| Varumärke: | Metra |
| Kategori: | Bilsats |
| Modell: | 99-5025 |
Behöver du hjälp?
Om du behöver hjälp med Metra 99-5025 ställ en fråga nedan och andra användare kommer att svara dig
Bilsats Metra Manualer
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
Bilsats Manualer
- Bilsats Motorola
- Bilsats Nokia
- Bilsats Pioneer
- Bilsats Siemens
- Bilsats Alpine
- Bilsats Silvercrest
- Bilsats Nedis
- Bilsats Gembird
- Bilsats Pyle
- Bilsats Livoo
- Bilsats BeeWi
- Bilsats Caliber
- Bilsats Manhattan
- Bilsats Thule
- Bilsats Hama
- Bilsats Parrot
- Bilsats Maginon
- Bilsats Envivo
- Bilsats Uniden
- Bilsats Technaxx
- Bilsats Bury
- Bilsats T'nB
- Bilsats SuperTooth
- Bilsats Veho
- Bilsats Mr Handsfree
- Bilsats HQ
- Bilsats Scosche
- Bilsats PAC
- Bilsats Urban Revolt
- Bilsats Iluv
- Bilsats KRAM
- Bilsats NAV-TV
- Bilsats Ergotron
- Bilsats Havis
- Bilsats Kogan
- Bilsats Interphone-Cellularline
- Bilsats Arkon
- Bilsats I-Tec
- Bilsats Hamron
- Bilsats Brodit
Nyaste Bilsats Manualer
19 Oktober 2024
6 Oktober 2024
2 Oktober 2024
29 September 2024
25 September 2024
25 September 2024
23 September 2024
23 September 2024
23 September 2024
23 September 2024